SAW filters
Series/Type:
B9104
The following products presented in this data sheet are being withdrawn.
Ordering Code
B39162B9104P810
Substitute Product
Date of Withdrawal
2016-04-22
Deadline Last
Orders
2016-12-31
Last Shipments
2017-03-31
For further information please contact your nearest EPCOS sales office, which will also support you in selecting a suitable substitute. The
addresses of our worldwide sales network are presented at www.epcos.com/sales.
SAW Components
B9104
859.0 / 1575.42 / 1920.0 MHz
SAW CELL / GPS / PCS Triplexer
Data Sheet
Application
■ Low loss LTCC Triplexer for mobile phones covering
Cellular, GPS and PCS band
■ Usable passbands 70 MHz (CELL), 2 MHz (GPS),
140 MHz (PCS)
■ Very low insertion attenuation in CELL, GPS and
PCS band
■ Integrated low loss GPS filter with single ended out-
put 50 Ω
■ Very low amplitude ripple in all bands
■ No switches and control lines required
■ External shunt inductor from ANT pin to ground used
for ESD protection and matching
Features
0.1
5
6
0.1
4
bottom view
2
1
1.34
3
0.5
side view
2.0
Package size 2.5 x 2.0 x 1.34 mm3
RoHS compatible
Approximate weight 0.022 g
Package for Surface Mount Technology (SMT)
Ni, gold-plated terminals
Electrostatic Sensitive Device (ESD)
0.5
■
■
■
■
■
■
top view
2.5
Pin configuration
■
■
■
■
■
1
3
4
6
2,5
1 ANT
ANT Input
GPS Output
CELL Output
PCS Output
Ground
3
4
6
GPS CELL PCS
Please read cautions and warnings and
important notes at the end of this document.
2
July 15, 2010
SAW Components
B9104
859.0 / 1575.42 / 1920.0 MHz
SAW CELL / GPS / PCS Triplexer
Data Sheet
Characteristics
Temperature range for specification:
Terminating source impedance:
Terminating load impedance:
ANT - CELL
Center frequency
Maximum insertion attenuation
824.0 ... 894.0
VSWR
824.0 ... 894.0
ANT - PCS
Center frequency
Maximum insertion attenuation
1850.0 ... 1990.0
VSWR
1850.0 ... 1990.0
Attenuation
3700.0 ... 3830.0
ANT - GPS
Center frequency
Maximum insertion attenuation
1574.42 ... 1576.42
VSWR
1574.42 ... 1576.42
Attenuation
824.0 ... 849.0
1495.0 ... 1515.0
1635.0 ... 1655.0
1710.0 ... 1755.0
1850.0 ... 1980.0
2400.0 ... 2500.0
CELL - GPS
Attenuation
1574.42 ... 1576.42
824.0 ... 849.0
PCS - GPS
Attenuation
1574.42 ... 1576.42
1850.0 ... 1910.0
T = –30 ˚C to +85 ˚C
ZS =
50 Ω || 6.8 nH (ANT)
ZL =
50 Ω (CELL, GPS, PCS)
min.
B9104
typ.
@ 25 ˚C
max.
––
859.0
––
MHz
MHz
––
0.65
0.9
dB
MHz
––
1.35
1.6
––
1920.0
––
MHz
––
0.65
0.9
dB
––
1.3
1.6
9
13
––
dB
––
1575.42
––
MHz
––
0.9
1.5
dB
––
1.3
1.8
32
25
25
35
32
21
37
32
37
40
40
26
––
––
––
––
––
––
dB
dB
dB
dB
dB
dB
20
32
34
37
––
––
dB
dB
12
37
21
50
––
––
dB
dB
fC
αmax
fC
αmax
MHz
MHz
α
MHz
fC
αmax
MHz
MHz
α
MHz
MHz
MHz
MHz
MHz
MHz
α
MHz
MHz
α
MHz
MHz
Please read cautions and warnings and
important notes at the end of this document.
3
July 15, 2010
SAW Components
B9104
859.0 / 1575.42 / 1920.0 MHz
SAW CELL / GPS / PCS Triplexer
Data Sheet
Maximum ratings
Operable temperature range
Storage temperature range
DC voltage
ESD voltage
Input power at
CELL port
824 ... 849 MHz
PCS port
1850 ... 1910 MHz
1)
T
Tstg
VDC
VESD
–30/+85
–40/+85
5
501)
˚C
˚C
V
V
at GPS port
machine model, 10 pulses
effective power in the on-state
continuous wave signal
PIN
31
dBm
PIN
31
dBm
acc. to JESD22-A115A (machine model), 10 negative & 10 positive pulses.
Please read cautions and warnings and
important notes at the end of this document.
4
July 15, 2010
SAW Components
B9104
859.0 / 1575.42 / 1920.0 MHz
SAW CELL / GPS / PCS Triplexer
Data Sheet
ANT - CELL (transfer function):
ANT - PCS (transfer function):
Please read cautions and warnings and
important notes at the end of this document.
5
July 15, 2010
SAW Components
B9104
859.0 / 1575.42 / 1920.0 MHz
SAW CELL / GPS / PCS Triplexer
Data Sheet
ANT - GPS (transfer function):
ANT - GPS (transfer function wideband):
Please read cautions and warnings and
important notes at the end of this document.
6
July 15, 2010
SAW Components
B9104
859.0 / 1575.42 / 1920.0 MHz
SAW CELL / GPS / PCS Triplexer
Data Sheet
CELL - GPS (transfer function):
PCS - GPS (transfer function):
Please read cautions and warnings and
important notes at the end of this document.
7
July 15, 2010
SAW Components
B9104
859.0 / 1575.42 / 1920.0 MHz
SAW CELL / GPS / PCS Triplexer
Data Sheet
Smith charts / VSWR
S11 Antenna (matched with shunt inductor)
S22 GPS
Please read cautions and warnings and
important notes at the end of this document.
8
July 15, 2010
SAW Components
B9104
859.0 / 1575.42 / 1920.0 MHz
SAW CELL / GPS / PCS Triplexer
Data Sheet
Smith charts / VSWR
S33 CELL
S44 PCS
Please read cautions and warnings and
important notes at the end of this document.
9
July 15, 2010
SAW Components
B9104
859.0 / 1575.42 / 1920.0 MHz
SAW CELL / GPS / PCS Triplexer
Data Sheet
References
Type
B9104
Ordering code
B39162B9104P810
Marking and package
C61157-A3-A30
Packaging
F61074-V8225-Z000
Date codes
L_1126
S-parameters (6.8 nH || ANT)
B9104_NB.s4p, B9104_WB.s4p
Soldering profile
S_6001
RoHS compatible
defined as compatible with the following documents:
"DIRECTIVE 2002/95/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. 2005/618/EC from April 18th,
2005, amending Directive 2002/95/EC of the European Parliament and of the Council for the purposes of establishing the
maximum concentration values for certain hazardous substances in electrical and electronic equipment."
Moldability
Before using in overmolding environment, please contact your
EPCOS sales office.
Matching coils
See
http://www.tdk.co.jp/tefe02/coil.htm#aname1
http://www.tdk.co.jp/etvcl/index.htm
for a large variety of matching coils.
For further information please contact your local EPCOS sales office or visit our webpage at
www.epcos.com .
Published by EPCOS AG
Surface Acoustic Wave Components Division
P.O. Box 80 17 09, 81617 Munich, GERMANY
EPCOS AG 2010. This brochure replaces the previous edition.
For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or
the international Representatives.
Due to technical requirements components may contain dangerous substances. For information on
the type in question please also contact one of our Sales Offices.
Please read cautions and warnings and
important notes at the end of this document.
10
July 15, 2010
Important notes
The following applies to all products named in this publication:
1.
2.
3.
4.
5.
6.
7.
Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar
with them than the customers themselves. For these reasons, it is always ultimately
incumbent on the customer to check and decide whether an EPCOS product with the
properties described in the product specification is suitable for use in a particular customer
application.
We also point out that in individual cases, a malfunction of electronic components or
failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in
which the malfunction or failure of an electronic component could endanger human life or
health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by
means of suitable design of the customer application or other action taken by the customer
(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained
by third parties in the event of malfunction or failure of an electronic component.
The warnings, cautions and product-specific notes must be observed.
In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more
detailed questions, please contact our sales offices.
We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be
available. The aforementioned does not apply in the case of individual agreements deviating
from the foregoing for customer-specific products.
Unless otherwise agreed in individual contracts, all orders are subject to the current
version of the “General Terms of Delivery for Products and Services in the Electrical
Industry” published by the German Electrical and Electronics Industry Association
(ZVEI).
The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSMP, CSSP, CTVS, DeltaCap,
DigiSiMic, DSSP, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC, MotorCap, PCC,
PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD,
SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks
registered or pending in Europe and in other countries. Further information will be found on
the Internet at www.epcos.com/trademarks.
11
July 15, 2010