AND262GCP

AND262GCP Ultra Bright LED Lamps: Type 1 Weight: 0.14 g Unit: mm AND262GCP GaP Green Light Emission T-1 Package (3 mm) Features • High efficient green LED • Peak wavelength (λp = 567 nm) high bright emission • All plastic mold type, clear colorless lens • Low drive current: 10 to 20 mA recommended • Excellent On-Off contrast ratio • Fast response time, capable of pulse operation • RoHS Compliant Maximum Ratings (Ta = 25°C) Characteristics Forward Current 2.54 Cathode Index 0.5 12 5.1 1.5 TYP 24.0 MIN. 4.1 3.0 0.5±0.5 1.0 0.5 Symbol IF VR PD TOpr TStg Rating 30 5 75 -25 to 85 -25 to 85 Unit mA V mW °C °C Reverse Voltage Power Dissipation Operating Temperature Range 1. Anode 2. Cathode Storage Temperature Range Electro-Optical Characteristics (Ta = 25°C) Characteristics Forward Voltage Reverse Current Luminous Intensity Peak Emission Wavelength Spectral Line Half Width Dominant Wavelength Full Viewing Angle Symbol VF IR IV lP ∆λ λd θ Test Condition IF = 20 mA VR = 4 V IF = 20 mA IF = 20 mA IF = 20 mA IF = 20 mA IV = 1/2 Peak Minimum – – 70 – – – – Typical 2.2 – 110 567 25 563 36 Maximum 2.6 50 – – – – – Unit V µA mcd nm nm nm degree Precaution Please be careful of the following: 1. Soldering temperature: 260°C max Soldering time: 5 sec. max Soldering portion of lead: up to 1.6 mm from the body of the device 2. The lead can be formed up to 5 mm from the body of the device without forming stress. Soldering should be performed after the lead forming. Product specifications contained herein may be changed without prior notice. It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product. Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • sales@purdyelectronics.com • www.purdyelectronics.com 7/18/07 AND262GCP GaP Green Light Emission IF – VF 50 Ta = 25°C Luminous Intensity IV (mcd) 300 Ta = 25°C 100 50 30 Ultra Bright LED Lamps: Type 1 IV – VF 20 Forward Current IF (mA) 10 5 3 10 5 1 1.7 1.8 1.9 2.0 2.1 Forward Voltage VF (V) 2.2 2.3 2.4 2 1 3 5 10 30 50 100 300 Forward Current IF (mA) IV – TC 3 Relative Luminous Intensity 1.0 Relative Luminous Intensity – Wavelength IF = 20 mA Ta = 25°C Relative Luminous Intensity 0.8 1 0.5 0.3 0.6 0.4 0.2 0 520 0.1 -20 0 20 40 60 80 Case Temperature TC (°C) 540 560 580 600 620 640 Wavelength λ (nm) Radiation Pattern 40 10° 0° 10° Ta = 25°C 20° 30° 40° 50° 60° 70° 80° 90° 0 0.2 0.4 0.6 0.8 0 0 Allowable Forward Current IF (mA) IF – Ta 30° 40° 50° 60° 70° 80° 90° 20° 30 20 10 20 40 60 80 Ambient Temperature Ta (°C) 100 Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • sales@purdyelectronics.com • www.purdyelectronics.com 7/18/07