AND5BA

AND5BA Ultra Bright LED Lamps Weight: 2.0 Unit: mm Product specifications contained herein may be changed without prior notice. It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product. Cathode Index R0.9±0.1 AND5BA 2.2±0.1 3.2±0.2 GaN Ultra Bright Blue Light Emission Surface Mount Package Features • RoHS Compliant • Small package size with dome lens • 3.2 (l) x 2.4 (w) x 2.6 (h) size • Suitable for REFLOW soldering • Recommended Forward Current: 10 mA Maximum Ratings (Ta = 25°C) Characteristics Symbol IF VR PD TOpr TStg ø1.8±0.1 0.5±0.1 2.4±0.1 0.5±0.1 2.5±0.2 Rating 30 4 100 -30 to 85 -30to 90 Unit mA V mW °C °C 2.0 Forward Current Reverse Voltage Polarity Power Dissipation Operating Temperature Range Storage Temperature Range Electro-Optical Characteristics (Ta = 25°C) Characteristics Forward Voltage Reverse Current Luminous Intensity Peak Emission Wavelength Spectral Line Half Width Dominant Wavelength Full Viewing Angle Precaution Symbol VF IR IV lP ∆l ld θ Test Condition IF = 20 mA VR = 4 V IF = 20 mA IF = 20 mA IF = 20 mA IF = 20 mA IV = 1/2 Peak Minimum – – 90 – – – – Typical 3.8 – 112 430 65 450 30 Maximum 4.5 100 – – – – – Unit V µA mcd nm nm nm degree Please be careful of the following: 1. Manual soldering: maximum temperature of iron tip: 260°C max. Soldering time: within 5 sec. per solder-land Soldering portion of lead: up to 1.6 mm from the body of the device 2. Reflow solder: recommended condition is as follows: 10 sec. max. Temperature 140 - 160°C 230°C max. 3. Absolute secure counter measures against static electricity and surge should be taken when handling these products. It is recommended to use wrist band or antistatic gloves when handling these LEDs. The following soldering patterns are recommended for reflow soldering Reflow more than 2 min. Time 4°C/sec. max. 2.5 2.0 2.5 Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • sales@purdyelectronics.com 2.5 7/18/07 www.purdyelectronics.com AND5BA GaN Ultra Bright Blue Light Emission Surface Mount Package IF – VF 50 1000 Ta = 25°C IV – IF Ultra Bright LED Luminous Intensity IV (mcd) 2.5 3.0 3.5 4.0 4.5 5.0 Forward Current IF (mA) 30 Ta = 25°C 500 300 10 5 3 100 50 30 1 1.5 10 2.0 1 3 5 10 30 50 100 Forward Voltage VF (V) Forward Current IF (mA) IV – TC 3 Relative Luminous Intensity – Wavelength IF = 20 mA Ta = 25°C Relative Luminous Intensity Relative Luminous Intensity -20 0 20 40 60 80 100 1 0.5 0.3 75 50 25 0 300 350 500 450 400 Wavelength λ (nm) 550 0.1 Case Temperature TC (°C) Radiation Pattern 40 10° 0° 10° Ta = 25°C 20° 30° 40° 50° 60° 70° 80° 90° 0 0.2 0.4 0.6 0.8 0 0 IF – Ta 30° 40° 50° 60° 70° 80° 90° 20° Allowable Forward Current IF (mA) 30 20 10 20 40 60 80 Ambient Temperature Ta (°C) 100 Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94086 Tel: 408.523.8200 • Fax: 408.733.1287 • sales@purdyelectronics.com 7/18/07 www.purdyelectronics.com