QBLP631-YG

QBLP631-YG 0805 LED --------------------------------------------------------------------------------------------------------------------------------------- QT-Brightek Chip LED Series SMD 0805 LED Part No.: QBLP631-YG Product: QBLP631-YG Date: September 16, 2014 Version# 1.0 Page 1 of 10 QBLP631-YG 0805 LED --------------------------------------------------------------------------------------------------------------------------------------- Table of Contents: Introduction ........................................................................................................................................... 3 Electrical / Optical Characteristic (Ta=25 oC) ........................................................................................ 4 Absolute Maximum Rating .................................................................................................................... 4 Characteristic Curves ............................................................................................................................ 5 Solder Profile & Footprint ...................................................................................................................... 6 Packing ................................................................................................................................................. 7 Labeling ................................................................................................................................................ 8 Ordering Information ............................................................................................................................. 9 Revision History .................................................................................................................................. 10 Disclaimer ........................................................................................................................................... 10 Product: QBLP631-YG Date: September 16, 2014 Version# 1.0 Page 2 of 10 QBLP631-YG 0805 LED --------------------------------------------------------------------------------------------------------------------------------------- Introduction Feature:  Water clear lens (except white color)  Package in tape and reel  Bright 0805 LED package  GaP Technology Description: Application:  Status indication  Back lighting application Certification & Compliance:  TS16949  ISO9001  RoHS Compliant These ultra bright 0805 LEDs have a height profile of 0.8mm. Combination of high brightness output and small footprint, these LEDs are ideal for keypad backlighting and status indication. Dimension: Units: mm / tolerance = +/-0.1mm Product: QBLP631-YG Date: September 16, 2014 Version# 1.0 Page 3 of 10 QBLP631-YG 0805 LED --------------------------------------------------------------------------------------------------------------------------------------- Electrical / Optical Characteristic (Ta=25 oC) Product Color IF (mA) QBLP631-YG Yellow Green 20 VF (V) Typ. Max. 2.0 2.5 Min. 565 λD (nm) Typ. 570 Max. 576 IV (mcd) Min. Typ. 5.0 15 Absolute Maximum Rating Material Pd (mW) IF (mA) IFP (mA)* VR (V) TOP (oC) TST (oC) TSOL (oC)** 5 -40 ~ +80 -40 ~ +85 260 GaP 75 30 125 *Duty 1/8 @ 1KHz **IR Reflow for no more than 10 sec @ 260 oC Forward Voltage VF for GaP @ IF=20mA Bin □ Min. 1.7 Max. 2.5 Unit Max. 8.0 12.5 16 20 25 Unit V Luminous Intensity IV @ IF=20mA Bin 8 9 A B C Min. 5.0 8.0 12.5 16 20 mcd Dominant Wavelength λD for Yellow Green @ IF=20mA Bin h i j Product: QBLP631-YG Min. 565 568 572 Max. 568 572 576 Unit nm Date: September 16, 2014 Version# 1.0 Page 4 of 10 QBLP631-YG 0805 LED --------------------------------------------------------------------------------------------------------------------------------------- Characteristic Curves Product: QBLP631-YG Date: September 16, 2014 Version# 1.0 Page 5 of 10 QBLP631-YG 0805 LED --------------------------------------------------------------------------------------------------------------------------------------- Solder Profile & Footprint -Recommended tin solder specifications: melting temperature in the range of 178~192 OC -The recommended reflow soldering profile is as follows (temperatures indicated are as measured on the surface of the LED resin): Recommended Pad Layout Units: mm Product: QBLP631-YG Tolerance: ± 0.1mm Date: September 16, 2014 Version# 1.0 Page 6 of 10 QBLP631-YG 0805 LED --------------------------------------------------------------------------------------------------------------------------------------- Packing Reel Dimension: (Unit: mm) Tape Dimension: SEC.A-A 2.00 [0.08"] 0.20 [0.01"] 1.10 [0.04"] 8.00 [0.31"] A 5.25 [0.21"] 4.00 [0.16"] 1.75 [0.07"] 1.05 [0.04"] 4.00 [0.16"] A (Unit: mm) Arrangement of Tape: Product: QBLP631-YG Date: September 16, 2014 Version# 1.0 Page 7 of 10 Drier QBLP631-YG 0805 LED --------------------------------------------------------------------------------------------------------------------------------------Packaging Specifications: Drier Labeling Product: QBLP631-YG Date: September 16, 2014 Version# 1.0 Page 8 of 10 QBLP631-YG 0805 LED --------------------------------------------------------------------------------------------------------------------------------------- Ordering Information Part # Orderable Part # QBLP631-YG QBLP631-YG Product: QBLP631-YG Spec Range Iv=15mcd typ. @ IF=20mA, λD =565nm to 576nm Date: September 16, 2014 Version# 1.0 Quantity per reel 3,000 units Page 9 of 10 QBLP631-YG 0805 LED --------------------------------------------------------------------------------------------------------------------------------------- Revision History Description: New Release of QBLP631-YG Revision # V1.0 Revision Date 09/16/2014 Disclaimer QT-BRIGHTEK reserves the right to make changes without further notice to any products herein to improve reliability, function or design. QT-BRIGHTEK does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent rights, nor the rights of others. Life Support Policy QT-BRIGHTEK’s products are not authorized for use as critical components in life support devices or systems without the express written approval of QT-BRIGHTEK. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Product: QBLP631-YG Date: September 16, 2014 Version# 1.0 Page 10 of 10