QBLP615-IW-CW

QBLP615-IW-XX 1206 Side View LED ------------------------------------------------------------------------------------------------------------------------------------------ QT-Brightek Chip LED Series SMD 1206 Side View LED Part No.: QBLP615-IW-XX XX=CW Product: QBLP615-IW-XX Date: September 29, 2022 Version# 1.1 Page 1 of 11 QBLP615-IW-XX 1206 Side View LED -----------------------------------------------------------------------------------------------------------------------------------------Table of Contents: Introduction ........................................................................................................................................... 3 Electrical / Optical Characteristic (Ta=25 oC) ........................................................................................ 4 Absolute Maximum Rating .................................................................................................................... 4 CIE Chromaticity Diagram..................................................................................................................... 5 Characteristic Curves ............................................................................................................................ 6 Solder Profile & Footprint ...................................................................................................................... 7 Packing ................................................................................................................................................. 9 Labeling .............................................................................................................................................. 10 Ordering Information ........................................................................................................................... 10 Revision History .................................................................................................................................. 11 Disclaimer ........................................................................................................................................... 11 Product: QBLP615-IW-XX Date: September 29, 2022 Version# 1.1 Page 2 of 11 QBLP615-IW-XX 1206 Side View LED ------------------------------------------------------------------------------------------------------------------------------------------ Introduction Feature:  Yellow diffused lens  Package in tape and reel  Ultra bright 1206 side view LED package  InGaN technology  Viewing angle 150° typ. Application:  Status indication  Back lighting application Certification & Compliance:  TS16949  ISO9001  RoHS Compliant Description: These ultra bright 1206 side view LEDs have a height profile of 1.00mm. Combination of high brightness output and small footprint, these LEDs are ideal for keypad backlighting and status indication. Dimension: Units: mm / tolerance = +/-0.1mm Product: QBLP615-IW-XX Date: September 29, 2022 Version# 1.1 Page 3 of 11 QBLP615-IW-XX 1206 Side View LED ------------------------------------------------------------------------------------------------------------------------------------------ Electrical / Optical Characteristic (Ta=25 oC) Product Color QBLP615-IW-CW Cool White IF (mA) 20 VF (V) Typ. Max. 3.1 CCT Coordinate Min. Typ. Max. 3.7 - X=0.28 Y=0.29 - IV (mcd) Min. Typ. 200 280 Absolute Maximum Rating Material Pd (mW) IF (mA) IFP (mA)* InGaN 111 30 125 *Duty 1/8 @ 1KHz **IR Reflow for no more than 10 sec @ 260 oC VR (V) 5 TOP (oC) -40 ~ +80 TST (oC) -40 ~ +85 TSOL (oC)** 260 Forward Voltage VF @ IF=20mA Bin f g h Min. 2.8 3.1 3.4 Max. 3.1 3.4 3.7 Unit Max. 250 320 400 500 Unit V Luminous Intensity IV @ IF=20mA Bin 2 3 4 5 Min. 200 250 320 400 Product: QBLP615-IW-XX mcd Date: September 29, 2022 Version# 1.1 Page 4 of 11 QBLP615-IW-XX 1206 Side View LED ------------------------------------------------------------------------------------------------------------------------------------------ CIE Chromaticity Diagram Product: QBLP615-IW-XX Date: September 29, 2022 Version# 1.1 Page 5 of 11 QBLP615-IW-XX 1206 Side View LED ------------------------------------------------------------------------------------------------------------------------------------------ Characteristic Curves Product: QBLP615-IW-XX Date: September 29, 2022 Version# 1.1 Page 6 of 11 QBLP615-IW-XX 1206 Side View LED ------------------------------------------------------------------------------------------------------------------------------------------ Solder Profile & Footprint -Recommended tin solder specifications: melting temperature in the range of 178~192 OC -The recommended reflow soldering profile is as follows (temperatures indicated are as measured on the surface of the LED resin): Recommended Pad Layout Units: mm Product: QBLP615-IW-XX Date: September 29, 2022 Version# 1.1 Page 7 of 11 QBLP615-IW-XX 1206 Side View LED ------------------------------------------------------------------------------------------------------------------------------------------ The recommended IR reflow direction for a right angle (side view) SMD led is illustrated below to insure the solder on each lead melts simultaneously during the SMT reflow soldering process. Mounting the LED on PCB Note: The amount of solder paste applied as shown in the picture is just for illustration purpose only. When mounting and soldering the LEDs, avoid excess solder paste from overflowing onto or near the epoxy lens. Product: QBLP615-IW-XX Date: September 29, 2022 Version# 1.1 Page 8 of 11 QBLP615-IW-XX 1206 Side View LED ------------------------------------------------------------------------------------------------------------------------------------------ Packing Reel Dimension: Unit: mm Tape Dimension: Unit in mm Arrangement of Tape: Drier Packaging Specifications: Drier Product: QBLP615-IW-XX Date: September 29, 2022 Version# 1.1 Page 9 of 11 QBLP615-IW-XX 1206 Side View LED ------------------------------------------------------------------------------------------------------------------------------------------ Labeling Ordering Information Part # Orderable Part # QBLP615-IW-CW QBLP615-IW-CW Product: QBLP615-IW-XX Spec Range Iv=280mcd typ. @ IF=20mA / CCT Coordinate: (X=0.28, Y=0.29) typ. Quantity per reel 3,000 units Date: September 29, 2022 Version# 1.1 Page 10 of 11 QBLP615-IW-XX 1206 Side View LED ------------------------------------------------------------------------------------------------------------------------------------------ Revision History Description: New Release of QBLP615-IW-XX Add recommended SMT and mounting suggestion / Optimize drawing dimensions in the datasheet Revision # V1.0 Revision Date 03/27/2014 V1.1 09/29/2022 Disclaimer QT-BRIGHTEK reserves the right to make changes without further notice to any products herein to improve reliability, function or design. QT-BRIGHTEK does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent rights, nor the rights of others. Life Support Policy QT-BRIGHTEK’s products are not authorized for use as critical components in life support devices or systems without the express written approval of QT-BRIGHTEK. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Product: QBLP615-IW-XX Date: September 29, 2022 Version# 1.1 Page 11 of 11