B39162B1267L210

Data sheet Micro-acoustic diplexer GPS L5 + GNSS L1 Part number: B1267 Ordering code: B39162B1267L210 Date: May 29, 2020 Version: 2.0 DCN: 80-PA243-479 Rev. A RF360 products mentioned within this document are products of RF360 Europe GmbH and other subsidiaries of RF360 Holdings Singapore Pte. Ltd. (collectively, the “RF360 Subsidiaries”). RF360 Europe GmbH, Anzinger Str. 13, München, Germany © 2020 RF360 Europe GmbH and/or its affiliated companies. All rights reserved. Micro-acoustic diplexer B1267 Data sheet These materials, including the information contained herein, may be used only for informational purposes by the customer. The RF360 Subsidiaries assume no responsibility for errors or omissions in these materials or the information contained herein. The RF360 Subsidiaries reserve the right to make changes to the product(s) or information contained herein without notice. The materials and information are provided on an AS IS basis, and the RF360 Subsidiaries assume no liability and make no warranty or representation, either expressed or implied, with respect to the materials, or any output or results based on the use, application, or evaluation of such materials, including, without limitation, with respect to the non-infringement of trademarks, patents, copyrights or any other intellectual property rights or other rights of third parties. No use of this documentation or any information contained herein grants any license, whether express, implied, by estoppel or otherwise, to any intellectual property rights, including, without limitation, to any patents owned by QUALCOMM Incorporated or any of its subsidiaries. Not to be used, copied, reproduced, or modified in whole or in part, nor its contents revealed in any manner to others without the express written permission of RF360 Europe GmbH. Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries. Other product and brand names may be trademarks or registered trademarks of their respective owners. This technical data may be subject to U.S. and international export, re-export, or transfer (“export”) laws. Diversion contrary to U.S. and international law is strictly prohibited. Please read Cautions and warnings and Important notes at the end of this document. Page 2 of 23 May 29, 2020 May contain US and international export controlled information. Micro-acoustic diplexer B1267 Data sheet Table of contents 1 Application........................................................................................................................................ 4 2 Features........................................................................................................................................... 4 3 Package........................................................................................................................................... 5 4 Pin configuration............................................................................................................................... 5 5 Matching circuit................................................................................................................................. 6 6 Characteristics ANT – GPS L5......................................................................................................... 7 7 Characteristics ANT – GNSS L1.......................................................................................................8 8 Maximum ratings............................................................................................................................ 10 9 Transmission coefficient ANT – GPS L5.........................................................................................11 10 Reflection coefficients ANT – GPS L5..........................................................................................12 11 Transmission coefficient ANT – GNSS L1....................................................................................13 12 Reflection coefficients ANT – GNSS L1........................................................................................14 13 Packing material........................................................................................................................... 15 14 Marking......................................................................................................................................... 19 15 Soldering profile............................................................................................................................ 20 16 Annotations.................................................................................................................................. 21 17 Cautions and warnings.................................................................................................................22 18 Important notes............................................................................................................................. 23 Please read Cautions and warnings and Important notes at the end of this document. Page 3 of 23 May 29, 2020 May contain US and international export controlled information. Micro-acoustic diplexer B1267 Data sheet 1 Application  Diplexer for GPS L5 and GNSS L1 navigation bands with single ended 50Ω ports.  Ultra-low-loss acoustic structure.  Highly integrated with no external matching.  Usable GNSS L1 pass bands: 1559.05 – 1563.15 MHz (BeiDou), 1574.39 – 1576.45 MHz (GPS), 1597.55 – 1605.89 MHz (Glonass). Usable GPS L5 pass band: 1166.22 – 1186.68 MHz. 2        Features Package height 0.6 mm Package size 1.5 mm × 1.1 mm RoHS compatible Package for Surface Mount Technology (SMT) Ni/Au-plated terminals Electrostatic Sensitive Device (ESD) Moisture Sensitivity Level 3 (MSL3) Please read Cautions and warnings and Important notes at the end of this document. Page 4 of 23 May 29, 2020 May contain US and international export controlled information. Micro-acoustic diplexer B1267 Data sheet 3 Package 4 Pin configuration  1 ANT  6 GPS L5  9 GNSS L1  2, 3, 4, 5, Ground 7, 8, 10 Figure 1: Drawing of package with package height A = 0.7 mm (max.). See Sec. Package information (p. 22). Please read Cautions and warnings and Important notes at the end of this document. Page 5 of 23 May 29, 2020 May contain US and international export controlled information. Micro-acoustic diplexer B1267 Data sheet 5 Matching circuit Figure 2: Schematic of matching circuit. No external matching components required. Please read Cautions and warnings and Important notes at the end of this document. Page 6 of 23 May 29, 2020 May contain US and international export controlled information. Micro-acoustic diplexer B1267 Data sheet 6 Characteristics ANT – GPS L5 Temperature range for specification ANT terminating impedance GNSS L1 terminating impedance GPS L5 terminating impedance TSPEC ZANT ZGNSS L1 ZGPS L5 = = = = −30 °C ... +85 °C 50 Ω 50 Ω 50 Ω Characteristics ANT – GPS L5 min. typ. max. for TSPEC @ +25 °C for TSPEC Insertion loss α 1166.22... 1186.68 MHz — 1.2 1.51) dB 1166.22... 1186.68 MHz — 1.2 2.2 dB 1166.22... 1186.68 MHz — 1.4 1.81) 1166.22... 1186.68 MHz — 1.4 2.3 1166.22... 1186.68 MHz — 1.4 1.81) — 1.4 2.3 1166.22... 1186.68 MHz — 0.4 1.51) dB 1166.22... 1186.68 MHz — 0.4 2.0 dB VSWR @ ANT port @ GPS L5 port 1166.22... 1186.68 MHz Amplitude ripple (p-p) Δα Attenuation 1) 2) α 100... 824 MHz 35 45 — dB 824... 915 MHz 35 45 — dB 825... 960 MHz 35 45 — dB 1427... 1463 MHz 32 44 — dB 1559... 1606 MHz 20 40 — dB 1710... 1785 MHz 35 43 — dB 1850... 2025 MHz 35 43 — dB 2300... 2690 MHz 30 48 — dB 3400... 3800 MHz 25 49 — dB 4400... 4900 MHz 24 34 — dB 5150... 5925 MHz 23 33 — dB 2) 2) 2) 2) 2) 2) 2) 2) 2) 2) Valid for typical temperature T = +25 °C. Averaged over any 10 MHz. Please read Cautions and warnings and Important notes at the end of this document. Page 7 of 23 May 29, 2020 May contain US and international export controlled information. Micro-acoustic diplexer B1267 Data sheet 7 Characteristics ANT – GNSS L1 Temperature range for specification ANT terminating impedance GNSS L1 terminating impedance GPS L5 terminating impedance TSPEC ZANT ZGNSS L1 ZGPS L5 = = = = −30 °C ... +85 °C 50 Ω 50 Ω 50 Ω Characteristics ANT – GNSS L1 min. typ. max. for TSPEC @ +25 °C for TSPEC Insertion loss ANT – BeiDou B1 ANT – GPS L1 ANT – GLONASS L1 α 1559.05... 1563.15 MHz — 1.53) 1.91),3) dB 1559.05... 1563.15 MHz — 1.5 2.3 dB 1574.39... 1576.45 MHz — 1.2 1.5 dB 1574.39... 1576.45 MHz — 1.2 1.8 dB 1597.55... 1605.89 MHz — 1597.55... 1605.89 MHz — 1597.55... 1605.89 MHz 3) 1) 1.6 1),4) 2.0 dB 1.64) 2.42),4) dB — 3 15 ns 1559.05... 1563.15 MHz — 1.5 1.81) 1559.05... 1563.15 MHz — 1.5 2.3 1574.39... 1576.45 MHz — 1.3 1.61) 1574.39... 1576.45 MHz — 1.3 2.0 1597.55... 1605.89 MHz — 1.5 1.71) 1597.55... 1605.89 MHz — 1.5 2.0 1559.05... 1563.15 MHz — 1.5 1.81) 1559.05... 1563.15 MHz — 1.5 2.3 1574.39... 1576.45 MHz — 1.3 1.61) 1574.39... 1576.45 MHz — 1.3 2.0 1597.55... 1605.89 MHz — 1.5 1.71) 1597.55... 1605.89 MHz — 1.5 2.0 1559.05... 1563.15 MHz — 0.1 1.31) dB 1559.05... 1563.15 MHz — 0.1 1.8 dB 1574.39... 1576.45 MHz — 0.1 1.3 dB 1574.39... 1576.45 MHz — 0.1 1.8 dB 1597.55... 1605.89 MHz — 0.3 1.3 dB 1597.55... 1605.89 MHz — 0.3 1.8 dB Group delay ripple (p-p) ANT – GLONASS L1 3) 4) Dt VSWR @ ANT port @ GNSS L1 port Amplitude ripple (p-p) ANT – BeiDou B1 ANT – GPS L1 ANT – GLONASS L1 Δα Attenuation Please read Cautions and warnings and Important notes at the end of this document. 1) 1) α 100... 824 MHz 35 45 — dB 824... 915 MHz 35 44 — dB 825... 960 MHz 35 44 — dB 1166... 1187 MHz 25 43 — dB 1427... 1463 MHz 32 40 — dB Page 8 of 23 May 29, 2020 May contain US and international export controlled information. Micro-acoustic diplexer B1267 Data sheet Characteristics ANT – GNSS L1 1) 2) 3) 4) 5) min. typ. max. for TSPEC @ +25 °C for TSPEC 1710... 1785 MHz 35 44 — dB 1850... 2025 MHz 37 45 — dB 2300... 2690 MHz 32 45 — dB 3400... 3800 MHz 25 40 — dB 4400... 4900 MHz 25 37 — dB 5150... 5925 MHz 25 40 — dB 5) 5) Valid for typical temperature T = +25 °C. Valid for temperature T = −30 °C...+60 °C. Averaged over any 4.092 MHz. Averaged over any 1.022 MHz. Averaged over any 10 MHz. Please read Cautions and warnings and Important notes at the end of this document. Page 9 of 23 May 29, 2020 May contain US and international export controlled information. Micro-acoustic diplexer B1267 Data sheet 8 Maximum ratings Storage temperature TSTG2) = −40 °C ... +85 °C1) DC voltage |VDC| = 5.0 V (max.)3) ESD voltage Input power VESD4) = 225 V (max.) Machine model. VESD5) = 400 V (max.) Human body model. VESD Charged device model. 6) = 700 V (max.) PIN @ ANT port: 1166.22 ... 1186.68 MHz 10 dBm Continuous wave for 3000 h @ 50 °C. @ ANT port: 1559.05 ... 1605.89 MHz 10 dBm Continuous wave for 3000 h @ 50 °C. 1) 2) 3) 4) 5) 6) Extended upper limit: 96h@125°C acc. to IEC 60068-2-2-Bb. Not valid for packaging material. Storage temperature for packaging material is −25 °C to +40 °C. 168h Damp Heat Steady State acc. to IEC 60068-2-67 Cy. According to JESD22-A115B (MM – Machine Model), 10 negative & 10 positive pulses. According to JESD22-A114F (HBM – Human Body Model), 1 negative & 1 positive pulse. According to JESD22-C101C (CDM – Field Induced Charged Device Model), 3 negative & 3 positive pulses. Please read Cautions and warnings and Important notes at the end of this document. Page 10 of 23 May 29, 2020 May contain US and international export controlled information. Micro-acoustic diplexer B1267 Data sheet 9 Transmission coefficient ANT – GPS L5 Figure 3: Attenuation ANT – GPS L5. Please read Cautions and warnings and Important notes at the end of this document. Page 11 of 23 May 29, 2020 May contain US and international export controlled information. Micro-acoustic diplexer B1267 Data sheet 10 Reflection coefficients ANT – GPS L5 Figure 4: Reflection coefficient at ANT port. Figure 5: Reflection coefficient at GPS L5 port. Please read Cautions and warnings and Important notes at the end of this document. Page 12 of 23 May 29, 2020 May contain US and international export controlled information. Micro-acoustic diplexer B1267 Data sheet 11 Transmission coefficient ANT – GNSS L1 Figure 6: Attenuation ANT – GNSS L1. Please read Cautions and warnings and Important notes at the end of this document. Page 13 of 23 May 29, 2020 May contain US and international export controlled information. Micro-acoustic diplexer B1267 Data sheet 12 Reflection coefficients ANT – GNSS L1 Figure 7: Reflection coefficient at ANT port. Figure 8: Reflection coefficient at GNSS L1 port. Please read Cautions and warnings and Important notes at the end of this document. Page 14 of 23 May 29, 2020 May contain US and international export controlled information. Micro-acoustic diplexer B1267 Data sheet 13 Packing material 13.1 Tape Figure 9: Drawing of tape (first-angle projection) for illustration only and not to scale. The valid tape dimensions are listed in Table 1. A0 1.35±0.05 mm B0 1.75±0.05 mm E2 6.25 mm (min.) P1 4.0±0.1 mm F 3.5±0.05 mm D0 1.5+0.1/−0 mm G 0.75 mm (min.) D1 0.8 mm (min.) K0 0.76±0.05 mm E1 1.75±0.1 mm P0 4.0±0.1 mm P2 2.0±0.05 mm T 0.25±0.03 mm W 8.0+0.3/−0.1 mm Table 1: Tape dimensions. Please read Cautions and warnings and Important notes at the end of this document. Page 15 of 23 May 29, 2020 May contain US and international export controlled information. Micro-acoustic diplexer B1267 Data sheet 13.2 Reel with diameter of 180 mm Figure 10: Drawing of reel (first-angle projection) with diameter of 180 mm. Figure 11: Drawing of moisture barrier bag (MBB) for reel with diameter of 180 mm. Please read Cautions and warnings and Important notes at the end of this document. Page 16 of 23 May 29, 2020 May contain US and international export controlled information. Micro-acoustic diplexer B1267 Data sheet Figure 12: Drawing of folding box for reel with diameter of 180 mm. 13.3 Reel with diameter of 330 mm Figure 13: Drawing of reel (first-angle projection) with diameter of 330 mm. Please read Cautions and warnings and Important notes at the end of this document. Page 17 of 23 May 29, 2020 May contain US and international export controlled information. Micro-acoustic diplexer B1267 Data sheet Figure 14: Drawing of moisture barrier bag (MBB) for reel with diameter of 330 mm. Figure 15: Drawing of folding box for reel with diameter of 330 mm. Please read Cautions and warnings and Important notes at the end of this document. Page 18 of 23 May 29, 2020 May contain US and international export controlled information. Micro-acoustic diplexer B1267 Data sheet 14 Marking Products are marked with product type number and lot number encoded according to Table 2:  Type number: The 4 digit type number of the ordering code, is encoded by a special BASE32 code into a 3 digit marking. e.g., B3xxxxB1234xxxx, Example of decoding type number marking on device 16J => 1 x 322 + 6 x 321 + 18 (=J) x 320 = The BASE32 code for product type B1267 is 17K. in decimal code. 1234 1234  Lot number: The last 5 digits of the lot number, e.g., are encoded based on a special BASE47 code into a 3 digit marking. Example of decoding lot number marking on device 5UY 5 x 472 + 27 (=U) x 471 + 31 (=Y) x 470 Adopted BASE32 code for type number Decimal Base32 Decimal Base32 value code value code 0 0 16 G 1 1 17 H 2 2 18 J 3 3 19 K 4 4 20 M 5 5 21 N 6 6 22 P 7 7 23 Q 8 8 24 R 9 9 25 S 10 A 26 T 11 B 27 V 12 C 28 W 13 D 29 X 14 E 30 Y 15 F 31 Z => = 12345, in decimal code. 12345 12345 Adopted BASE47 code for lot number Decimal Base47 Decimal Base47 value code value code 0 0 24 R 1 1 25 S 2 2 26 T 3 3 27 U 4 4 28 V 5 5 29 W 6 6 30 X 7 7 31 Y 8 8 32 Z 9 9 33 b 10 A 34 d 11 B 35 f 12 C 36 h 13 D 37 n 14 E 38 r 15 F 39 t 16 G 40 v 17 H 41 \ 18 J 42 ? 19 K 43 { 20 L 44 } 21 M 45 < 22 N 46 > 23 P Table 2: Lists for encoding and decoding of marking. Please read Cautions and warnings and Important notes at the end of this document. Page 19 of 23 May 29, 2020 May contain US and international export controlled information. Micro-acoustic diplexer B1267 Data sheet 15 Soldering profile The recommended soldering process is in accordance with IEC 60068-2-58 – 3rd edit and IPC/JEDEC J-STD-020B. ramp rate ≤ 3 K/s preheat 125 °C to 220 °C, 150 s to 210 s, 0.4 K/s to 1.0 K/s T > 220 °C 30 s to 70 s T > 230 °C min. 10 s T > 245 °C max. 20 s T ≥ 255 °C – peak temperature Tpeak 250 °C +0/-5 °C wetting temperature Tmin 230 °C +5/-0 °C for 10 s ± 1 s cooling rate ≤ 3 K/s soldering temperature T measured at solder pads Table 3: Characteristics of recommended soldering profile for lead-free solder (Sn95.5Ag3.8Cu0.7). Figure 16: Recommended reflow profile for convection and infrared soldering – lead-free solder. Please read Cautions and warnings and Important notes at the end of this document. Page 20 of 23 May 29, 2020 May contain US and international export controlled information. Micro-acoustic diplexer B1267 Data sheet 16 Annotations 16.1 RoHS compatibility ROHS-compatible means that products are compatible with the requirements according to Art. 4 (substance restrictions) of Directive 2011/65/EU of the European Parliament and of the Council of June 8th, 2011, on the restriction of the use of certain hazardous substances in electrical and electronic equipment ("Directive") with due regard to the application of exemptions as per Annex III of the Directive in certain cases. 16.2 Scattering parameters (S-parameters) The pin/port assignment is available in the headers of the S-parameter files. Please contact your local RF360 sales office. 16.3 Ordering codes and packing units Ordering code Packing unit B39162B1267L210 15,000 pcs B39162B1267L210S 5 5,000 pcs Table 4: Ordering codes and packing units. Please read Cautions and warnings and Important notes at the end of this document. Page 21 of 23 May 29, 2020 May contain US and international export controlled information. Micro-acoustic diplexer B1267 Data sheet 17 Cautions and warnings 17.1 Display of ordering codes for RF360 products The ordering code for one and the same product can be represented differently in data sheets, data books, other publications and the website of RF360, or in order-related documents such as shipping notes, order confirmations and product labels. The varying representations of the ordering codes are due to different processes employed and do not affect the specifications of the respective products. Detailed information can be found on the Internet under https://rffe.qualcomm.com/. 17.2 Material information Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our sales offices. For information on recycling of tapes and reels please contact one of our sales offices. 17.3 Moldability Before using in overmolding environment, please contact your local RF360 sales office. 17.4 Package information Landing area The printed circuit board (PCB) land pattern (landing area) shown is based on RF360 internal development and empirical data and illustrated for example purposes, only. As customers' SMD assembly processes may have a plenty of variants and influence factors which are not under control or knowledge of RF360, additional careful process development on customer side is necessary and strongly recommended in order to achieve best soldering results tailored to the particular customer needs. Dimensions Unless otherwise specified all dimensions are understood using unit millimeter (mm). Projection method Unless otherwise specified first-angle projection is applied. Please read Cautions and warnings and Important notes at the end of this document. Page 22 of 23 May 29, 2020 May contain US and international export controlled information. Micro-acoustic diplexer B1267 Data sheet 18 Important notes The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, RF360 Europe GmbH and its affiliates are either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an RF360 product with the properties described in the product specification is suitable for use in a particular customer application. 2. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. The warnings, cautions and product-specific notes must be observed. 4. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (https://rffe.qualcomm.com). Should you have any more detailed questions, please contact our sales offices. 5. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. Please read Cautions and warnings and Important notes at the end of this document. Page 23 of 23 May 29, 2020 May contain US and international export controlled information.