SAW multimedia filters
Series/Type:
M3953M
The following products presented in this data sheet are being withdrawn.
Ordering Code
Substitute Product
B39458M3953M100
Date of Withdrawal
2011-01-14
Deadline Last
Orders
2011-09-30
Last Shipments
2012-09-30
For further information please contact your nearest EPCOS sales office, which will also support you in selecting a
suitable substitute. The addresses of our worldwide sales network are presented at www.epcos.com/sales.
EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the information
contained therein without EPCOS' prior express consent is prohibited.
EPCOS AG is a TDK Group Company.
SAW Components
M 3953 M
SAW IF filter
45.75 MHz
Data Sheet
Application
■ Standard: M/N
■ TV IF filter with Nyquist slope and sound suppres-
sion
■ High color carrier level
■ Constant group delay
Features
■
■
■
■
Plastic package SIP5K
Approximate weight 1.0 g
RoHS compatible
Tinned CuFe alloy terminals
Pin configuration
■
■
■
■
■
1
2
2
3
4
Input
Input - ground
Chip carrier - ground
Output
Output
Please read cautions and warnings and
important notes at the end of this document.
2
January 19, 2009
SAW Components
M 3953 M
SAW IF filter
45.75 MHz
Data Sheet
Characteristics
Reference temperature:
Terminating source impedance:
Terminating load impedance:
TA = 25 (45) ˚C
ZS = 50 Ω
ZL = 2 kΩ || 3 pF
min.
typ.
@ 25 ˚C
max.
11.2
12.7
14.2
dB
MHz
MHz
MHz
MHz
MHz
MHz
5.2
–0.5
0.2
25.0
48.0
46.0
6.2
0.2
0.9
37.0
63.0
57.0
7.2
0.9
1.6
—
—
—
dB
dB
dB
dB
dB
dB
MHz
40.0
45.0
—
dB
MHz
37.0
43.0
—
dB
42.0
52.0
—
dB
50.0
56.0
—
dB
—
40
—
ns
—
—
kΩ || pF
kΩ || pF
—
ppm/K
Insertion attenuation
α
Reference level for
44.06 (44.00) MHz
the following data
Relative attenuation
Picture carrier
45.81 (45.75)
Color carrier
42.23 (42.17)
41.98 (41.92)
Sound carrier
41.31 (41.25)
Adj. picture carrier
39.81 (39.75)
Adj. sound carrier
47.31 (47.25)
Lower sidelobe
35.06 ...39.81(35.00 ... 39.75)
Upper sidelobe
47.31 ...55.06(47.25 ... 55.00)
αrel
Reflected wave signal suppression
1.3 µs ... 6.0 µs after main pulse
(test pulse 250 ns,
carrier frequency 44.06 MHz)
Feedthrough signal suppression
1.3 µs ... 1.2 µs before main pulse
(test pulse 250 ns,
carrier frequency 44.06 MHz)
Group delay ripple (p-p)
∆τ
Impedance at 44.06 MHz
Input: ZIN = RIN || CIN
Output: ZOUT = ROUT || COUT
Temperature coefficient of frequency
Please read cautions and warnings and
important notes at the end of this document.
—
—
TCf
—
3
1.1 || 15.6
1.0 || 4.0
–72
January 19, 2009
SAW Components
M 3953 M
SAW IF filter
45.75 MHz
Data Sheet
Maximum ratings
Operable temperature range T
Storage temperature range Tstg
DC voltage
AC voltage
VDC
Vpp
Please read cautions and warnings and
important notes at the end of this document.
–25 / +65 ˚C
–40 / +85 ˚C
5
V
10
V
4
between any terminals
January 19, 2009
SAW Components
M 3953 M
SAW IF filter
45.75 MHz
Data Sheet
Frequency response
Please read cautions and warnings and
important notes at the end of this document.
5
January 19, 2009
SAW Components
M 3953 M
SAW IF filter
45.75 MHz
Data Sheet
Frequency response
Time domain response
Please read cautions and warnings and
important notes at the end of this document.
6
January 19, 2009
SAW Components
M 3953 M
SAW IF filter
45.75 MHz
Data Sheet
References
Type
M 3953 M
Ordering code
B39458-M3953-M100
Marking and package
C61157-A1-A15
Packaging
F61074-V8067-Z000
Date codes
L_1126
S-parameters
Soldering profile
S_6001
RoHS compatible
defined as compatible with the following documents:
"DIRECTIVE 2002/95/EC OF THE EUROPEAN PARLIAMENT
AND OF THE COUNCIL of 27 January 2003 on the restriction
of the use of certain hazardous substances in electrical and
electronic equipment. 2005/618/EC from April 18th, 2005,
amending Directive 2002/95/EC of the European Parliament
and of the Council for the purposes of establishing the maximum concentration values for certain hazardous substances in
electrical and electronic equipment."
For further information please contact your local EPCOS sales office or visit our webpage at
www.epcos.com .
Published by EPCOS AG
Surface Acoustic Wave Components Division
P.O. Box 80 17 09, 81617 Munich, GERMANY
EPCOS AG 2009. This brochure replaces the previous edition.
For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or
the international Representatives.
Due to technical requirements components may contain dangerous substances. For information on
the type in question please also contact one of our Sales Offices.
Please read cautions and warnings and
important notes at the end of this document.
7
January 19, 2009
Important notes
The following applies to all products named in this publication:
1.
2.
3.
4.
5.
6.
7.
Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar
with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties
described in the product specification is suitable for use in a particular customer application.
We also point out that in individual cases, a malfunction of electronic components or
failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in
which the malfunction or failure of an electronic component could endanger human life or
health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by
means of suitable design of the customer application or other action taken by the customer
(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained
by third parties in the event of malfunction or failure of an electronic component.
The warnings, cautions and product-specific notes must be observed.
In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more
detailed questions, please contact our sales offices.
We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from
the foregoing for customer-specific products.
Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms of Delivery for Products and Services in the Electrical
Industry” published by the German Electrical and Electronics Industry Association
(ZVEI).
The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSSP, CTVS, DSSP, MiniBlue, MKK,
MLSC, MotorCap, PCC, PhaseCap, PhaseMod, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the
Internet at www.epcos.com/trademarks.
8
January 19, 2009