B39162B4327P810

Data sheet SAW RF filter Beidou; GPS; GLONASS Series/type: B4327 Ordering code: B39162B4327P810 Date: October 25, 2019 Version: 2.2 DCN: 80-PA243-408 Rev. A RF360 products mentioned within this document are products of RF360 Europe GmbH and other subsidiaries of RF360 Holdings Singapore Pte. Ltd. (collectively, the “RF360 Subsidiaries”). RF360 Europe GmbH, Anzinger Str. 13, München, Germany © 2019 RF360 Europe GmbH and/or its affiliated companies. All rights reserved. SAW RF filter B4327 Data sheet These materials, including the information contained herein, may be used only for informational purposes by the customer. The RF360 Subsidiaries assume no responsibility for errors or omissions in these materials or the information contained herein. The RF360 Subsidiaries reserve the right to make changes to the product(s) or information contained herein without notice. The materials and information are provided on an AS IS basis, and the RF360 Subsidiaries assume no liability and make no warranty or representation, either expressed or implied, with respect to the materials, or any output or results based on the use, application, or evaluation of such materials, including, without limitation, with respect to the non-infringement of trademarks, patents, copyrights or any other intellectual property rights or other rights of third parties. No use of this documentation or any information contained herein grants any license, whether express, implied, by estoppel or otherwise, to any intellectual property rights, including, without limitation, to any patents owned by QUALCOMM Incorporated or any of its subsidiaries. Not to be used, copied, reproduced, or modified in whole or in part, nor its contents revealed in any manner to others without the express written permission of RF360 Europe GmbH. Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries. Other product and brand names may be trademarks or registered trademarks of their respective owners. This technical data may be subject to U.S. and international export, re-export, or transfer (“export”) laws. Diversion contrary to U.S. and international law is strictly prohibited. Please read Cautions and warnings and Important notes at the end of this document. Page 2 of 19 October 25, 2019 May contain US and international export controlled information. SAW RF filter B4327 Data sheet Table of contents 1 Application......................................................................................................................................... 4 2 Features............................................................................................................................................ 4 3 Package............................................................................................................................................ 5 4 Pin configuration................................................................................................................................ 5 5 Matching circuit................................................................................................................................. 6 6 Characteristics................................................................................................................................... 7 7 Maximum ratings............................................................................................................................... 8 8 Transmission coefficient.................................................................................................................... 9 9 Reflection coefficients...................................................................................................................... 10 10 Group delay................................................................................................................................... 11 11 Packing material............................................................................................................................ 12 12 Marking.......................................................................................................................................... 15 13 Soldering profile............................................................................................................................. 16 14 Annotations................................................................................................................................... 17 15 Cautions and warnings.................................................................................................................. 18 16 Important notes.............................................................................................................................. 19 Please read Cautions and warnings and Important notes at the end of this document. Page 3 of 19 October 25, 2019 May contain US and international export controlled information. SAW RF filter B4327 Data sheet 1 Application  Low-loss RF GPS + COMPASS + Galileo + GLONASS filter  Simultaneous usages of GPS, COMPASS, Galileo and GLONASS  Usable pass band: 2.0 MHz for GPS, 4.092 MHz for COMPASS, 4.092 MHz for Galileo and 7.88MHz forGLONASS  Very low insertion attenuation  High out of band selectivity  Low amplitude ripple  Filter impedance 50 Ω  No matching network required for operation at 50 Ω 2           Figure 1: Picture of component with example of product marking. Features Package size 1.4±0.1 mm × 1.1±0.1 mm Package height 0.45 mm (max.) Approximate weight 3 mg RoHS compatible Package for Surface Mount Technology (SMT) Ni/Au-plated terminals Filter surface passivated Electrostatic Sensitive Device (ESD) Moisture Sensitivity Level 2a (MSL2a) AEC-Q200 qualified component family (Grade 3: −40 °C to +85 °C) Please read Cautions and warnings and Important notes at the end of this document. Page 4 of 19 October 25, 2019 May contain US and international export controlled information. SAW RF filter B4327 Data sheet 3 Package 4 Pin configuration  1 Input  4 Output  2, 3, 5 Ground Figure 2: Drawing of package with package height A = 0.45 mm (max.). See Sec. Package information (p. 18). Please read Cautions and warnings and Important notes at the end of this document. Page 5 of 19 October 25, 2019 May contain US and international export controlled information. SAW RF filter B4327 Data sheet 5 Matching circuit Figure 3: Schematic of matching circuit. No external matching components required. Please read Cautions and warnings and Important notes at the end of this document. Page 6 of 19 October 25, 2019 May contain US and international export controlled information. SAW RF filter B4327 Data sheet 6 Characteristics Temperature range for specification Input terminating impedance Output terminating impedance TSPEC ZIN ZOUT = −40 °C ... +85 °C = 50 Ω = 50 Ω Characteristics min. typ. max. for TSPEC @ +25 °C for TSPEC Center frequency fC — 1582.4 — MHz 1574.42... 1576.42 MHz — 1.0 1.4 dB 1559.05... 1563.15 MHz — 1.4 2.0 dB 1573.37... 1577.47 MHz — 1.0 2.0 dB 1597.78... 1605.66 MHz — 1.4 2.0 dB — 4.0 14 ns 1574.42... 1576.42 MHz — 1.4 2.0 1559.05... 1563.15 MHz — 1.5 2.0 1573.37... 1577.47 MHz — 1.5 2.0 1597.78... 1605.66 MHz — 1.5 2.0 1574.42... 1576.42 MHz — 1.4 2.0 1559.05... 1563.15 MHz — 1.5 2.0 1573.37... 1577.47 MHz — 1.5 2.0 1597.78... 1605.66 MHz — 1.5 2.0 Maximum insertion attenuation Group delay ripple αmax var 1) 1597.78... 1605.66 MHz Maximum VSWR @ input port @ output port VSWRmax Minimum attenuation 1) αmin 50... 824 MHz 40 44 — dB 824... 925 MHz 39 43 — dB 1427... 1453 MHz 43 47 — dB 1710... 1785 MHz 34 48 — dB 1850... 1910 MHz 38 46 — dB 1920... 1980 MHz 39 46 — dB 2400... 2500 MHz 43 46 — dB 2500... 2570 MHz 38 43 — dB 2600... 3000 MHz 34 39 — dB Averaged over 2 MHz. Please read Cautions and warnings and Important notes at the end of this document. Page 7 of 19 October 25, 2019 May contain US and international export controlled information. SAW RF filter B4327 Data sheet 7 Maximum ratings Operable temperature TOP = −40 °C ... +85 °C Storage temperature TSTG2) = −40 °C ... +85 °C DC voltage |VDC|1) = 0 V Input power PIN @ input port: 915 MHz 23 dBm 1/8 duty cycle for 5000 h @ 50 °C. @ input port: 1453 MHz 15 dBm CW. @ input port: 1710 MHz 15 dBm CW. 1) 2) In case of applied DC voltage blocking capacitors are mandatory. Not valid for packaging material. Storage temperature for packaging material is −25 °C to +40 °C. Please read Cautions and warnings and Important notes at the end of this document. Page 8 of 19 October 25, 2019 May contain US and international export controlled information. SAW RF filter B4327 Data sheet 8 Transmission coefficient Figure 4: Attenuation. Please read Cautions and warnings and Important notes at the end of this document. Page 9 of 19 October 25, 2019 May contain US and international export controlled information. SAW RF filter B4327 Data sheet 9 Reflection coefficients Figure 5: Reflection coefficient at input port. Figure 6: Reflection coefficient at output port. Please read Cautions and warnings and Important notes at the end of this document. Page 10 of 19 October 25, 2019 May contain US and international export controlled information. SAW RF filter B4327 Data sheet 10 Group delay Figure 7: Group delay ripple. Please read Cautions and warnings and Important notes at the end of this document. Page 11 of 19 October 25, 2019 May contain US and international export controlled information. SAW RF filter B4327 Data sheet 11 Packing material 11.1 Tape Figure 8: Drawing of tape (first-angle projection) for illustration only and not to scale. The valid tape dimensions are listed in Table 1. A0 1.27±0.05 mm E2 6.25 mm (min.) B0 1.57±0.05 mm F 3.5±0.05 mm D0 1.5+0.1/−0 mm G 0.75 mm (min.) D1 0.5±0.1 mm K0 0.62±0.05 mm E1 1.75±0.1 mm P0 4.0±0.1 mm P1 4.0±0.1 mm P2 2.0±0.05 mm T 0.25±0.03 mm W 8.0+0.3/−0.1 mm Table 1: Tape dimensions. Please read Cautions and warnings and Important notes at the end of this document. Page 12 of 19 October 25, 2019 May contain US and international export controlled information. SAW RF filter B4327 Data sheet 11.2 Reel with diameter of 180 mm Figure 9: Drawing of reel (first-angle projection) with diameter of 180 mm. Figure 10: Drawing of moisture barrier bag (MBB) for reel with diameter of 180 mm. Please read Cautions and warnings and Important notes at the end of this document. Page 13 of 19 October 25, 2019 May contain US and international export controlled information. SAW RF filter B4327 Data sheet Figure 11: Drawing of folding box for reel with diameter of 180 mm. Please read Cautions and warnings and Important notes at the end of this document. Page 14 of 19 October 25, 2019 May contain US and international export controlled information. SAW RF filter B4327 Data sheet 12 Marking Products are marked with product type number and lot number encoded according to Table 2:  Type number: The 4 digit type number of the ordering code, is encoded by a special BASE32 code into a 3 digit marking. e.g., B3xxxxB1234xxxx, Example of decoding type number marking on device 16J => 1 x 322 + 6 x 321 + 18 (=J) x 320 = The BASE32 code for product type B4327 is 477. in decimal code. 1234 1234  Lot number: The last 5 digits of the lot number, e.g., are encoded based on a special BASE47 code into a 3 digit marking. Example of decoding lot number marking on device 5UY 5 x 472 + 27 (=U) x 471 + 31 (=Y) x 470 Adopted BASE32 code for type number Decimal Base32 Decimal Base32 value code value code 0 0 16 G 1 1 17 H 2 2 18 J 3 3 19 K 4 4 20 M 5 5 21 N 6 6 22 P 7 7 23 Q 8 8 24 R 9 9 25 S 10 A 26 T 11 B 27 V 12 C 28 W 13 D 29 X 14 E 30 Y 15 F 31 Z => = 12345, in decimal code. 12345 12345 Adopted BASE47 code for lot number Decimal Base47 Decimal Base47 value code value code 0 0 24 R 1 1 25 S 2 2 26 T 3 3 27 U 4 4 28 V 5 5 29 W 6 6 30 X 7 7 31 Y 8 8 32 Z 9 9 33 b 10 A 34 d 11 B 35 f 12 C 36 h 13 D 37 n 14 E 38 r 15 F 39 t 16 G 40 v 17 H 41 \ 18 J 42 ? 19 K 43 { 20 L 44 } 21 M 45 < 22 N 46 > 23 P Table 2: Lists for encoding and decoding of marking. Please read Cautions and warnings and Important notes at the end of this document. Page 15 of 19 October 25, 2019 May contain US and international export controlled information. SAW RF filter B4327 Data sheet 13 Soldering profile The recommended soldering process is in accordance with IEC 60068-2-58 – 3rd edit and IPC/JEDEC J-STD-020B. ramp rate ≤ 3 K/s preheat 125 °C to 220 °C, 150 s to 210 s, 0.4 K/s to 1.0 K/s T > 220 °C 30 s to 70 s T > 230 °C min. 10 s T > 245 °C max. 20 s T ≥ 255 °C – peak temperature Tpeak 250 °C +0/-5 °C wetting temperature Tmin 230 °C +5/-0 °C for 10 s ± 1 s cooling rate ≤ 3 K/s soldering temperature T measured at solder pads Table 3: Characteristics of recommended soldering profile for lead-free solder (Sn95.5Ag3.8Cu0.7). Figure 12: Recommended reflow profile for convection and infrared soldering – lead-free solder. Please read Cautions and warnings and Important notes at the end of this document. Page 16 of 19 October 25, 2019 May contain US and international export controlled information. SAW RF filter B4327 Data sheet 14 Annotations 14.1 RoHS compatibility ROHS-compatible means that products are compatible with the requirements according to Art. 4 (substance restrictions) of Directive 2011/65/EU of the European Parliament and of the Council of June 8th, 2011, on the restriction of the use of certain hazardous substances in electrical and electronic equipment ("Directive") with due regard to the application of exemptions as per Annex III of the Directive in certain cases. 14.2 Scattering parameters (S-parameters) The pin/port assignment is available in the headers of the S-parameter files. Please contact your local RF360 sales office. Please read Cautions and warnings and Important notes at the end of this document. Page 17 of 19 October 25, 2019 May contain US and international export controlled information. SAW RF filter B4327 Data sheet 15 Cautions and warnings 15.1 Display of ordering codes for RF360 products The ordering code for one and the same product can be represented differently in data sheets, data books, other publications and the website of RF360, or in order-related documents such as shipping notes, order confirmations and product labels. The varying representations of the ordering codes are due to different processes employed and do not affect the specifications of the respective products. Detailed information can be found on the Internet under https://rffe.qualcomm.com/. 15.2 Material information Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our sales offices. For information on recycling of tapes and reels please contact one of our sales offices. 15.3 Moldability Before using in overmolding environment, please contact your local RF360 sales office. 15.4 Package information Landing area The printed circuit board (PCB) land pattern (landing area) shown is based on RF360 internal development and empirical data and illustrated for example purposes, only. As customers' SMD assembly processes may have a plenty of variants and influence factors which are not under control or knowledge of RF360, additional careful process development on customer side is necessary and strongly recommended in order to achieve best soldering results tailored to the particular customer needs. Dimensions Unless otherwise specified all dimensions are understood using unit millimeter (mm). Dimensions do not include burrs. Projection method Unless otherwise specified first-angle projection is applied. Please read Cautions and warnings and Important notes at the end of this document. Page 18 of 19 October 25, 2019 May contain US and international export controlled information. SAW RF filter B4327 Data sheet 16 Important notes The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, RF360 Europe GmbH and its affiliates are either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an RF360 product with the properties described in the product specification is suitable for use in a particular customer application. 2. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. The warnings, cautions and product-specific notes must be observed. 4. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (https://rffe.qualcomm.com). Should you have any more detailed questions, please contact our sales offices. 5. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. Please read Cautions and warnings and Important notes at the end of this document. Page 19 of 19 October 25, 2019 May contain US and international export controlled information.