AND5GA

AND5GA Ultra Bright LED Lamps: Type 2 Weight: 2.0 Unit: mm Product specifications contained herein may be changed without prior notice. It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product. Cathode Index R0.9±0.1 AND5GA GaP Ultra Bright Green Light Emission Surface Mount Package Features • RoHS Compliant • Small package size with dome lens • 3.2 (l) x 2.4 (w) x 2.6 (h) size • Suitable for REFLOW soldering • Recommended Forward Current: 10 mA Maximum Ratings (Ta = 25°C) Characteristics Symbol IF VR PD TOpr TStg 2.2±0.1 ø1.8±0.1 3.2±0.2 0.5±0.1 2.4±0.1 0.5±0.1 2.5±0.2 Rating 25 5 60 -40 to 85 -40to 90 Unit mA V mW °C °C 2.0 Forward Current Reverse Voltage Polarity Power Dissipation Operating Temperature Range Storage Temperature Range Electro-Optical Characteristics (Ta = 25°C) Characteristics Forward Voltage Reverse Current Luminous Intensity Peak Emission Wavelength Spectral Line Half Width Dominant Wavelength Full Viewing Angle Precaution Symbol VF IR IV lP ∆λ λd θ Test Condition IF = 20 mA VR = 5 V IF = 20 mA IF = 20 mA IF = 20 mA IF = 20 mA IV = 1/2 Peak Minimum – – 75 – – – – Typical 2.1 – 125 570 30 571 30 Maximum 2.4 10 – – – – – Unit V µA mcd nm nm nm degree Please be careful of the following: 1. Manual soldering: maximum temperature of iron tip: 260°C max. Soldering time: within 5 sec. per solder-land Soldering portion of lead: up to 1.6 mm from the body of the device 2. Reflow solder: recommended condition is as follows: 10 sec. max. Temperature 140 - 160°C 230°C max. The following soldering patterns are recommended for reflow soldering Reflow 4°C/sec. max. more than 2 min. Time 2.5 2.0 2.5 Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • sales@purdyelectronics.com • www.purdyelectronics.com 2.5 7/18/07 AND5GA GaP Ultra Bright Green Light Emission IF – VF 50 Luminous Intensity IV (mcd) 1000 Ta = 25°C Ultra Bright LED Lamps: Type 2 IV – IF Forward Current IF (mA) 30 Ta = 25°C 500 300 10 5 3 100 50 30 1 1.6 10 1.7 1.8 1.9 2.0 2.1 2.2 2.3 1 3 5 10 30 50 100 Forward Voltage VF (V) Forward Current IF (mA) IV – TC 3 Relative Luminous Intensity 1.0 Relative Luminous Intensity – Wavelength IF = 20 mA Ta = 25°C Relative Luminous Intensity 0.8 1 0.5 0.3 0.6 0.4 0.2 0 520 0.1 -20 0 20 40 60 80 540 560 580 600 620 640 Case Temperature TC (°C) Wavelength λ (nm) Radiation Pattern 40 10° 0° Ta = 25°C 20° 30° 40° 50° 60° 70° 80° 90° 0 0.2 0.4 0.6 0.8 0 0 Allowable Forward Current IF (mA) IF – Ta 20° 30° 40° 50° 60° 70° 80° 90° 10° 30 20 10 20 40 60 80 Ambient Temperature Ta (°C) 100 Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • sales@purdyelectronics.com • www.purdyelectronics.com 7/18/07