QBHP5050E-UV395BK

QBHP5050E-UVXXXK 4W High Power UV LED --------------------------------------------------------------------------------------------------------------------------------------- QT-Brightek High Power Series 4W High Power UV LED Part No.: QBHP5050E-UVXXXBK XXX: UV Wavelength B: 125o Viewing Angle K: Single chip Product: QBHP5050E-UVXXXBK Date: February 26, 2016 Version# 1.0 Page 1 of 9 QBHP5050E-UVXXXK 4W High Power UV LED --------------------------------------------------------------------------------------------------------------------------------------Table of Contents: Introduction ........................................................................................................................................... 3 Electrical / Optical Characteristic (Ta=25 oC) ........................................................................................ 4 Absolute Maximum Rating .................................................................................................................... 4 Characteristic Curves ............................................................................................................................ 5 IR Reflow Soldering Profile ................................................................................................................... 6 Packing ................................................................................................................................................. 7 Labeling ................................................................................................................................................ 8 Caution ................................................................................................................................................. 8 Ordering Information ............................................................................................................................. 8 Revision History .................................................................................................................................... 9 Disclaimer ............................................................................................................................................. 9 Product: QBHP5050E-UVXXXBK Date: February 26, 2016 Version# 1.0 Page 2 of 9 QBHP5050E-UVXXXK 4W High Power UV LED --------------------------------------------------------------------------------------------------------------------------------------- Introduction Feature:  4W High Power UV LED  Packed in tape and reel  ESD rating: 8KV (HBM)  Viewing Angle: 125° typ. Description: This 4W high power UV LED has compact size of 5.0 x 5.0mm. It is ideal for both indoor and outdoor lighting Application:  UV curing  UV marking  Purification  Inspection  Sterilization and Disinfection Certification & Compliance:  TS16949  ISO9001  RoHS Compliant tline Dimensions: Units: mm / tolerance = +/-0.2mm Product: QBHP5050E-UVXXXBK Date: February 26, 2016 Version# 1.0 Page 3 of 9 QBHP5050E-UVXXXK 4W High Power UV LED --------------------------------------------------------------------------------------------------------------------------------------- Electrical / Optical Characteristic (Ta=25 oC) Part Number Color IF (mA) QBHP5050E-UV385BK QBHP5050E-UV395BK UV UV 1500 1500 VF (V) λp (nm) Po (mW) Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. 3.4 3.7 4.6 380 385 390 2000 3000 4000 3.4 3.7 4.6 390 395 400 2000 3000 4000 Absolute Maximum Rating Material Pd (W) IF (mA) InGaN 7.5 2000 *Duty 1/10 @ 10ms Pulse Width IFP (mA)* 2500 VR (V) 5 TOP (oC) -40 to +80 TST (oC) -40 to +100 TSOL (oC) 260 Forward Voltage VF @ IF=1500mA Bin A1 A2 A3 Min. 3.4 3.8 4.2 Max. 3.8 4.2 5.6 Unit V Radiometric Power PO for UV385K & UV395K @ IF=1500mA Bin P30 P35 P40 P45 Min. 2500 3000 3500 4000 Max. 3000 3500 4000 4500 Unit mW Tolerance of measurement of forward voltage: ±0.1V Tolerance of measurement of Radiometric Power: ±15% Tolerance of measurement of Peak wavelength: ±2nm Product: QBHP5050E-UVXXXBK Date: February 26, 2016 Version# 1.0 Page 4 of 9 QBHP5050E-UVXXXK 4W High Power UV LED --------------------------------------------------------------------------------------------------------------------------------------- Characteristic Curves Product: QBHP5050E-UVXXXBK Date: February 26, 2016 Version# 1.0 Page 5 of 9 QBHP5050E-UVXXXK 4W High Power UV LED --------------------------------------------------------------------------------------------------------------------------------------- IR Reflow Soldering Profile Recommended Soldering Pad: Unit: mm Tolerance is ±0.13mm unless other specified. Product: QBHP5050E-UVXXXBK Date: February 26, 2016 Version# 1.0 Page 6 of 9 QBHP5050E-UVXXXK 4W High Power UV LED --------------------------------------------------------------------------------------------------------------------------------------- Packing Tape and Reel: Unit: mm Product: QBHP5050E-UVXXXBK Date: February 26, 2016 Version# 1.0 Page 7 of 9 QBHP5050E-UVXXXK 4W High Power UV LED --------------------------------------------------------------------------------------------------------------------------------------- Labeling Caution Ordering Information Part # Orderable Part # Spec Range Quantity per reel Po=3000mW typ. @ QBHP5050E-UV385BK QBHP5050E-UV395BK QBHP5050E-UV385BK IF=1500mA, λp=380nm to QBHP5050E-UV395BK Product: QBHP5050E-UVXXXBK 390nm Po=3000mW typ. @ IF=1500mA, λp=390nm to 400nm Date: February 26, 2016 Version# 1.0 500 units 500 units Page 8 of 9 QBHP5050E-UVXXXK 4W High Power UV LED --------------------------------------------------------------------------------------------------------------------------------------- Revision History Description: New Release of QBHP5050E-UVXXXBK Revision # V1.0 Revision Date 02/26/2016 Disclaimer QT-BRIGHTEK reserves the right to make changes without further notice to any products herein to improve reliability, function or design. QT-BRIGHTEK does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent rights, nor the rights of others. Life Support Policy QT-BRIGHTEK’s products are not authorized for use as critical components in life support devices or systems without the express written approval of QT-BRIGHTEK. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Product: QBHP5050E-UVXXXBK Date: February 26, 2016 Version# 1.0 Page 9 of 9