AND262HAP

AND262HAP Ultra Bright LED Lamps: Type 3 Weight: 0.14 g Unit: mm AND262HAP InGaAlP Amber Light Emission T-1 Package (3 mm) Features • High efficient amber LED • Peak wavelength (λp = 612 nm) high bright emission • All plastic mold type, clear colorless lens • Low drive current: 1-20 mA recommended • Excellent On-Off contrast ratio • Fast response time, capable of pulse operation • RoHS Compliant Maximum Ratings (Ta = 25°C) Characteristics Forward Current Reverse Voltage Power Dissipation Operating Temperature Range Storage Temperature Range Symbol IF VR PD TOpr TStg Rating 25 5 60 -25 to 85 -30 to 100 Unit mA V mW °C °C Electro-Optical Characteristics (Ta = 25°C) Characteristics Forward Voltage Reverse Current Luminous Intensity Peak Emission Wavelength Spectral Line Half Width Dominant Wavelength Full Viewing Angle Symbol VF IR IV λP ∆λ λd θ Test Condition IF = 20 mA VR = 5 V IF = 20 mA IF = 20 mA IF = 20 mA IF = 20 mA IV = 1/2 Peak Minimum – – 240 – – – – Typical 2.0 – 390 612 17 605 40 Maximum 2.4 50 – – – – – Unit V µA mcd nm nm nm degree Precaution Please be careful of the following: 1. Soldering temperature: 260°C max Soldering time: 5 sec. max Soldering portion of lead: up to 1.6 mm from the body of the device 2. The lead can be formed up to 5 mm from the body of the device without forming stress. Soldering should be performed after the lead forming. Product specifications contained herein may be changed without prior notice. It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product. Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • sales@purdyelectronics.com • www.purdyelectronics.com 6/12/07 AND262HAP InGaAlP Amber Light Emission IF – VF 50 Luminous Intensity IV (mcd) 3000 Ta = 25°C 1000 500 300 Ultra Bright LED Lamps: Type 3 IV – IF Forward Current IF (mA) 30 Ta = 25°C 10 5 3 100 50 1 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 20 1 3 5 10 30 50 100 300 Forward Current IF (mA) Forward Voltage VF (V) IV – TC 3 1.0 Relative Luminous Intensity Relative Luminous Intensity – Wavelength IF = 20 mA Ta = 25°C Relative Luminous Intensity 0.8 1 0.5 0.3 0.6 0.4 0.2 0 570 590 610 630 650 670 Wavelength λ (nm) 0.1 -20 0 20 40 60 80 Case Temperature TC (°C) Radiation Pattern 40 10° 0° 10° Ta = 25°C 20° 30° 40° 50° 60° 70° 80° 90° 0 0.2 0.4 0.6 0.8 0 0 Allowable Forward Current IF (mA) IF – Ta 30° 40° 50° 60° 70° 80° 90° 20° 30 20 10 20 40 60 80 Ambient Temperature Ta (°C) 100 Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • sales@purdyelectronics.com • www.purdyelectronics.com 6/12/07