QBLP651-S1

QBLP651-S1 1206 LED with Inner Lens --------------------------------------------------------------------------------------------------------------------------------------- QT-Brightek Chip LED Series 1206 Chip LED with Inner Lens Part No.: QBLP651-S1 Product: QBLP651-S1 Date: September 18, 2014 Version# 1.0 Page 1 of 9 QBLP651-S1 1206 LED with Inner Lens --------------------------------------------------------------------------------------------------------------------------------------Table of Contents: Introduction ........................................................................................................................................... 3 Electrical / Optical Characteristic (Ta=25 oC) ........................................................................................ 4 Absolute Maximum Rating .................................................................................................................... 4 Characteristic Curves ............................................................................................................................ 5 Solder Profile ........................................................................................................................................ 6 Labeling ................................................................................................................................................ 8 Ordering Information ............................................................................................................................. 8 Revision History .................................................................................................................................... 9 Disclaimer ............................................................................................................................................. 9 Product: QBLP651-S1 Date: September 18, 2014 Version# 1.0 Page 2 of 9 QBLP651-S1 1206 LED with Inner Lens --------------------------------------------------------------------------------------------------------------------------------------- Introduction Feature:  Water clear lens  Tape and reel packaging  Bright LED package  AlGaAs technology  40° Viewing Angle) Description: These 1206 LEDs have a height profile of 1.40mm. With a combination of high brightness output and a small footprint, these LEDs are ideal for status indication. Application:  Status indication  Back lighting application Certification & Compliance:  TS16949  ISO9001  RoHS Compliant Dimension: Units: mm / tolerance = +/-0.1mm Product: QBLP651-S1 Date: September 18, 2014 Version# 1.0 Page 3 of 9 QBLP651-S1 1206 LED with Inner Lens --------------------------------------------------------------------------------------------------------------------------------------- Electrical / Optical Characteristic (Ta=25 oC) Product Number Color IF (mA) QBLP651-S1 Deep Red 20 VF (V) λD (nm) Iv (mcd) Typ. Max. Min. Typ. Max. Min. Typ. 2.0 2.5 630 640 650 20 40 Min. 1.7 Absolute Maximum Rating Material Pd (mW) IF (mA) IFP (mA)* AlGaAs 75 30 125 *Duty 1/8 @ 1KHz **IR Reflow for no more than 10 sec @ 260 oC VR (V) 5 TOP (oC) -40 to +80 TST (oC) -40 to +85 TSOL (oC)** 260 Forward Voltage VF @ IF=20mA Bin □ Min. 1.7 Max. 2.5 Unit Max. 25 32 40 50 63 Unit V Luminous Intensity IV @ IF=20mA Bin C D E F G Min. 20 25 32 40 50 mcd Dominant Wavelength λD @ IF=20mA Bin v w Product: QBLP651-S1 Min. 630 635 Max. 635 650 Unit nm Date: September 18, 2014 Version# 1.0 Page 4 of 9 QBLP651-S1 1206 LED with Inner Lens --------------------------------------------------------------------------------------------------------------------------------------- Characteristic Curves Product: QBLP651-S1 Date: September 18, 2014 Version# 1.0 Page 5 of 9 QBLP651-S1 1206 LED with Inner Lens --------------------------------------------------------------------------------------------------------------------------------------- Solder Profile -Recommended tin solder specifications: melting temperature in the range of 178~192 OC -The recommended reflow soldering profile is as follows (temperatures indicated are as measured on the surface of the LED resin): Recommended Pad Layout Units: mm Product: QBLP651-S1 Tolerance: ± 0.1mm Date: September 18, 2014 Version# 1.0 Page 6 of 9 QBLP651-S1 1206 LED with Inner Lens --------------------------------------------------------------------------------------------------------------------------------------- Packing Reel Dimensions: Unit: mm Tape Dimensions: Unit: mm Arrangement of Tape: Packing specifications: Product: QBLP651-S1 Date: September 18, 2014 Version# 1.0 Page 7 of 9 QBLP651-S1 1206 LED with Inner Lens --------------------------------------------------------------------------------------------------------------------------------------- Labeling Ordering Information Part # Orderable Part # QBLP651-S1 QBLP651-S1 Product: QBLP651-S1 Spec Range IV=40mcd typ. @ IF=20mA, λD=630 to 650nm Date: September 18, 2014 Version# 1.0 Quantity per reel 3,000 pcs Page 8 of 9 QBLP651-S1 1206 LED with Inner Lens --------------------------------------------------------------------------------------------------------------------------------------- Revision History Description: New Release of QBLP651-S1 Revision # V1.0 Revision Date 09/18/2014 Disclaimer QT-BRIGHTEK reserves the right to make changes without further notice to any products herein to improve reliability, function or design. QT-BRIGHTEK does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent rights, nor the rights of others. Life Support Policy QT-BRIGHTEK’s products are not authorized for use as critical components in life support devices or systems without the express written approval of QT-BRIGHTEK. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Product: QBLP651-S1 Date: September 18, 2014 Version# 1.0 Page 9 of 9