B39162B7839K410

SAW Components SAW Rx Filter GPS Series/Type: Ordering code: B7839 B39162-B7839-K410 Date: Version: Nov 16, 2005 2.1  EPCOS AG 2005. Reproduction, publication and dissemination of this data sheet, enclosures hereto and the information contained therein without EPCOS’ prior express consent is prohibited. SAW Components B7839 1575.42 MHz Low-Loss Filter for Mobile Communication Data Sheet Application ■ Low-loss RF filter for GPS ■ Unbalanced to unbalanced operation ■ Very low insertion attenuation Features 0.735 0,075 0,38 0,44 5 bottom view 0,68 3 1 0,075 2 side view 1,4 Package size 2.0 x1.4 x 0.68 mm3 Package code QCS5E RoHS compliant Approx. weight 0.007 g Package for Surface Mount Technology (SMT) ■ Ni, gold-plated terminals ■ ■ ■ ■ ■ top view 4 2,0 Pin configuration ■ 4 ■ 1 ■ 2,3,5 Input, unbalanced Output unlanced To be grounded Please read cautions and warnings and important notes at the end of this document. 2 Nov 16, 2005 SAW Components B7839 1575.42 MHz Low-Loss Filter for Mobile Communication Data Sheet Characteristics Operating temperature range: Terminating source impedance: Terminating load impedance: T = –30 ˚C ... +85 ˚C ZS = 50 Ω ZL = 50 Ω — B7839 typ. @ 25 ˚C 1575.42 — — min. max. — MHz 0.75 0.75 1.1 1.0 dB dB1) — 0.05 0.3 dB 960.0 MHz 1460.0 MHz 1513.0 MHz 1710.0 MHz 1990.0 MHz 4000.0 MHz 6000.0 MHz 38 35 22 23 35 30 20 41 40 29 28 40 35 28 — — — — — — — dB dB dB dB dB dB dB 1574.42 ... 1576.42MHz — 1.1 1.8 Nominal frequency fN Maximum insertion attenuation 1574.42 ... 1576.42MHz 1574.42 ... 1576.42MHz αmax Amplitude ripple in passband (p-p) 1574.42 ... 1576.42MHz ∆α Attenuation α 0.1 960.0 1460.0 1645.4 1710.0 1990.0 4000.0 ... ... ... ... ... ... ... VSWR 1) 0 ˚C ... +55 ˚C Maximum ratings Operable temperature range T –40/+85 ˚C Storage temperature range Tstg –40/+85 ˚C DC voltage VDC 3 V ESD voltage Input Power at 1574.42 ... 1576.42 MHz 50.0...1460 and 1710 ... 4000 MHz VESD 501) V machine model, 10 pulses source and load impedance 50 Ω continuous wave signal 1) PIN 3 dBm PIN 25 dBm acc. to JESD22-A115A (machine model), 10 negative & 10 positive pulses. Please read cautions and warnings and important notes at the end of this document. 3 Nov 16, 2005 SAW Components B7839 1575.42 MHz Low-Loss Filter for Mobile Communication Data Sheet Transfer function Transfer function (wideband) Please read cautions and warnings and important notes at the end of this document. 4 Nov 16, 2005 SAW Components B7839 1575.42 MHz Low-Loss Filter for Mobile Communication Data Sheet S11 function S22 function Please read cautions and warnings and important notes at the end of this document. 5 Nov 16, 2005 SAW Components B7839 1575.42 MHz Low-Loss Filter for Mobile Communication Data Sheet Type B7839 Ordering code B39162-B7839-K410 Marking and Package C61157-A7-A131 Packaging F61074-V8151-Z000 Date Codes L_1126 S-Parameters B7839_NB.s3p B7839_WB.s3p Soldering profile S_6001 For further information please contact your local EPCOS sales office or visit our webpage at www.epcos.com . Published by EPCOS AG Surface Acoustic Wave Components Division P.O. Box 80 17 09, 81617 Munich, GERMANY  EPCOS AG 2005. Reproduction, publication and dissemination of this brochure and the information contained therein without EPCOS’ prior express consent is prohibited. Purchase orders are subject to the General Conditions for the Supply of Products and Services of the Electrical and Electronics Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers’ Association), unless otherwise agreed. This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices. Please read cautions and warnings and important notes at the end of this document. 6 Nov 16, 2005 Important notes The following applies to all products named in this publication: 1. 2. 3. 4. 5. 6. 7. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. We also point out that in individual cases, a malfunction of passive electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of a passive electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of a passive electronic component. The warnings, cautions and product-specific notes must be observed. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as “hazardous”). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms of Delivery for Products and Services in the Electrical Industry” published by the German Electrical and Electronics Industry Association (ZVEI). The trade names EPCOS, CeraDiode, CSSP, PhaseCap, PhaseMod, SIFI, SIKOREL, SilverCap, SIMID, SIOV, SIP5D, SIP5K, TOPcap, UltraCap, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks. 7 Nov 16, 2005