AND5610

OPTOELECTRONICS Unit: mm LED Displays Product specifications contained herein may be changed without prior notice. It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product. 8° 8.13 1.4 8.0 0.5 Dia. 10 A 6 19.05 14.22 G 15.24 F E 1D 12.4 B C DP 5 1.68 Dia. AND-5610 Series GaAsP/GaP–Red; GaP–Green 7 Segment, 0.56 Inch Features • RoHS Compliant • 0.56 inch character height • Available in red or green • Suitable for numerical readout for instrument and industrial products • Industry pin-for-pin compatibility • Available in both common cathode and common anode Common Color Anode AND-5610SAL AND-5610GAL 3.5 Min. 2.54 x 4 = 10.16 Description Size 0.56 inch 0.56 inch Number of Digits 1 1 Cathode AND-5610SCL AND-5610GCL Display Red Green Face Red Gray Number of Pins 10 10 Absolute Maximum Ratings (T = 25°C) Characteristics DC Forward Current/Segment Pulse Forward Current/Segment Reverse Voltage/Segment Operating Temperature Range Storage Temperature Range Symbol IF(DC)/SEG IFP/SEG VR TOpr TStg Rating 30 100 3 (Red), 5 (Green) -25 to 85 -25 to 100 Unit mA mA V °C °C Electro-Optical Characteristics (T = 25°C) Characteristics Forward Voltage Reverse Current Luminous Intensity Per Segment Peak Emission Wavelength Spectral Line Half Width Red Green Red Green Red Green Symbol VF IR IV IV λP λP ∆λ ∆λ Test Condition IF = 10 mA VR = 3 (Red), 5 (Green) IF = 10 mA IF = 10 mA IF = 10 mA IF = 10 mA IF = 10 mA IF = 10 mA Minimum – – 2.0 1.7 – – – – Typical 2.1 – 3.3 2.9 635 567 40 30 Maximum 3.0 100 – – – – – – Unit V µA mcd mcd nm nm nm nm Precaution Please be careful of the following: 1. Soldering temperature: 260°C max; Soldering time: 3 sec. max; Soldering portion of lead: up to 2 mm from the body of the device. 2. The lead can be formed up to 5 mm from the body of the device without forming stress. Soldering should be performed after the lead forming. Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • email@purdyelectronics.com • www.purdyelectronics.com 7/18/07 AND-5610 Series GaAsP/GaP–Red; GaP–Green LED Displays IV vs. TC 3 Relative Luminous Intensity IV Forward Current IF/Seg (mA) 2 50 40 30 20 10 5 4 3 2 1 1.6 IF/Seg vs. VF TA = 25°C 1 0.5 0.4 0.3 -20 0 20 40 60 80 Case Temperature TC (°C) 100 1.8 2.0 2.2 Forward Voltage (V) 2.4 2.6 IFMAX/Seg vs. TA 36 Luminous Intensity IV/Seg (mcd) Maximum Forward Current IFMAX/Seg (mA) 30 24 18 12 6 0 0 20 40 60 80 100 Direct Current TA = 25°C 10 5.0 3.0 IV/Seg vs. IF/Seg Green Red 1.0 0.5 1 2 345 7 10 Forward Current IF/Seg (mA) 20 30 Ambient Temperature TA (°C) AND-5610 Series Pin Connection Table AND-5610SCL/GCL Pin 1 2 3 4 5 AND-5610SAL/GAL Connection Pin 1 2 3 4 5 Connection Anode E Anode D Common Cathode Anode C Anode Dp Pin 6 7 8 9 10 Connection Cathode E Cathode D Common Anode Cathode C Cathode Dp Pin 6 7 8 9 10 Connection Cathode B Cathode A Common Anode Cathode F Cathode G Anode B Anode A Common Cathode Anode F Anode G Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • email@purdyelectronics.com • www.purdyelectronics.com 7/18/07