QBL912GC-IR2

QBL912GC-IR2 1.8mm Round Subminiature “Gull-Wing” Lead IR LEDs --------------------------------------------------------------------------------------------------------------------------------------- QT-Brightek 1.8mm Round Subminiature LED Series 1.8mm Round Subminiature “Gull-WIng” Lead IR LEDs Part No.: QBL912GC-IR2 Product: QBL912GC-IR2 Date: May 14, 2015 Version# 1.0 Page 1 of 9 QBL912GC-IR2 1.8mm Round Subminiature “Gull-Wing” Lead IR LEDs --------------------------------------------------------------------------------------------------------------------------------------Table of Contents: Introduction ........................................................................................................................................... 3 Electrical / Optical Characteristic (Ta=25 oC) ........................................................................................ 4 Absolute Maximum Rating .................................................................................................................... 4 Characteristic Curves ............................................................................................................................ 5 Solder Profile & Footprint ...................................................................................................................... 6 Packing ................................................................................................................................................. 7 Labeling ................................................................................................................................................ 8 Ordering Information ............................................................................................................................. 8 Revision History .................................................................................................................................... 9 Disclaimer ............................................................................................................................................. 9 Product: QBL912GC-IR2 Date: May 14, 2015 Version# 1.0 Page 2 of 9 QBL912GC-IR2 1.8mm Round Subminiature “Gull-Wing” Lead IR LEDs --------------------------------------------------------------------------------------------------------------------------------------- Introduction Feature:  Water clear lens  Package in tape and reel  AlGaAs technology  Viewing Angle = 20 deg Application:  Infrared Sensor  Optoelectronic Switch  Smoke detector  Drive sensor Description: Certification & Compliance:  TS16949  ISO9001  RoHS Compliant This 1.8mm round subminiature IR lamp with gull wing lead configuration are suitable for surface mount applications. Dimension: Units: mm / tolerance = +/-0.2mm Product: QBL912GC-IR2 Date: May 14, 2015 Version# 1.0 Page 3 of 9 QBL912GC-IR2 1.8mm Round Subminiature “Gull-Wing” Lead IR LEDs --------------------------------------------------------------------------------------------------------------------------------------- Electrical / Optical Characteristic (Ta=25 oC) Product Color QBL912GC-IR2 Infrared IF (mA) 20 VF (V) Typ. Max. 1.4 1.8 λP (nm) Min. Typ. Max. 870 880 890 Ie (mW/sr) Min. Typ. Max. 0.6 1.3 2.6 Absolute Maximum Rating VR (V) TOP (oC) TST (oC) TSOL (oC)** AlGaAs 90 50 1 *Duty cycle=1%, Pulse width 100us **IR Reflow for no more than 3 sec @ 260 oC 5 -40 ~ +80 -40 ~ +85 260 Product: QBL912GC-IR2 Date: May 14, 2015 Version# 1.0 Material Pd (mW) IF (mA) IFP (A)* Page 4 of 9 QBL912GC-IR2 1.8mm Round Subminiature “Gull-Wing” Lead IR LEDs --------------------------------------------------------------------------------------------------------------------------------------- Characteristic Curves Product: QBL912GC-IR2 Date: May 14, 2015 Version# 1.0 Page 5 of 9 QBL912GC-IR2 1.8mm Round Subminiature “Gull-Wing” Lead IR LEDs --------------------------------------------------------------------------------------------------------------------------------------- Solder Profile & Footprint -Recommended tin solder specifications: melting temperature in the range of 178~192 OC -The recommended reflow soldering profile is as follows (temperatures indicated are as measured on the surface of the LED resin): Recommended Pad Layout Units: mm Product: QBL912GC-IR2 Tolerance: ± 0.2mm Date: May 14, 2015 Version# 1.0 Page 6 of 9 QBL912GC-IR2 1.8mm Round Subminiature “Gull-Wing” Lead IR LEDs --------------------------------------------------------------------------------------------------------------------------------------- Packing Reel Dimension: Unit: mm Tape Dimension: Unit: mm Arrangement of Tape: Packaging Specification: Product: QBL912GC-IR2 Date: May 14, 2015 Version# 1.0 Page 7 of 9 QBL912GC-IR2 1.8mm Round Subminiature “Gull-Wing” Lead IR LEDs --------------------------------------------------------------------------------------------------------------------------------------- Labeling Ordering Information Part # Orderable Part # QBL912GC-IR2 QBL912GC-IR2 Product: QBL912GC-IR2 Spec Range Ie=1.3mW/sr typ. @ IF=20mA / λP=880nm typ. Date: May 14, 2015 Version# 1.0 Quantity per reel 1,000 units Page 8 of 9 QBL912GC-IR2 1.8mm Round Subminiature “Gull-Wing” Lead IR LEDs --------------------------------------------------------------------------------------------------------------------------------------- Revision History Description: New Release of QBL912GC-IR2 Revision # V1.0 Revision Date 05/14/2015 Disclaimer QT-BRIGHTEK reserves the right to make changes without further notice to any products herein to improve reliability, function or design. QT-BRIGHTEK does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent rights, nor the rights of others. Life Support Policy QT-BRIGHTEK’s products are not authorized for use as critical components in life support devices or systems without the express written approval of QT-BRIGHTEK. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Product: QBL912GC-IR2 Date: May 14, 2015 Version# 1.0 Page 9 of 9