QBL912ZC-IR2

1.8mm Round Subminiature “Z-Bend” Lead IR LEDs --------------------------------------------------------------------------------------------------------------------------------------QBL912ZC-IR2 QT-Brightek 1.8mm Round Subminiature LED Series 1.8mm Round Subminiature “Z-Bend” Lead IR LEDs Part No.: QBL912ZC-IR2 Product: QBL912ZC-IR2 Date: August 19, 2017 Version# 1.1 Page 1 of 9 1.8mm Round Subminiature “Z-Bend” Lead IR LEDs --------------------------------------------------------------------------------------------------------------------------------------Table of Contents: Introduction ........................................................................................................................................... 3 Electrical / Optical Characteristic (Ta=25 oC) ........................................................................................ 4 Absolute Maximum Rating .................................................................................................................... 4 Characteristic Curves ............................................................................................................................ 5 Solder Profile & Footprint ...................................................................................................................... 6 Packing ................................................................................................................................................. 7 Labeling ................................................................................................................................................ 8 Ordering Information ............................................................................................................................. 8 Revision History .................................................................................................................................... 9 Disclaimer ............................................................................................................................................. 9 QBL912ZC-IR2 Product: QBL912ZC-IR2 Date: August 19, 2017 Version# 1.1 Page 2 of 9 1.8mm Round Subminiature “Z-Bend” Lead IR LEDs --------------------------------------------------------------------------------------------------------------------------------------QBL912ZC-IR2 Introduction Feature:  Water clear lens  Package in tape and reel  AlGaAs technology  Viewing Angle = 20 deg  Reverse Mount Description: This 1.8mm round subminiature IR lamp with z-bend lead configuration are suitable for surface mount applications. Application:  Infrared Sensor  Optoelectronic Switch  Smoke detector  Drive sensor Certification & Compliance:  TS16949  ISO9001  RoHS Compliant Dimension: Units: mm / tolerance = +/-0.2mm Product: QBL912ZC-IR2 Date: August 19, 2017 Version# 1.1 Page 3 of 9 1.8mm Round Subminiature “Z-Bend” Lead IR LEDs --------------------------------------------------------------------------------------------------------------------------------------QBL912ZC-IR2 Electrical / Optical Characteristic (Ta=25 oC) Product Color IF (mA) QBL912ZC-IR2 Infrared 20 VF (V) Typ. Max. 1.4 1.8 λP (nm) Min. Typ. Max. 870 880 890 Ie (mW/sr) Min. Typ. Max. 0.6 1.3 2.6 Absolute Maximum Rating VR (V) TOP (oC) TST (oC) TSOL (oC)** AlGaAs 90 50 1 *Duty cycle=1%, Pulse width 100us **IR Reflow for no more than 3 sec @ 260 oC 5 -40 ~ +80 -40 ~ +85 260 Product: QBL912ZC-IR2 Date: August 19, 2017 Version# 1.1 Material Pd (mW) IF (mA) IFP (A)* Page 4 of 9 1.8mm Round Subminiature “Z-Bend” Lead IR LEDs --------------------------------------------------------------------------------------------------------------------------------------QBL912ZC-IR2 Characteristic Curves Product: QBL912ZC-IR2 Date: August 19, 2017 Version# 1.1 Page 5 of 9 1.8mm Round Subminiature “Z-Bend” Lead IR LEDs --------------------------------------------------------------------------------------------------------------------------------------QBL912ZC-IR2 Solder Profile & Footprint -Recommended tin solder specifications: melting temperature in the range of 178~192 OC -The recommended reflow soldering profile is as follows (temperatures indicated are as measured on the surface of the LED resin): Recommended Pad Layout Units: mm Product: QBL912ZC-IR2 Tolerance: ± 0.2mm Date: August 19, 2017 Version# 1.1 Page 6 of 9 1.8mm Round Subminiature “Z-Bend” Lead IR LEDs --------------------------------------------------------------------------------------------------------------------------------------QBL912ZC-IR2 Packing Reel Dimension: Unit: mm Tape Dimension: Unit: mm Arrangement of Tape: Packaging Specification: Product: QBL912ZC-IR2 Date: August 19, 2017 Version# 1.1 Page 7 of 9 1.8mm Round Subminiature “Z-Bend” Lead IR LEDs --------------------------------------------------------------------------------------------------------------------------------------QBL912ZC-IR2 Labeling Ordering Information Part # Orderable Part # QBL912ZC-IR2 QBL912ZC-IR2 Product: QBL912ZC-IR2 Spec Range Ie=1.3mW/sr typ. @ IF=20mA / λP=880nm typ. Date: August 19, 2017 Version# 1.1 Quantity per reel 800 units Page 8 of 9 1.8mm Round Subminiature “Z-Bend” Lead IR LEDs --------------------------------------------------------------------------------------------------------------------------------------QBL912ZC-IR2 Revision History Description: New Release of QBL912ZC-IR2 Update packing spec to 800pcs/reel Revision # V1.0 V1.1 Revision Date 05/14/2015 08/19/2017 Disclaimer QT-BRIGHTEK reserves the right to make changes without further notice to any products herein to improve reliability, function or design. QT-BRIGHTEK does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent rights, nor the rights of others. Life Support Policy QT-BRIGHTEK’s products are not authorized for use as critical components in life support devices or systems without the express written approval of QT-BRIGHTEK. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Product: QBL912ZC-IR2 Date: August 19, 2017 Version# 1.1 Page 9 of 9