QBL912ZC-IR3

QBL912ZC-IR3 1.8mm Round Subminiature “Z-Bend” Lead IR LED --------------------------------------------------------------------------------------------------------------------------------------- QT-Brightek 1.8mm Round Subminiature LED Series 1.8mm Round Subminiature “Z-Bend” Lead IR LEDs Part No.: QBL912ZC-IR3 IR3: 850nm Product: QBL912ZC-IR3 Date: June 11, 2021 Version# 1.1 Page 1 of 9 QBL912ZC-IR3 1.8mm Round Subminiature “Z-Bend” Lead IR LED --------------------------------------------------------------------------------------------------------------------------------------Table of Contents: Introduction ........................................................................................................................................... 3 Electrical / Optical Characteristic (Ta=25 oC) ........................................................................................ 4 Absolute Maximum Rating .................................................................................................................... 4 Characteristic Curves ............................................................................................................................ 5 Solder Profile & Footprint ...................................................................................................................... 6 Packing ................................................................................................................................................. 7 Labeling ................................................................................................................................................ 8 Ordering Information ............................................................................................................................. 8 Revision History .................................................................................................................................... 9 Disclaimer ............................................................................................................................................. 9 Product: QBL912ZC-IR3 Date: June 11, 2021 Version# 1.1 Page 2 of 9 QBL912ZC-IR3 1.8mm Round Subminiature “Z-Bend” Lead IR LED --------------------------------------------------------------------------------------------------------------------------------------- Introduction Feature:  Water clear lens  Package in tape and reel  AlGaAs technology  Viewing Angle = 20 deg  Reverse Mount Description: This 1.8mm round subminiature IR lamp with z-bend lead configuration is suitable for surface mount applications. Application:  Infrared Sensor  Optoelectronic Switch  Smoke detector  Drive sensor Certification & Compliance:  TS16949  ISO9001  RoHS Compliant Dimension: Units: mm / tolerance = +/-0.2mm Product: QBL912ZC-IR3 Date: June 11, 2021 Version# 1.1 Page 3 of 9 QBL912ZC-IR3 1.8mm Round Subminiature “Z-Bend” Lead IR LED --------------------------------------------------------------------------------------------------------------------------------------- Electrical / Optical Characteristic (Ta=25 oC) Product Color IF (mA) QBL912ZC-IR3 Infrared 100 VF (V) Typ. Max. 1.5 1.8 λP (nm) Min. Typ. Max. 835 850 860 Ie (mW/sr) Min. Typ. Max. 19 22 24.3 Absolute Maximum Rating VR (V) TOP (oC) TST (oC) TSOL (oC)** AlGaAs 180 100 1 *Duty cycle=1%, Pulse width 100us **IR Reflow for no more than 3 sec @ 260 oC 5 -40 ~ +80 -40 ~ +85 260 Product: QBL912ZC-IR3 Date: June 11, 2021 Version# 1.1 Material Pd (mW) IF (mA) IFP (A)* Page 4 of 9 QBL912ZC-IR3 1.8mm Round Subminiature “Z-Bend” Lead IR LED --------------------------------------------------------------------------------------------------------------------------------------- Characteristic Curves Product: QBL912ZC-IR3 Date: June 11, 2021 Version# 1.1 Page 5 of 9 QBL912ZC-IR3 1.8mm Round Subminiature “Z-Bend” Lead IR LED --------------------------------------------------------------------------------------------------------------------------------------- Solder Profile & Footprint -Recommended tin solder specifications: melting temperature in the range of 178~192 OC -The recommended reflow soldering profile is as follows (temperatures indicated are as measured on the surface of the LED resin): Recommended Pad Layout Units: mm Product: QBL912ZC-IR3 Tolerance:±0.2mm Date: June 11, 2021 Version# 1.1 Page 6 of 9 QBL912ZC-IR3 1.8mm Round Subminiature “Z-Bend” Lead IR LED --------------------------------------------------------------------------------------------------------------------------------------- Packing Reel Dimension: Unit: mm Tape Dimension: Unit: mm Arrangement of Tape: Packaging Specification: Product: QBL912ZC-IR3 Date: June 11, 2021 Version# 1.1 Page 7 of 9 QBL912ZC-IR3 1.8mm Round Subminiature “Z-Bend” Lead IR LED --------------------------------------------------------------------------------------------------------------------------------------- Labeling Ordering Information Part # Orderable Part # QBL912ZC-IR3 QBL912ZC-IR3 Product: QBL912ZC-IR3 Spec Range Ie=22mW/sr typ. @ IF=100mA / λP=850nm typ. Date: June 11, 2021 Version# 1.1 Quantity per reel 1,000 units Page 8 of 9 QBL912ZC-IR3 1.8mm Round Subminiature “Z-Bend” Lead IR LED --------------------------------------------------------------------------------------------------------------------------------------- Revision History Description: New Release of QBL912ZC-IR3 Update wavelength Min. value to 835nm / update logo Revision # V1.0 V1.1 Revision Date 05/14/2015 06/11/2021 Disclaimer QT-BRIGHTEK reserves the right to make changes without further notice to any products herein to improve reliability, function or design. QT-BRIGHTEK does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent rights, nor the rights of others. Life Support Policy QT-BRIGHTEK’s products are not authorized for use as critical components in life support devices or systems without the express written approval of QT-BRIGHTEK. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Product: QBL912ZC-IR3 Date: June 11, 2021 Version# 1.1 Page 9 of 9