®
RF360 Europe GmbH
A Qualcomm – TDK Joint Venture
SAW Components
SAW GPS + GLONASS Filter
Series/type:
Ordering code:
B9877
B39162B9877P810
Date:
Version:
June 17, 2013
2.0
RF360 products mentioned within this document are offered by RF360 Europe GmbH and other subsidiaries of
RF360 Holdings Singapore Pte. Ltd. (collectively, the “RF360 Subsidiaries”). RF360 Holdings Singapore Pte. Ltd.
is a joint venture of Qualcomm Global Trading Pte. Ltd. and EPCOS AG. References in this documentation to
EPCOS AG should properly reference, and shall be read to reference, the RF360 Subsidiaries.
RF360 Europe GmbH, Anzinger Str. 13, München, Germany
© 2016 RF360 Europe GmbH and/or its affiliated companies. All rights reserved.
These materials, including the information contained herein, may be used only for informational purposes by
the customer. The RF360 Subsidiaries assume no responsibility for errors or omissions in these materials or
the information contained herein. The RF360 Subsidiaries reserve the right to make changes to the product(s)
or information contained herein without notice. The materials and information are provided on an AS IS basis,
and the RF360 Subsidiaries assume no liability and make no warranty or representation, either expressed or
implied, with respect to the materials, or any output or results based on the use, application, or evaluation of
such materials, including, without limitation, with respect to the non-infringement of trademarks, patents,
copyrights or any other intellectual property rights or other rights of third parties.
No use of this documentation or any information contained herein grants any license, whether express, implied,
by estoppel or otherwise, to any intellectual property rights, including, without limitation, to any patents owned
by QUALCOMM Incorporated or any of its subsidiaries.
Not to be used, copied, reproduced, or modified in whole or in part, nor its contents revealed in any manner to
others without the express written permission of RF360 Europe GmbH.
Qualcomm and Qualcomm RF360 are trademarks of Qualcomm Incorporated, registered in the United States
and other countries. RF360 is a trademark of Qualcomm Incorporated. Other product and brand names may be
trademarks or registered trademarks of their respective owners.
This technical data may be subject to U.S. and international export, re-export, or transfer (“export”) laws.
Diversion contrary to U.S. and international law is strictly prohibited.
SAW Components
SAW GPS + GLONASS Filter
Series/type:
Ordering code:
B9877
B39162B9877P810
Date:
Version:
June 17, 2013
2.0
EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the information
contained therein without EPCOS' prior express consent is prohibited.
EPCOS AG is a TDK Group Company.
SAW Components
B9877
1585.155 MHz
SAW GPS + GLONASS Filter
Data Sheet
Application
■ Low-loss RF GPS + GLONASS filter
■ Simultaneous usage of GPS band and GLONASS
band
■ Usable passbands: 2.0 MHz for GPS and 8.34 MHz
■
■
■
■
■
■
■
for GLONASS
Unbalanced to unbalanced operation
Very low insertion attenuation
High out of band selectivity
Low amplitude ripple
Filter impedance 50 Ω
No matching network required for operation at 50 Ω
Input & Output can be exchanged, B9877 is bidirectional type.
Features
2
3
0.5
0.18
0.25
bottom view
5
4
0.385 0.385
0.4
Package size 1.1 x 0.9 x 0.4 mm3
RoHS compatible
Approximate weight 0.0012 g
Package for Surface Mount Technology (SMT)
Ni, gold-plated terminals
Electrostatic Sensitive Device (ESD)
Moisture Sensitivity Level 3 (MSL3)
1
■
■
■
■
■
■
■
side view
0.9
1.1
Pin configuration
■ 1
■ 4
■ 2,3,5
Input / Output unbalanced
Output / Input unbalanced
To be grounded
Please read cautions and warnings and
important notes at the end of this document.
2
June 17, 2013
top view
SAW Components
B9877
1585.155 MHz
SAW GPS + GLONASS Filter
Data Sheet
Characteristics of Filter
Temperature range for specification:
Terminating source impedance:
Terminating load impedance:
T = –30 ˚C to +85˚C
ZS =
50 Ω
ZL =
50 Ω
—
B9877
typ.
@ 25 ˚C
1585.66
—
—
1574.42 ... 1576.42 MHz
1597.55 ... 1605.89 MHz
min.
Center frequency
fC
Maximum insertion attenuation
1574.42 ... 1576.42 MHz
1597.55 ... 1605.89 MHz
αmax
max.
—
MHz
0.9
1.5
1.3
2.0
dB
dB
—
—
1.2
1.5
2.0
2.0
VSWR ( Output)
1574.42 ... 1576.42 MHz
1597.55 ... 1605.89 MHz
—
—
1.2
1.5
2.0
2.0
Group delay ripple1)
1597.55 ... 1605.89 MHz
—
4
10
ns
40
44
40
43
44
46
46
42
40
20
43
55
44
46
49
50
49
50
48
30
—
—
—
—
—
—
—
—
—
—
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
VSWR (Input)
α
Attenuation
1.0
1427.0
1501.0
1710.0
1850.0
1920.0
2110.0
2401.0
2500.0
4900.0
1)
...
...
...
...
...
...
...
...
...
...
960.0
1453.0
1525.0
1785.0
1910.0
1980.0
2170.0
2483.0
2570.0
5850.0
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
Measured with aperture 2 MHz.
Please read cautions and warnings and
important notes at the end of this document.
3
June 17, 2013
SAW Components
B9877
1585.155 MHz
SAW GPS + GLONASS Filter
Data Sheet
Maximum ratings of Filter
Operable temperature range
Storage temperature range
DC voltage
ESD voltage
Input power at
915 MHz
1453 MHz
1710 MHz
1)
2)
T
Tstg
VDC
VESD
PIN
PIN
PIN
–30/+85
–40/+85
0
501)
232)
15
15
˚C
˚C
V
V
dBm
dBm
dBm
machine model
source/load impedance 50Ω/50Ω
1/8 duty cycle
cw
cw
acc. to JESD22-A115B (MM - Machine Model), 10 negative & 10 positive pulses
>5000 h at Ta = 50˚C .
Please read cautions and warnings and
important notes at the end of this document.
4
June 17, 2013
SAW Components
B9877
1585.155 MHz
SAW GPS + GLONASS Filter
Data Sheet
Transfer function (passband)
Transfer function (wideband)
Please read cautions and warnings and
important notes at the end of this document.
5
June 17, 2013
SAW Components
B9877
1585.155 MHz
SAW GPS + GLONASS Filter
Data Sheet
Smith chart / VSWR
Input (pin1)
Output (pin4)
Please read cautions and warnings and
important notes at the end of this document.
6
June 17, 2013
SAW Components
B9877
1585.155 MHz
SAW GPS + GLONASS Filter
Data Sheet
Type
B9877
Ordering code
B39162B9877P810
Marking and package
C61157-A8-A30
Packaging
F61074-V8255-Z000
Date codes
L_1126
S-parameters
B9877_NB.s2p, B9877_WB.s2p
see file header for port/pin assignment table
Soldering profile
S_6001
RoHS compatible
RoHS-compatible means that products are compatible with the
requirements according to Art. 4 (substance restrictions) of Directive 2011/65/EU of the European Parliament and of the
Council of June 8th, 2011, on the restriction of the use of certain hazardous substances in electrical and electronic equipment ("Directive") with due regard to the application of exemptions as per Annex III of the Directive in certain cases.
Moldability
Before using in overmolding environment, please contact your
EPCOS sales office.
Matching coils
See Inductor pdf-catalog
http://www.tdk.co.jp/tefe02/coil.htm#aname1
and Data Library for circuit simulation
http://www.tdk.co.jp/etvcl/index.htm
For further information please contact your local EPCOS sales office or visit our webpage at
www.epcos.com .
Published by EPCOS AG
Systems, Acoustics, Waves Business Group
P.O. Box 80 17 09, 81617 Munich, GERMANY
EPCOS AG 2013. This brochure replaces the previous edition.
For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or
the international Representatives.
Due to technical requirements components may contain dangerous substances. For information on
the type in question please also contact one of our Sales Offices.
Please read cautions and warnings and
important notes at the end of this document.
7
June 17, 2013
Important notes
The following applies to all products named in this publication:
1.
2.
3.
4.
5.
6.
7.
Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar
with them than the customers themselves. For these reasons, it is always ultimately
incumbent on the customer to check and decide whether an EPCOS product with the
properties described in the product specification is suitable for use in a particular customer
application.
We also point out that in individual cases, a malfunction of electronic components or
failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in
which the malfunction or failure of an electronic component could endanger human life or
health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by
means of suitable design of the customer application or other action taken by the customer
(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained
by third parties in the event of malfunction or failure of an electronic component.
The warnings, cautions and product-specific notes must be observed.
In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more
detailed questions, please contact our sales offices.
We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be
available. The aforementioned does not apply in the case of individual agreements deviating
from the foregoing for customer-specific products.
Unless otherwise agreed in individual contracts, all orders are subject to the current
version of the “General Terms of Delivery for Products and Services in the Electrical
Industry” published by the German Electrical and Electronics Industry Association
(ZVEI).
The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CeraLink, CSMP, CSSP, CTVS,
DeltaCap, DigiSiMic, DSSP, FilterCap, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC,
MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL,
SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap
are trademarks registered or pending in Europe and in other countries. Further information
will be found on the Internet at www.epcos.com/trademarks.
8
June 17, 2013