B39182B4167U510

RF Filters for Cellular Phones Series/Type: B4167 The following products presented in this data sheet are being withdrawn. Ordering Code Substitute Product Date of Withdrawal B39182B4167U510 B39182B4142U410 2009-04-03 Deadline Last Orders 2009-07-15 Last Shipments 2009-10-15 For further information please contact your nearest EPCOS sales office, which will also support you in selecting a suitable substitute. The addresses of our worldwide sales network are presented at www.epcos.com/sales. SAW Components B4167 1842,5 MHz Low-Loss Filter for Mobile Communication Data Sheet Ceramic package DCC6D Features ● Low-loss RF filter for mobile telephone PCN systems, receive path Low amplitude ripple Usable passband 75 MHz Unbalanced to balanced operation Impedance transformation from 50Ω to 200Ω Package for Surface Mounted Technology (SMT) ● Ceramic SMD package ● ● ● ● ● Terminals ● Ni, gold-plated Dimensions in mm, approx. weight 0,037 g Pin configuration 2 4, 6 1, 3 1, 3, 5 Input, unbalanced Output, balanced Input ground To be grounded Type Ordering code B4167 B39182-B4167-U510 Marking and Package according to C61157-A7-A68 Packing according to F61074-V8089-Z000 Electrostatic Sensitive Device (ESD) Maximum ratings T Tstg VDC – 20 / + 75 – 40 / + 85 5 PIN 11 dBm 1805 ... 1880 MHz PIN 11 dBm elsewhere PIN 0 dBm Operable temperature range Storage temperature range DC voltage Input power max. 1710 ... 1785 MHz 2 °C °C V source/load impedance 50/200 Ω peak power of GSM signal, duty cycle 2 : 8 Dec 06, 2000 SAW Components B4167 1842,5 MHz Low-Loss Filter for Mobile Communication Data Sheet Characteristics T = +25 ± 2 °C ZS = 50Ω (unbalanced) ZL = 200Ω || 22 nH (balanced) Operating Temperature Range: Terminating source impedance: Terminating load impedance: fC Center frequency min. typ. max. — 1842,5 — — 2,0 3,5 dB dB MHz αmax Maximum insertion attenuation 1805,0 ... 1880,0 MHz Amplitude ripple (p-p) 1805,0 ... 1880,0 MHz — 0,9 2,0 1805,0 ...1880,0 MHz — 1,8 2,3 1805,0 ...1880,0 MHz — 1,8 2,3 Output amplitude balance (|S31/S21|) 1805,0 ...1880,0 MHz -1,5 -1,1 / +0,6 1,5 dB Output phase balance (φ(S31)−φ(S21)+180°) 1805,0 ...1880,0 MHz -12 +/- 6 12 ° 40 30 25 12 12 18 20 25 20 50 40 28 18 17 22 26 35 32 — — — — — — — — — dB dB dB dB dB dB dB dB dB ∆α Input VSWR Output VSWR α Attenuation 0,0 1000,0 1550,0 1705,0 1920,0 1980,0 2010,0 2500,0 3840,0 ... 1000,0 ... 1550,0 ... 1705,0 ... 1785,0 ... 1980,0 ... 2010,0 ... 2500,0 ... 3840,0 ... 6000,0 MHz MHz MHz MHz MHz MHz MHz MHz MHz 3 Dec 06, 2000 SAW Components B4167 1842,5 MHz Low-Loss Filter for Mobile Communication Data Sheet Characteristics T = -10 to +80°C ZS = 50Ω (unbalanced) ZL = 200Ω (balanced) || 22 nH Operating Temperature Range: Terminating source impedance: Terminating load impedance: min. typ. max. — 1842,5 — — 2,5 4,0 dB MHz — 1,4 2,5 dB 1805,0 ...1880,0 MHz — 1,8 2,4 1805,0 ...1880,0 MHz — 1,8 2,4 Output amplitude balance (|S31/S21|) 1805,0 ...1880,0 MHz -1,5 -1,1 / +0,6 1,5 dB Output phase balance (φ(S31)−φ(S21)+180°) 1805,0 ...1880,0 MHz -15 +/- 6 15 ° 40 30 25 10 10 18 20 25 20 50 40 28 15 17 22 26 35 32 — — — — — — — — — dB dB dB dB dB dB dB dB dB Center frequency fC Maximum insertion attenuation 1805,0 ... 1880,0 αmax Amplitude ripple (p-p) 1805,0 ... 1880,0 MHz MHz ∆α Input VSWR Output VSWR α Attenuation 0,0 1000,0 1550,0 1705,0 1920,0 1980,0 2010,0 2500,0 3840,0 ... 1000,0 ... 1550,0 ... 1705,0 ... 1785,0 ... 1980,0 ... 2010,0 ... 2500,0 ... 3840,0 ... 6000,0 MHz MHz MHz MHz MHz MHz MHz MHz MHz 4 Dec 06, 2000 SAW Components B4167 1842,5 MHz Low-Loss Filter for Mobile Communication Data Sheet Transfer function Transfer function (wide band) 5 Dec 06, 2000 SAW Components B4167 1842,5 MHz Low-Loss Filter for Mobile Communication Data Sheet Published by EPCOS AG Surface Acoustic Wave Components Division, OFW E MF P.O. Box 80 17 09, D-81617 München  EPCOS AG 1999. All Rights Reserved. As far as patents or other rights of third parties are concerned, liability is only assumed for components per se, not for applications, processes and circuits implemented within components or assemblies. The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. For questions on technology, prices and delivery please contact the sales offices of EPCOS AG or the international representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our sales offices. 6 Dec 06, 2000