MOC8080

PHOTODARLINGTON OPTOCOUPLERS DESCRIPTION The CNX48U, H11BX, MOC8080 and TIL113 have a gallium arsenide infrared emitter optically coupled to a silicon planar photodarlington. CNX48U H11B1 MOC8080 TIL113 H11B2 H11B255 H11B3 FEATURES • High sensitivity to low input drive current • Meets or exceeds all JEDEC Registered Specifications • VDE 0884 approval available as a test option -add option .300. (e.g., H11B1.300) 6 1 6 1 ANODE 1 6 BASE SCHEMATIC APPLICATIONS • • • • • Low power logic circuits 6 Telecommunications equipment Portable electronics Solid state relays Interfacing coupling systems of different potentials and impedances. CATHODE 2 5 COLLECTOR 1 N/C 3 4 EMITTER Parameter TOTAL DEVICE Storage Temperature Operating Temperature Lead Solder Temperature Total Device Power Dissipation @ TA = 25°C Derate above 25°C EMITTER Continuous Forward Current Reverse Voltage Forward Current - Peak (300 µs, 2% Duty Cycle) LED Power Dissipation @ TA = 25°C Derate above 25°C DETECTOR Symbol TSTG TOPR TSOL PD IF VR IF(pk) PD Device All All All All All All All All CNX48U, TIL113 H11B1, H11B2 Value -55 to +150 -55 to +100 260 for 10 sec 250 3.3 100 6 3.0 100 1.8 30 25 55 Units °C °C °C mW mW/°C mA V A mW mW/°C Collector-Emitter Breakdown Voltage BVCEO H11B3 H11B255 MOC8080 CNX48U, H11B1 H11B2, H11B3 V 30 V Collector-Base Breakdown Voltage BVCBO TIL113 H11B255 MOC8080 55 7 150 2.0 V V mW mW/°C Emitter-Collector Breakdown Voltage Detector Power Dissipation @ TA = 25°C Derate above 25°C BVECO PD All All 6/1/00 200042A PHOTODARLINGTON OPTOCOUPLERS CNX48U H11B1 MOC8080 TIL113 ELECTRICAL CHARACTERISTICS (TA = 25°C Unless otherwise specified.) H11B2 H11B255 H11B3 INDIVIDUAL COMPONENT CHARACTERISTICS Parameter EMITTER (IF = 10 mA) Input Forward Voltage VF Test Conditions Symbol Device H11B1, H11B2 H11B255 MOC8080 TIL113 CNX48U MOC8080 H11B3 IR C All All CNX48U BVCEO TIL113 H11B1, H11B2 H11B3 H11B255 MOC8080 CNX48U, H11B1 Collector-Base Breakdown Voltage (IC = 100 µA, IF = 0) Emitter-Collector Breakdown Voltage Collector-Emitter Dark Current Note ** Typical values at TA = 25°C (IE = 100 µA, IB = 0) (VCE = 10 V, Base Open) BVECO ICEO (IC = 100 µA, IE = 0) BVCBO H11B2, H11B3 TIL113 H11B255 MOC8080 All All 55 7 100 10 1 100 V nA 30 100 V 25 55 60 70 V 30 0.9 0.7 1.2 1.3 1.05 1.35 0.001 50 60 1.3 1.7 1.4 1.5 10 µA pF 0.8 1.2 1.5 V Min Typ** Max Unit (IF = 10 mA) (IF = 10 mA, TA = -55°C) (IF = 10 mA, TA = 100°C) (IF = 50 mA) Reverse Leakage Current Capacitance DETECTOR (VR = 6 V) (VF = 0 V, f = 1.0 MHz) (IC = 1 mA, IF = 0) (IC = 100 µA, IF = 0) (IC = 10 mA, IF = 0) (IC = 100 µA, IF = 0) (IC = 1 mA, IF = 0) Collector-Emitter Breakdown Voltage 6/1/00 200042A PHOTODARLINGTON OPTOCOUPLERS CNX48U H11B1 MOC8080 TIL113 TRANSFER CHARACTERISTICS DC Characteristics (TA = 25°C Unless otherwise specified.) Symbol Device MOC8080 H11B255 CNX48U TIL113 IC (CTR) (IF = 1 mA, VCE = 5 V) (IF = 1 mA, VCE = 1 V) (IF = 0.5 mA, VCE = 1 V) (IF =1 mA, IC = 1 mA) Saturation Voltage (IF = 5 mA, IC = 10 mA) (IF = 50 mA, IC = 50 mA) (IF = 8 mA, IC = 2 mA) AC Characteristics (IC = 10 mA, VCE = 10 V) (RL = 100 ) (Fig.7) ton toff ton toff ton toff ton toff ton TIL113 toff ) MOC8080 CNX48U VCE(sat) H11B1 H11B2 H11B3 CNX48U H11B1, H11B2 H11B3, MOC8080 CNX48U H11B255 TIL113 H11B1 H11B2 H11B255 H11B3 H11B2 H11B255 H11B3 Test Conditions (IF = 10 mA, VCE = 5 V) (IF = 10 mA, VCE = 1 V) Min 50 (500) 10 (100) 60 (600) 30 (300) 5 (500) 2 (200) 1 (100) 5 (500) 1.75 (350) Typ** Max Units Collector Output Current(1) mA (%) 1.0 1.0 1.0 1.25 25 18 3.5 36 µs 70 190 3.5 25 0.35 55 5 100 V (IF = 10 mA, VCC = 5 V) (RE = 100 ), (RBE = 1M ) Switching Times (Fig. 8) (IF = 1 mA, VCC = 5 V) (RE = 1k ), (RBE = 10M ) (Fig. 8) (IF = 5 mA, VCC = 10 V) (RL = 100 ) (Fig.7) (IF = 200 mA, IC = 50 mA) (VCC = 10 V) (RL = 100 (Fig.7) ISOLATION CHARACTERISTICS Characteristic Input-Output Isolation Voltage(2) Isolation Resistance(2) Isolation Capacitance(2) Note ** Typical values at TA = 25°C (II-O Test Conditions 1 µA, Vrms, t = 1 min.) (VI-O = 500 VDC) (VI-O = , f = 1 MHz) RISO CISO Symbol Min 5300 1011 0.8 pf Typ** Max Units Vac(rms) 6/1/00 200042A PHOTODARLINGTON OPTOCOUPLERS CNX48U H11B1 MOC8080 TIL113 Fig. 1 Output Current vs. Input Current CTR - CURRENT TRANSFER RATIO (NORMALIZED) H11B2 H11B255 H11B3 Fig. 2 Current Transfer Ratio vs. Ambient Temperature CTR - CURRENT TRANSFER RATIO (NORMALIZED) 10 TA = 0˚C, 25˚C TA = 70˚C TA = 100˚C TA = -55˚C 1 1 NORMALIZED TO: CTR @ IF = 10 mA TA = 25˚C VCE = 5 V 0.1 0.1 1 10 100 NORMALIZED TO: CTR @ IF = 10 mA TA = 25˚C VCE = 10 V 0.1 -80 -60 -40 -20 0 20 40 60 80 100 120 IF - LED INPUT CURRENT (mA) TA - AMBIENT TEMPERATURE (˚C) Fig. 3 Collector Current vs. Collector-Emitter Voltage NORMALIZED TO: IF = 1 mA VCE = 5 V Fig. 4 Dark Current vs. Ambient Temperature ICEO - COLLECTOR-EMITTER DARK CURRENT (nA) 10000 VCE = 10 V 1000 16 IC - COLLECTOR CURRENT (NORMALIZED) 14 12 IF = 10 mA 10 IF = 5 mA 100 8 10 6 1 4 IF = 2 mA 2 0.1 IF = 1 mA 0 0 1 2 3 4 5 6 7 8 9 10 0.01 0 20 40 60 80 100 VCE- COLLECTOR -EMITTER VOLTAGE (V) TA - AMBIENT TEMPERATURE (˚C) Fig. 5 Turn-On Time vs. Input Current 1000 RL = 1 k VCC = 10 V 100 RL = 100 1000 Fig. 6 Turn-Off Time vs. Input Current TON - TIME (µs) 10 RL = 10 TOFF - TIME (µs) 100 RL = 1 k RL = 100 10 RL = 10 1 VCC = 10 V 1 0.1 0.1 1 10 100 0.1 1 10 100 IF - LED INPUT CURRENT (mA) IF - LED INPUT CURRENT (mA) 6/1/00 200042A PHOTODARLINGTON OPTOCOUPLERS CNX48U H11B1 MOC8080 TIL113 TYPICAL ELECTRO-OPTICAL CHARACTERISTIC CURVES (25°C Free air temperature unless otherwise specified) (Cont.) H11B2 H11B255 H11B3 VCC INPUT RL RIN INPUT PULSE OUTPUT OUTPUT 10% 1.5 V 90% 5V t on IF t off Test Circuit (All devices except CNX48U) Switching Waveforms (All devices except CNX48U) Fig. 7 Switching Time Test Circuit and Waveforms (All devices except CNX48U) VCC INPUT INPUT R BE 50 OUTPUT RE t on 90% 10% t off Test Circuit (CNX48U only) Switching Waveforms (CNX48U only) Fig. 8 Switching Time Test Circuit and Waveforms (CNX48U only) Notes 1. The current transfer ratio(IC/IF) is the ratio of the detector collector current to the LED input current with VCE @ 10 V. 2. For this test, LED pins 1 and 2 are common and phototransistor pins 4,5 and 6 are common. 6/1/00 200042A PHOTODARLINGTON OPTOCOUPLERS CNX48U H11B1 MOC8080 TIL113 Package Dimensions (Through Hole) PIN 1 ID. H11B2 H11B255 H11B3 Package Dimensions (Surface Mount) 0.350 (8.89) 0.330 (8.38) 3 0.270 (6.86) 0.240 (6.10) 2 1 PIN 1 ID. 0.270 (6.86) 0.240 (6.10) SEATING PLANE 0.350 (8.89) 0.330 (8.38) 0.070 (1.78) 0.045 (1.14) 4 5 6 0.070 (1.78) 0.045 (1.14) 0.300 (7.62) TYP 0.200 (5.08) 0.115 (2.92) 0.200 (5.08) 0.165 (4.18) 0.020 (0.51) MIN 0.016 (0.40) 0.008 (0.20) 0.022 (0.56) 0.016 (0.41) 0.300 (7.62) TYP 0.020 (0.51) MIN 0.100 (2.54) TYP 0.016 (0.41) 0.008 (0.20) 0.154 (3.90) 0.100 (2.54) 0.016 (0.40) MIN 0.315 (8.00) MIN 0.405 (10.30) MAX 0.022 (0.56) 0.016 (0.41) 0.100 (2.54) TYP 0° to 15° Lead Coplanarity : 0.004 (0.10) MAX Package Dimensions (0.4”Lead Spacing) Recommended Pad Layout for Surface Mount Leadform 0.270 (6.86) 0.240 (6.10) 0.070 (1.78) 0.060 (1.52) 0.350 (8.89) 0.330 (8.38) 0.070 (1.78) 0.045 (1.14) 0.415 (10.54) 0.100 (2.54) 0.030 (0.76) SEATING PLANE 0.295 (7.49) 0.200 (5.08) 0.115 (2.92) 0.154 (3.90) 0.100 (2.54) 0.004 (0.10) MIN 0.016 (0.40) 0.008 (0.20) 0.022 (0.56) 0.016 (0.41) 0.100 (2.54) TYP 0° to 15° 0.400 (10.16) TYP NOTE All dimensions are in inches (millimeters) Call QT Optoelectronics for more information or the phone number of your nearest distributor. United States 800-533-6786 • France 33 [0] 1.45.18.78.78 • Germany 49 [0] 89/96.30.51 • United Kingdom 44 [0] 1296 394499 • Asia/Pacific 603-7248193 www.qtopto.com 6/1/00 200042A PHOTODARLINGTON OPTOCOUPLERS CNX48U H11B1 MOC8080 TIL113 ORDERING INFORMATION Option S SD W 300 300W 3S 3SD H11B2 H11B255 H11B3 Order Entry Identifier .S .SD .W .300 .300W .3S .3SD Description Surface Mount Lead Bend Surface Mount; Tape and reel 0.4” Lead Spacing VDE 0884 VDE 0884, 0.4” Lead Spacing VDE 0884, Surface Mount VDE 0884, Surface Mount, Tape & Reel QT Carrier Tape Specifications (“D” Taping Orientation) 12.0 ± 0.1 4.85 ± 0.20 4.0 ± 0.1 0.30 ± 0.05 4.0 ± 0.1 Ø1.55 ± 0.05 1.75 ± 0.10 7.5 ± 0.1 13.2 ± 0.2 16.0 ± 0.3 9.55 ± 0.20 0.1 MAX 10.30 ± 0.20 Ø1.6 ± 0.1 User Direction of Feed NOTE All dimensions are millimeters Call QT Optoelectronics for more information or the phone number of your nearest distributor. United States 800-533-6786 • France 33 [0] 1.45.18.78.78 • Germany 49 [0] 89/96.30.51 • United Kingdom 44 [0] 1296 394499 • Asia/Pacific 603-7248193 www.qtopto.com 6/1/00 200042A