AND6BA

AND6BA Ultra Bright LED Lamps Weight: 2.0 Unit: mm AND6BA GaN Ultra Bright Blue Light Emission Surface Mount Pkg Features • RoHS Compliant • P-LCC-2 package with optical indicator • Wide viewing angle • Suitable for vapor-phase refow, infrared refow and wave solder processes • Low current operation: 2 mA • Ideal for (LCD) backlight & light pipe applications • Compatible with automatic placement equipment Maximum Ratings (Ta = 25°C) Characteristics Forward Current Reverse Voltage Product specifications contained herein may be changed without prior notice. It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product. Power Dissipation Operating Temperature Range Storage Temperature Range Symbol IF VR PD TOpr TStg Rating 30 5 120 -20 to 80 -30to 90 Unit mA V mW °C °C Electro-Optical Characteristics (Ta = 25°C) Characteristics Forward Voltage Reverse Current Luminous Intensity Peak Emission Wavelength Spectral Line Half Width Dominant Wavelength Full Viewing Angle Precaution Symbol VF IR IV lP ∆l ld 2 q 1/2 Test Condition IF = 20 mA VR = 5 V IF = 20 mA IF = 20 mA IF = 20 mA IF = 20 mA IF = 20 mA Minimum – – 35 – – – – Typical 3.8 – 55 428 65 466 120 Maximum 4.5 50 – – – – – Unit V µA mcd nm nm nm degree Please be careful of the following: 1. Manual soldering: maximum temperature of iron tip: 260°C max. Soldering time: within 5 sec. per solder-land Soldering portion of lead: up to 1.6 mm from the body of the device 2. Reflow solder: recommended condition is as follows: 10 sec. max. Temperature 140 - 160°C 230°C max. 3. Absolute secure counter measures against static electricity and surge should be taken when handling these products. It is recommended to use wrist band or antistatic gloves when handling these LEDs. more than 2 min. Time 4°C/sec. max. Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • sales@purdyelectronics.com 7/18/07 www.purdyelectronics.com AND6BA GaN Ultra Bright Blue Light Emission Surface Mount Pkg IF – VF 50 1000 Ta = 25°C Ultra Bright LED Lamps IV – IF Luminous Intensity IV (mcd) 40 Forward Current IF (mA) 100 30 10 20 1 10 2.0 2.5 3.0 3.5 4.0 4.5 1 2 5 10 20 50 100 Forward Voltage VF (V) Forward Current IF (mA) 1000 Ta = 25°C IV – TC 100 Relative Luminous Intensity – Wavelength IF = 20 mA Ta = 25°C Relative Luminous Intensity 100 Relative Luminous Intensity -20 0 20 40 60 80 75 10 50 25 1 0 350 400 450 500 550 Wavelength λ (nm) Case Temperature TC (°C) Radiation Pattern 40 10° 0° 10° Ta = 25°C 20° 30° 40° 50° 60° 70° 80° 90° 0 0.2 0.4 0.6 0.8 0 0 IF – Ta 30° 40° 50° 60° 70° 80° 90° 20° Allowable Forward Current IF (mA) 30 20 10 20 40 60 80 Ambient Temperature Ta (°C) 100 Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • sales@purdyelectronics.com 7/18/07 www.purdyelectronics.com