AND4OA

AND4OA Ultra Bright LED Lamps: Type 2 Weight: 2.0 mg Unit: mm AND4OA Cathode Index 1.25 1.1 0.6 InGaAlP Ultra Bright Orange Light Emission Surface Mount Package Features • RoHS Compliant • Small package size • 2.0 (l) x 1.25 (w) x 1.1 (h) size • Suitable for DIP and REFLOW soldering • Recommended Forward Current: 10 mA Maximum Ratings (Ta = 25°C) Characteristics Symbol IF VR PD TOpr TStg 2.0 1.4 Rating 25 4 62.5 -30 to 85 -30 to 85 Unit mA V mW °C °C 0.4±0.2 Forward Current Reverse Voltage Power Dissipation Polarity R0.2 Operating Temperature Range Storage Temperature Range Electro-Optical Characteristics (Ta = 25°C) Characteristics Forward Voltage Reverse Current Luminous Intensity Peak Emission Wavelength Spectral Line Half Width Dominant Wavelength Full Viewing Angle Precaution Symbol VF IR IV lP ∆λ λd θ Test Condition IF = 20 mA VR = 4 V IF = 20 mA IF = 20 mA IF = 20 mA IF = 20 mA IV = 1/2 Peak Minimum – – 27 – – – – Typical 2.0 – 60 612 15 605 140 Maximum 2.8 100 – – – – – Unit V µA mcd nm nm nm degree Please be careful of the following: 1. Manual soldering: maximum temperature of iron tip: 260°C max. Soldering time: within 5 sec. per solder-land Soldering portion of lead: up to 1.6 mm from the body of the device 2. Reflow solder: recommended condition is as follows: 10 sec. max. Temperature 140 - 160°C 230°C max. Product specifications contained herein may be changed without prior notice. It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product. The following soldering patterns are recommended for reflow and dip soldering Reflow Dip 1.75 1.25 1.1 1.25 6/12/07 more than 2 min. Time 4°C/sec. max. 1.25 1.1 1.25 Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • sales@purdyelectronics.com • www.purdyelectronics.com 1.1 AND4OA InGaAlP Ultra Bright Orange Light Emission IF – VF 50 Forward Current IF (mA) 30 Luminous Intensity IV (mcd) Ultra Bright LED Lamps: Type 2 IV – IF 100 50 30 Ta = 25°C Ta = 25°C 10 5 3 10 5 3 1 1.5 1 1.6 1.7 1.8 1.9 2.0 2.1 2.2 1 3 Forward Voltage VF (V) 10 5 30 50 Forward Current IF (mA) 100 IV – TC 3 Relative Luminous Intensity 1.0 Relative Luminous Intensity – Wavelength IF = 20 mA Ta = 25°C Relative Luminous Intensity 0.8 1 0.5 0.3 0.6 0.4 0.2 0 570 0.1 -20 0 20 40 60 80 Case Temperature TC (°C) 590 610 630 650 670 Wavelength λ (nm) Radiation Pattern 40 10° 0° 10° Ta = 25°C 20° 30° 40° 50° 60° 70° 80° 90° 0 0.2 0.4 0.6 0.8 0 0 Allowable Forward Current IF (mA) IF – Ta 30° 40° 50° 60° 70° 80° 90° 20° 30 20 10 20 40 60 80 Ambient Temperature Ta (°C) 100 Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • sales@purdyelectronics.com • www.purdyelectronics.com 6/12/07