B39242B8328P810

SAW Components BAW Bluetooth/WLAN Filter Series/type: Ordering code: B8328 B39242B8328P810 Date: Version: December 01, 2014 2.1  EPCOS AG 2014. Reproduction, publication and dissemination of this data sheet, enclosures hereto and the information contained therein without EPCOS’ prior express consent is prohibited. SAW Components B8328 BAW Bluetooth/WLAN Filter 2442.0 MHz Datasheet Application ■ Low-loss BAW RF single filter for Bluetooth/WLAN Features 2 3 1 Package size 1.4 x 1.1 mm2 Package height 0.45 mm max RoHS compatible Approximate weight 0.0012 g Package for Surface Mount Technology (SMT) Ni, gold-plated terminals Electrostatic Sensitive Device (ESD) Moisture Sensitivity Level 3 (MSL 3) 0.325 ■ ■ ■ ■ ■ ■ ■ ■ 0.25 0.575 with LTE Band 7 / Band 40 / Band 41 coexistence Usable passband 79.0 MHz Unbalanced to unbalanced operation Excellent insertion loss High out of band selectivity Filter impedance 50 Ω Excellent B7 attenuation Superior 2nd harmonic suppression bottom view 5 0.5 4 0.5 0.45 max. ■ ■ ■ ■ ■ ■ ■ 1.4 4 1 1.1 5 2 Pin configuration ■ 1 ■ 4 ■ 2,3,5 Input (unbalanced) Output (unbalanced) To be grounded Please read cautions and warnings and important notes at the end of this document. 2 December 01, 2014 side view 3 top view SAW Components B8328 BAW Bluetooth/WLAN Filter 2442.0 MHz Datasheet Characteristics of Filter Temperature range for specification: Terminating source impedance: Terminating load impedance: T = –20 ˚C to +85 ˚C ZS = 50 Ω shunt coil 6.8 nH ZL = 50 Ω shunt coil 6.8 nH Characteristics min. Center frequency fC Maximum insertion attenuation - WLAN1) αmax 2403.1 ... 2420.9 MHz (channel 1)1) 2408.1 ... 2425.9 MHz (channel 2)1) 2413.1 ... 2470.9 MHz (channel 3-11)1) 2458.1 ... 2475.9 MHz (channel 12)1) 2463.1 ... 2480.9 MHz (channel 13)1) Maximum insertion attenuation - BT2) 2401.5 ... 2480.5 MHz VSWR (Input and Output) 2403.1 ... 2475.9 2463.1 ... 2480.9 2) 3) 4) MHz 1.4 1.25 1.1 1.3 1.65 2.1 1.8 1.7 2.2 2.9 dB dB dB dB dB 1.32) 2.02) dB 1.7 1.85 2.4 α 34 35 34 40 40 434) 42 40 40 18 2nd Harmonics CW tone at input, 2442 MHz, 22 dBm 1) max. αmax MHz MHz Attenuation 100.0...1805.0MHz 1805.0...2170.0MHz 2300.0...2360.0MHz3) 2360.0...2365.0MHz3) 2365.0...2370.0MHz3) 2500.0...2505.0MHz3) 2505.0...2570.0MHz3) 2570.0...2620.0MHz3) 2620.0...2690.0MHz3) 4800.0...5805.0MHz B8328 typ. @ 25 ˚C 2442.0 37 38 41 46 48 62 49 45 45 31 dB dB dB dB dB dB dB dB dB dB -63 dBc Averaged values within each WiFi channel width of 17.8 MHz Averaged values over whole passband due to frequency hopping in Bluetooth mode Averaged value of linear S-parameter over 5 MHz +25˚C to +85˚C Please read cautions and warnings and important notes at the end of this document. 3 December 01, 2014 SAW Components B8328 BAW Bluetooth/WLAN Filter 2442.0 MHz Datasheet Maximum ratings Operable temperature range Storage temperature range DC voltage ESD voltage T Tstg VDC VESD Input power at PIN1 –30/+85 –40/+90 51) 502) 3003) 6004) 26 channel 1 to channel 13 ˚C ˚C V V V V dBm Machine Model Human Body Model Charged Device Model 20M MHz OFDM signal, 65˚C, 5000 hr 1) 168h Damp Heat Steady State acc. to IEC60068-2-67 Cy 2) acc. to JESD22-A115B (MM - Machine Model), 10 negative and 10 positive pulses 3) acc. to JESD22-A114F (HBM - Human Body Model), 1 negative and 1 positive pulses 4) acc. to JESD22-C101C (CDM - Field Induced Charged Device Model), 3 negative and 3 positive pulses Matching network ■ Lin = 6.8 nH ■ Lout = 6.8 nH ■ Recommendation to use TDK MLG0603 P-series Input Port 1 Antenna Port 4 Lin Please read cautions and warnings and important notes at the end of this document. Lout 4 December 01, 2014 SAW Components B8328 BAW Bluetooth/WLAN Filter 2442.0 MHz Datasheet Transfer function Transfer function Please read cautions and warnings and important notes at the end of this document. 5 December 01, 2014 SAW Components B8328 BAW Bluetooth/WLAN Filter 2442.0 MHz Datasheet S11VSWR S22VSWR Please read cautions and warnings and important notes at the end of this document. 6 December 01, 2014 SAW Components B8328 BAW Bluetooth/WLAN Filter 2442.0 MHz Datasheet References Type B8328 Ordering code B39242B8328P810 Marking and package C61157-A8-A116 Packaging F61074-V8237-Z000 Date codes L_1126 S-parameters B8328_NB.s2p, B8328_WB.s2p See file header for port/pin assignment table. Soldering profile S_6001 RoHS compatible RoHS-compatible means that products are compatible with the requirements according to Art. 4 (substance restrictions) of Directive 2011/65/EU of the European Parliament and of the Council of June 8th, 2011, on the restriction of the use of certain hazardous substances in electrical and electronic equipment ("Directive") with due regard to the application of exemptions as per Annex III of the Directive in certain cases. Moldability Before using in overmolding environment, please contact your EPCOS sales office. Matching coils See Inductor pdf-catalog http://www.tdk.co.jp/tefe02/coil.htm#aname1 and Data Library for circuit simulation http://www.tdk.co.jp/etvcl/index.htm For further information please contact your local EPCOS sales office or visit our webpage at www.epcos.com . Published by EPCOS AG Systems, Acoustics, Waves Business Group P.O. Box 80 17 09, 81617 Munich, GERMANY  EPCOS AG 2014. This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices. Please read cautions and warnings and important notes at the end of this document. 7 December 01, 2014 Important notes The following applies to all products named in this publication: 1. 2. 3. 4. 5. 6. 7. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. The warnings, cautions and product-specific notes must be observed. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms of Delivery for Products and Services in the Electrical Industry” published by the German Electrical and Electronics Industry Association (ZVEI). The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CeraLink, CeraPlas, CSMP, CSSP, CTVS, DeltaCap, DigiSiMic, DSSP, FilterCap, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, TFAP, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks. 8 December 01, 2014