QBLP653-SAG

QBLP653-SAG 1208 Bi-Color LED --------------------------------------------------------------------------------------------------------------------------------------- QT-Brightek Chip LED Series SMD 1208 Bi-Color LED Part No.: QBLP653-SAG Product: QBLP653-SAG Date: September 16, 2016 Version# 1.2 Page 1 of 9 QBLP653-SAG 1208 Bi-Color LED --------------------------------------------------------------------------------------------------------------------------------------Table of Contents: Introduction ........................................................................................................................................... 3 Electrical / Optical Characteristic (T=25 oC) .......................................................................................... 4 Absolute Maximum Rating .................................................................................................................... 4 Characteristic Curves ............................................................................................................................ 5 Solder Profile & Footprint ...................................................................................................................... 6 Packing ................................................................................................................................................. 7 Labeling ................................................................................................................................................ 8 Ordering Information ............................................................................................................................. 8 Revision History .................................................................................................................................... 9 Disclaimer ............................................................................................................................................. 9 Product: QBLP653-SAG Date: September 16, 2016 Version# 1.2 Page 2 of 9 QBLP653-SAG 1208 Bi-Color LED --------------------------------------------------------------------------------------------------------------------------------------- Introduction Feature:  Water clear lens  Package in tap and reel  Bright 1208 LED package  AllnGaP technology  S: Deep Red / AG: Yellow Green  60° Viewing Angle Application:  Status indication  Back lighting application Certification & Compliance:  TS16949  ISO9001  RoHS Compliant Description: These 1208 bi-color LEDs have a height profile of 2.5mm. With narrow viewing angle, LED produces high bright light output. Dimension: Units: mm / tolerance = +/-0.1mm Product: QBLP653-SAG Date: September 16, 2016 Version# 1.2 Page 3 of 9 QBLP653-SAG 1208 Bi-Color LED --------------------------------------------------------------------------------------------------------------------------------------- Electrical / Optical Characteristic (T=25 oC) Product Color IF(mA) QBLP653-SAG Deep Red Yellow Green 20 20 VF(V) Typ. Max. 2.0 2.5 2.0 2.5 Min. 630 565 λD (nm) Typ. 640 570 Max. 650 575 IV(mcd) Min. Typ. 40 30 - Absolute Maximum Rating Material Pd (mW) IF (mA) IFP (mA)* AlInGaP 75 30 125 *Duty 1/8 @ 1kHz ** IR Reflow for no more than 10 sec @ 260 oC Product: QBLP653-SAG VR (V) 5 TOP (oC) -40 ~ +80 TST (oC)** 40 ~ +85 Date: September 16, 2016 Version# 1.2 TSOL (oC)** 260 Page 4 of 9 QBLP653-SAG 1208 Bi-Color LED --------------------------------------------------------------------------------------------------------------------------------------- Characteristic Curves Product: QBLP653-SAG Date: September 16, 2016 Version# 1.2 Page 5 of 9 QBLP653-SAG 1208 Bi-Color LED --------------------------------------------------------------------------------------------------------------------------------------- Solder Profile & Footprint -Recommended tin solder specifications: melting temperature in the range of 178~192 OC -The recommended reflow soldering profile is as follows (temperatures indicated are as measured on the surface of the LED resin): Recommend Pad Layout Units: mm Product: QBLP653-SAG tolerance: +/- 0.1mm Date: September 16, 2016 Version# 1.2 Page 6 of 9 QBLP653-SAG 1208 Bi-Color LED --------------------------------------------------------------------------------------------------------------------------------------- Packing Reel Dimension: Unit: mm Tape Dimension: Unit: mm Packaging Specification: Product: QBLP653-SAG Date: September 16, 2016 Version# 1.2 Page 7 of 9 QBLP653-SAG 1208 Bi-Color LED --------------------------------------------------------------------------------------------------------------------------------------- Labeling Ordering Information Part # Orderable Part # QBLP653-SAG QBLP653-SAG Product: QBLP653-SAG Spec Range Deep Red: Iv=40mcd min., λD: 630nm to 650nm @ IF=20mA Yellow Green: Iv=30mcd min., λD: 565nm to 575nm @ IF=20mA Date: September 16, 2016 Version# 1.2 Quantity per reel 1,500 units Page 8 of 9 QBLP653-SAG 1208 Bi-Color LED --------------------------------------------------------------------------------------------------------------------------------------- Revision History Description: New Release of QBLP653-SAG Update Labeling Add part numbers denotation to indicate color Revision # V1.0 V1.1 V1.2 Revision Date 01/23/2013 04/14/2016 09/16/2016 Disclaimer QT-BRIGHTEK reserves the right to make changes without further notice to any products herein to improve reliability, function or design. QT-BRIGHTEK does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent rights, nor the rights of others. Life Support Policy QT-BRIGHTEK’s products are not authorized for use as critical components in life support devices or systems without the express written approval of QT-BRIGHTEK. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Product: QBLP653-SAG Date: September 16, 2016 Version# 1.2 Page 9 of 9