QBLP651-IR1

QBLP651-IR1 1206 LED with Inner Lens --------------------------------------------------------------------------------------------------------------------------------------- QT-Brightek Chip LED Series 1206 (with Inner Lens) IR LED Part No.: QBLP650-IR1 Product: QBLP651-IR1 Date: May 11, 2015 Version# 1.0 Page 1 of 9 QBLP651-IR1 1206 LED with Inner Lens --------------------------------------------------------------------------------------------------------------------------------------Table of Contents: Introduction ........................................................................................................................................... 3 Electrical / Optical Characteristic (Ta=25 oC) ........................................................................................ 4 Absolute Maximum Rating .................................................................................................................... 4 Characteristic Curves ............................................................................................................................ 5 Solder Profile & Footprint ...................................................................................................................... 6 Packing ................................................................................................................................................. 7 Labeling ................................................................................................................................................ 8 Ordering Information ............................................................................................................................. 8 Revision History .................................................................................................................................... 9 Disclaimer ............................................................................................................................................. 9 Product: QBLP651-IR1 Date: May 11, 2015 Version# 1.0 Page 2 of 9 QBLP651-IR1 1206 LED with Inner Lens --------------------------------------------------------------------------------------------------------------------------------------- Introduction Feature:  Water clear lens  Package in tape and reel  1206 Package with Inner Lens  AlGaAs technology  Viewing Angle = 40 deg Description: These top mount bright 1206 LEDs have a height profile of 1.4mm, which is ideal in any kind of back lighting application. Also, it is a light weight model that is good for miniature products. Application:  Infrared Sensor  Optoelectronic Switch  Smoke detector  Drive sensor Certification & Compliance:  TS16949  ISO9001  RoHS Compliant Dimension: Units: mm / tolerance = +/-0.1mm Product: QBLP651-IR1 Date: May 11, 2015 Version# 1.0 Page 3 of 9 QBLP651-IR1 1206 LED with Inner Lens --------------------------------------------------------------------------------------------------------------------------------------- Electrical / Optical Characteristic (Ta=25 oC) Product Color IF (mA) QBLP651-IR1 Infrared 20 VF (V) Typ. Max. 1.3 1.8 λP (nm) Min. Typ. Max. 940 - Ie (mW/sr) Min. Typ. Max. 0.6 1.6 - Absolute Maximum Rating VR (V) TOP (oC) TST (oC) TSOL (oC)** AlGaAs 90 50 1 *Duty cycle=1%, Pulse width 100us **IR Reflow for no more than 10 sec @ 260 oC 5 -40 ~ +80 -40 ~ +85 260 Product: QBLP651-IR1 Date: May 11, 2015 Version# 1.0 Material Pd (mW) IF (mA) IFP (A)* Page 4 of 9 QBLP651-IR1 1206 LED with Inner Lens --------------------------------------------------------------------------------------------------------------------------------------- Characteristic Curves Product: QBLP651-IR1 Date: May 11, 2015 Version# 1.0 Page 5 of 9 QBLP651-IR1 1206 LED with Inner Lens --------------------------------------------------------------------------------------------------------------------------------------- Solder Profile & Footprint -Recommended tin solder specifications: melting temperature in the range of 178~192 OC -The recommended reflow soldering profile is as follows (temperatures indicated are as measured on the surface of the LED resin): Recommended Pad Layout Units: mm Product: QBLP651-IR1 Tolerance: ± 0.1mm Date: May 11, 2015 Version# 1.0 Page 6 of 9 QBLP651-IR1 1206 LED with Inner Lens --------------------------------------------------------------------------------------------------------------------------------------- Packing Reel Dimension: Unit: mm Tape Dimension: A SEC.A-A A Unit: mm Arrangement of Tape: Packaging Specification: Product: QBLP651-IR1 Date: May 11, 2015 Version# 1.0 Page 7 of 9 QBLP651-IR1 1206 LED with Inner Lens --------------------------------------------------------------------------------------------------------------------------------------- Labeling Ordering Information Part # Orderable Part # QBLP651-IR1 QBLP651-IR1 Product: QBLP651-IR1 Spec Range Ie=1.6mW/sr typ. / λP=940nm typ. @ IF=20mA Date: May 11, 2015 Version# 1.0 Quantity per reel 3,000 units Page 8 of 9 QBLP651-IR1 1206 LED with Inner Lens --------------------------------------------------------------------------------------------------------------------------------------- Revision History Description: New Release of QBLP651-IR1 Revision # V1.0 Revision Date 05/11/2015 Disclaimer QT-BRIGHTEK reserves the right to make changes without further notice to any products herein to improve reliability, function or design. QT-BRIGHTEK does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent rights, nor the rights of others. Life Support Policy QT-BRIGHTEK’s products are not authorized for use as critical components in life support devices or systems without the express written approval of QT-BRIGHTEK. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Product: QBLP651-IR1 Date: May 11, 2015 Version# 1.0 Page 9 of 9