AND4BRA

AND4BRA Ultra Bright LED Lamps Weight: 2.0 mgUnit: mm AND4BRA GaN Ultra Bright Blue Chip LEDs with Right Angle Lens Features • RoHS Compliant • Package in 8mm tape on 7: dia. reel • Compatible with automatic placement equipment • Suitable for infrared and vapor phase reflow solder process • Mono-color type • Suitable for automotive backlighting, Flat backlighting for LDC, switch and symbol, indicator and backlighting for telecommunication use Maximum Ratings (Ta = 25°C) Characteristics Forward Current Reverse Voltage Symbol IF VR PD TOpr TStg Rating 30 5 140 -20 to 80 -30to 90 Unit mA V mW °C °C Product specifications contained herein may be changed without prior notice. It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product. Power Dissipation Operating Temp. Range Storage Temp. Range Electro-Optical Characteristics (Ta = 25°C) Characteristics Forward Voltage Reverse Current Luminous Intensity Peak Emission Wavelength Spectral Line Half Width Dominant Wavelength Full Viewing Angle Precaution Symbol VF IR IV lP ∆l ld 2 q 1/2 Test Condition IF = 20 mA VR = 5 V IF = 20 mA IF = 20 mA IF = 20 mA IF = 20 mA IF = 20 mA Minimum – – 17 – – – – Typical 3.8 – 22 428 65 466 120 Maximum 4.5 50 – – – – – Unit V µA mcd nm nm nm degree 3. Absolute secure counter measures against Please be careful of the following: static electricity and surge should be taken 1. Manual soldering: maximum temperature of iron tip: 260°C max. when handling these products. It is Soldering time: within 5 sec. per solder-land recommended to use wrist band or antistatic Soldering portion of lead: up to 1.6 mm from the body of the device gloves when handling these LEDs. 2. Reflow solder: recommended condition is as follows: 10 sec. max. Temperature 140 - 160°C 230°C max. more than 2 min. Time 4°C/sec. max. Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • sales@purdyelectronics.com 7/18/07 www.purdyelectronics.com AND4BRA GaN Ultra Bright Blue Chip LEDs with Right Angle Lens IF – VF 50 100 50 Ta = 25°C Ultra Bright LED Lamps IV – IF 40 Luminous Intensity IV (mcd) Forward Current IF (mA) 30 30 10 5 3 20 10 1 2.8 3.2 3.6 4.0 4.4 1 3 4.8 10 5 30 50 Forward Current IF (mA) 100 Forward Voltage VF (V) 1000 Ta = 25°C IV – TC 1.0 Relative Luminous Intensity – Wavelength IF = 20 mA Ta = 25°C Relative Luminous Intensity -20 0 20 40 60 80 Relative Luminous Intensity 100 0.8 0.6 0.4 10 1 0.2 0 350 400 Case Temperature TC (°C) 500 450 550 Wavelength λ (nm) 600 Radiation Pattern 40 10° 0° 10° Ta = 25°C 20° 30° 40° 50° 60° 70° 80° 90° 0 0.2 0.4 0.6 0.8 0 0 IF – Ta 30° 40° 50° 60° 70° 80° 90° 20° Allowable Forward Current IF (mA) 30 20 10 20 40 60 80 Ambient Temperature Ta (°C) 100 Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • sales@purdyelectronics.com 7/18/07 www.purdyelectronics.com