B39652B8380L210

Data sheet BAW filter 6.5 GHz Wi-Fi 6E UNII5-8 Part number: B8380 Ordering code: B39652B8380L210 Date: December 06, 2022 Version: 2.2 Qualcomm products mentioned herein are products of Qualcomm Technologies, Inc. and/or its subsidiaries. RF360 Europe GmbH Anzinger Straße 13 81671 Munich, Germany © 2022 Qualcomm Technologies, Inc. and/or its subsidiaries. All rights reserved BAW filter B8380 Data sheet These materials, including the information contained herein, may be used only for informational purposes by the customer. Qualcomm Technologies, Inc. and/or its subsidiaries assume no responsibility for errors or omissions in these materials or the information contained herein and reserve the right to make changes to the product(s) or information contained herein without notice. The materials and information are provided on an AS IS basis, without warranty, either expressed or implied, with respect to the materials, or any output or results based on the use, application, or evaluation of such materials, including without limitation, with respect to the non-infringement of trademarks, patents, copyrights or any other intellectual property rights or other rights of third parties. No use of this documentation or any information contained herein grants any license, whether express, implied, by estoppel or otherwise, to any intellectual property rights, including, without limitation, to any patents owned by QUALCOMM Incorporated or any of its subsidiaries. Not to be used, copied, reproduced, or modified in whole or in part, nor its contents revealed in any manner to others without the express written permission of RF360 Europe GmbH. Qualcomm is a trademark or registered trademark of Qualcomm Incorporated. Other product and brand names may be trademarks or registered trademarks of their respective owners. This technical data may be subject to U.S. and international export, re-export, or transfer (“export”) laws. Diversion contrary to U.S. and international law is strictly prohibited. Please read Cautions and warnings and Important notes at the end of this document. Page 2 of 24 December 06, 2022 May contain US and international export controlled information. BAW filter B8380 Data sheet Table of contents 1 Application........................................................................................................................................ 4 2 Features........................................................................................................................................... 4 3 Package........................................................................................................................................... 5 4 Pin configuration............................................................................................................................... 5 5 Matching circuit................................................................................................................................. 6 6 Characteristics.................................................................................................................................. 7 7 Maximum ratings.............................................................................................................................. 9 8 Transmission coefficient................................................................................................................. 10 9 Transmission coefficient (WLAN)....................................................................................................11 10 Reflection coefficients...................................................................................................................14 11 Packing material........................................................................................................................... 15 12 Marking......................................................................................................................................... 19 13 Soldering profile............................................................................................................................ 20 14 Annotations.................................................................................................................................. 21 15 Cautions and warnings.................................................................................................................22 16 ESD protection of acoustic devices..............................................................................................23 17 Important notes............................................................................................................................. 24 Please read Cautions and warnings and Important notes at the end of this document. Page 3 of 24 December 06, 2022 May contain US and international export controlled information. BAW filter B8380 Data sheet 1      2         Application Low-loss BAW RF 6.5GHz coexistence filter for Wi-Fi 6E (UNII5-8) Frequency range 5945-7125MHz/ Pass band 1180MHz Coexistence with UNII1-3 Excellent Power Handling Small footprint Features Package size 1.8±0.05 mm × 1.4±0.05 mm Package height 0.64 mm (max.) Approximate weight 3 mg RoHS compatible Package for Surface Mount Technology (SMT) Ni/Au-plated terminals Electrostatic Sensitive Device (ESD) Moisture Sensitivity Level 3 (MSL3) Figure 1: Picture of component with example of product marking. Please read Cautions and warnings and Important notes at the end of this document. Page 4 of 24 December 06, 2022 May contain US and international export controlled information. BAW filter B8380 Data sheet 3 Package 4 Pin configuration  3 Output  7 Input  1, 2, 4, 5, Ground 6, 8 Figure 2: Drawing of package with package height A = 0.64 mm (max.). See Sec. Package information (p. 22). Please read Cautions and warnings and Important notes at the end of this document. Page 5 of 24 December 06, 2022 May contain US and international export controlled information. BAW filter B8380 Data sheet 5 Matching circuit Figure 3: Schematic of matching circuit. No external matching components required. Please read Cautions and warnings and Important notes at the end of this document. Page 6 of 24 December 06, 2022 May contain US and international export controlled information. BAW filter B8380 Data sheet 6 Characteristics Temperature range for specification Input terminating impedance Output terminating impedance TSPEC ZIN ZOUT = −30 °C ... +85 °C = 50 Ω = 50 Ω Characteristics min. typ. max. for TSPEC @ +25 °C for TSPEC Maximum insertion attenuation αmax 5945... 6105 MHz — 3.2 4.5 dB 6105... 7125 MHz — 2.1 3.0 dB 5945... 7125 MHz αWLAN1) — 2.9 3.8 dB 5945... 7125 MHz αWLAN 2) — 2.5 3.0 dB 5945... 7125 MHz αWLAN 3) — 2.4 3.0 dB Insertion attenuation – WLAN Amplitude ripple (p-p) Δα 5945... 6105 MHz — 0.8 2.5 dB 6105... 7125 MHz — 0.4 1.5 dB Maximum VSWR @ input port @ output port VSWRmax 5945... 6105 MHz — 1.7 2.5 6105... 7125 MHz — 1.4 2.2 5945... 6105 MHz — 1.7 2.5 6105... 7125 MHz — 1.4 2.2 Minimum attenuation αmin 10... 2000 MHz 40 44 — dB 2000... 2100 MHz 35 40 — dB 2100... 2400 MHz 40 44 — dB 2400... 2570 MHz 40 43 — dB 2570... 3400 MHz 35 43 — dB 3400... 3870 MHz 35 43 — dB 3870... 4400 MHz 35 46 — dB 4400... 5170 MHz 35 40 — dB 5170... 5725 MHz 40 46 — dB 5725... 5825 MHz 30 45 — dB 11890... 14250 MHz — 37 — dB 17835... 21375 MHz — 41 — dB 30 46 — dB 40 47 — dB 40 48 — dB Wi-Fi 6 20MHz 5725... 5835 5170... 5825 2) αWLAN 3) MHz Wi-Fi 6 160MHz 1) αWLAN 2) MHz Wi-Fi 6 80MHz 5170... 5825 αWLAN 1) MHz Average over each WLAN channel with band width of 20 MHz. Average over each WLAN channel with band width of 80 MHz. Please read Cautions and warnings and Important notes at the end of this document. Page 7 of 24 December 06, 2022 May contain US and international export controlled information. BAW filter B8380 Data sheet 3) Average over each WLAN channel with band width of 160 MHz. Please read Cautions and warnings and Important notes at the end of this document. Page 8 of 24 December 06, 2022 May contain US and international export controlled information. BAW filter B8380 Data sheet 7 Maximum ratings Operable temperature TOP = −40 °C ... +95 °C Storage temperature TSTG1) = −40 °C ... +95 °C DC voltage |VDC|2) = 0 V (max.) ESD voltage Input power VESD3) = 375 V (max.) Human body model. VESD Machine model. 4) = 100 V (max.) PIN @ input port: 5945 ... 7125 MHz 28 dBm 160 MHz WLAN signal 70% duty cycle for 20000 h @ 55 °C. Source and load impedance 50Ω.5) @ input port: other frequency ranges 10 dBm Continuous wave for 10000 h @ 55 °C. Source and load impedance 50Ω. 1) 2) 3) 4) 5) Not valid for packaging material. Storage temperature for packaging material is −25 °C to +40 °C. In case of applied DC voltage blocking capacitors are mandatory. According to JESD22-A114F (HBM – Human Body Model), 1 negative & 1 positive pulse. According to JESD22-A115B (MM – Machine Model), 10 negative & 10 positive pulses. Expected lifetime according to accelerated power durability tests, and wear out models. Please read Cautions and warnings and Important notes at the end of this document. Page 9 of 24 December 06, 2022 May contain US and international export controlled information. BAW filter B8380 Data sheet 8 Transmission coefficient Figure 4: Attenuation. Please read Cautions and warnings and Important notes at the end of this document. Page 10 of 24 December 06, 2022 May contain US and international export controlled information. BAW filter B8380 Data sheet 9 Transmission coefficient (WLAN) Figure 5: Attenuation (WLAN) (integration window = 160 MHz). Please read Cautions and warnings and Important notes at the end of this document. Page 11 of 24 December 06, 2022 May contain US and international export controlled information. BAW filter B8380 Data sheet Figure 6: Attenuation (WLAN) (integration window = 20 MHz). Please read Cautions and warnings and Important notes at the end of this document. Page 12 of 24 December 06, 2022 May contain US and international export controlled information. BAW filter B8380 Data sheet Figure 7: Attenuation (WLAN) (integration window = 80 MHz). Please read Cautions and warnings and Important notes at the end of this document. Page 13 of 24 December 06, 2022 May contain US and international export controlled information. BAW filter B8380 Data sheet 10 Reflection coefficients Figure 8: Reflection coefficient at input port. Figure 9: Reflection coefficient at output port. Please read Cautions and warnings and Important notes at the end of this document. Page 14 of 24 December 06, 2022 May contain US and international export controlled information. BAW filter B8380 Data sheet 11 Packing material 11.1 Tape Figure 10: Drawing of tape (first-angle projection) for illustration only and not to scale. The valid tape dimensions are listed in Table 1. A0 1.6±0.05 mm B0 2.0±0.05 mm E2 6.25 mm (min.) P1 4.0±0.1 mm F 3.5±0.05 mm D0 1.5+0.1/−0 mm G 0.75 mm (min.) D1 0.8+0.1/−0 mm K0 0.73±0.05 mm E1 1.75±0.1 mm P0 4.0±0.1 mm P2 2.0±0.05 mm T 0.25±0.03 mm W 8.0+0.3/−0.1 mm Table 1: Tape dimensions. Please read Cautions and warnings and Important notes at the end of this document. Page 15 of 24 December 06, 2022 May contain US and international export controlled information. BAW filter B8380 Data sheet 11.2 Reel with diameter of 180 mm Figure 11: Drawing of reel (first-angle projection) with diameter of 180 mm. Figure 12: Drawing of moisture barrier bag (MBB) for reel with diameter of 180 mm. Please read Cautions and warnings and Important notes at the end of this document. Page 16 of 24 December 06, 2022 May contain US and international export controlled information. BAW filter B8380 Data sheet Figure 13: Drawing of folding box for reel with diameter of 180 mm. 11.3 Reel with diameter of 330 mm Figure 14: Drawing of reel (first-angle projection) with diameter of 330 mm. Please read Cautions and warnings and Important notes at the end of this document. Page 17 of 24 December 06, 2022 May contain US and international export controlled information. BAW filter B8380 Data sheet Figure 15: Drawing of moisture barrier bag (MBB) for reel with diameter of 330 mm. Figure 16: Drawing of folding box for reel with diameter of 330 mm. Please read Cautions and warnings and Important notes at the end of this document. Page 18 of 24 December 06, 2022 May contain US and international export controlled information. BAW filter B8380 Data sheet 12 Marking Products are marked with product type number and lot number encoded according to Table 2:  Type number: The 4 digit type number of the ordering code, is encoded by a special BASE32 code into a 3 digit marking. e.g., B3xxxxB1234xxxx, Example of decoding type number marking on device 16J => 1 x 322 + 6 x 321 + 18 (=J) x 320 = The BASE32 code for product type B8380 is 85W. in decimal code. 1234 1234  Lot number: The last 5 digits of the lot number, e.g., are encoded based on a special BASE47 code into a 3 digit marking. Example of decoding lot number marking on device 5UY 5 x 472 + 27 (=U) x 471 + 31 (=Y) x 470 Adopted BASE32 code for type number Decimal Base32 Decimal Base32 value code value code 0 0 16 G 1 1 17 H 2 2 18 J 3 3 19 K 4 4 20 M 5 5 21 N 6 6 22 P 7 7 23 Q 8 8 24 R 9 9 25 S 10 A 26 T 11 B 27 V 12 C 28 W 13 D 29 X 14 E 30 Y 15 F 31 Z => = 12345, in decimal code. 12345 12345 Adopted BASE47 code for lot number Decimal Base47 Decimal Base47 value code value code 0 0 24 R 1 1 25 S 2 2 26 T 3 3 27 U 4 4 28 V 5 5 29 W 6 6 30 X 7 7 31 Y 8 8 32 Z 9 9 33 b 10 A 34 d 11 B 35 f 12 C 36 h 13 D 37 n 14 E 38 r 15 F 39 t 16 G 40 v 17 H 41 \ 18 J 42 ? 19 K 43 { 20 L 44 } 21 M 45 < 22 N 46 > 23 P Table 2: Lists for encoding and decoding of marking. Please read Cautions and warnings and Important notes at the end of this document. Page 19 of 24 December 06, 2022 May contain US and international export controlled information. BAW filter B8380 Data sheet 13 Soldering profile The recommended soldering process is in accordance with IEC 60068-2-58 – 3rd edit and IPC/JEDEC J-STD-020B. ramp rate ≤ 3 K/s preheat 125 °C to 220 °C, 150 s to 210 s, 0.4 K/s to 1.0 K/s T > 220 °C 30 s to 70 s T > 230 °C min. 10 s T > 245 °C max. 20 s T ≥ 255 °C – peak temperature Tpeak 250 °C +0/-5 °C wetting temperature Tmin 230 °C +5/-0 °C for 10 s ± 1 s cooling rate ≤ 3 K/s soldering temperature T measured at solder pads Table 3: Characteristics of recommended soldering profile for lead-free solder (Sn95.5Ag3.8Cu0.7). Figure 17: Recommended reflow profile for convection and infrared soldering – lead-free solder. Please read Cautions and warnings and Important notes at the end of this document. Page 20 of 24 December 06, 2022 May contain US and international export controlled information. BAW filter B8380 Data sheet 14 Annotations 14.1 RoHS compatibility ROHS-compatible means that products are compatible with the requirements according to Art. 4 (substance restrictions) of Directive 2011/65/EU of the European Parliament and of the Council of June 8th, 2011, on the restriction of the use of certain hazardous substances in electrical and electronic equipment ("Directive") with due regard to the application of exemptions as per Annex III of the Directive in certain cases. 14.2 Scattering parameters (S-parameters) The pin/port assignment is available in the headers of the S-parameter files. Please contact your local RF360 sales office. 14.3 Ordering codes, product IDs, labels, and packing units Ordering code Product ID RF360 label Packing unit B39652B8380L210 B39652-B8380-L210-W05 B39652B8380L210W05 5000 pcs Table 4: Ordering codes / product IDs and packing units. Please read Cautions and warnings and Important notes at the end of this document. Page 21 of 24 December 06, 2022 May contain US and international export controlled information. BAW filter B8380 Data sheet 15 Cautions and warnings 15.1 Display of ordering codes for RF360 products The ordering code for one and the same product can be represented differently in data sheets, data books, other publications and the website of RF360, or in order-related documents such as shipping notes, order confirmations and product labels. The varying representations of the ordering codes are due to different processes employed and do not affect the specifications of the respective products. Detailed information can be found on the Internet under https://rffe.qualcomm.com/. 15.2 Material information Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our sales offices. For information on recycling of tapes and reels please contact one of our sales offices. 15.3 Moldability Before using in overmolding environment, please contact your local RF360 sales office. 15.4 Package information Landing area The printed circuit board (PCB) land pattern (landing area) shown is based on RF360 internal development and empirical data and illustrated for example purposes, only. As customers' SMD assembly processes may have a plenty of variants and influence factors which are not under control or knowledge of RF360, additional careful process development on customer side is necessary and strongly recommended in order to achieve best soldering results tailored to the particular customer needs. Dimensions Unless otherwise specified all dimensions are understood using unit millimeter (mm). Projection method Unless otherwise specified first-angle projection is applied. Please read Cautions and warnings and Important notes at the end of this document. Page 22 of 24 December 06, 2022 May contain US and international export controlled information. BAW filter B8380 Data sheet 16 ESD protection of acoustic devices Acoustic devices are Electro Static Discharge sensitive devices. To reduce the probability of damages caused by ESD, special matching topologies must be applied. In general, “ESD matching” must be ensured at that electrical port, where electrostatic discharge is expected. Electrostatic discharges predominantly appear at the antenna input of RF receivers. Therefore, only the input matching of the acoustic device must be designed to short circuit or to block the ESD pulse. Below three figures show recommended “ESD matching” topologies. For wide band acoustic devices the high-pass ESD matching structure needs to be at least of 3rd order to ensure a proper matching for any impedance value of antenna and input port. The required component values must be determined from case to case. Figure 18: MLC varistor plus ESD matching. Figure 19: Suppressor diode plus ESD matching. In cases where minor ESD occur, following simplified “ESD matching” topologies can be used alternatively. Figure 20: 3rd order high-pass structure for basic ESD protection. In all three figures the shunt inductor Lp2 could be replaced by a shorted microstrip with proper length and width. If this configuration is possible depends on the operating frequency and available PCB space. Effectiveness of the applied ESD protection has to be checked according to relevant industry standards or customer specific requirements. For further information, please refer to RF360 Application report: “ESD protection for SAW filters”. This report can be found under https://rffe.qualcomm.com. Please read Cautions and warnings and Important notes at the end of this document. Page 23 of 24 December 06, 2022 May contain US and international export controlled information. BAW filter B8380 Data sheet 17 Important notes The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, RF360 Europe GmbH and its affiliates are either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an RF360 product with the properties described in the product specification is suitable for use in a particular customer application. 2. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. The warnings, cautions and product-specific notes must be observed. 4. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (https://rffe.qualcomm.com). Should you have any more detailed questions, please contact our sales offices. 5. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. Please read Cautions and warnings and Important notes at the end of this document. Page 24 of 24 December 06, 2022 May contain US and international export controlled information.