B39741B8012P810

SAW Components SAW Duplexer for Femtocell and Smallcell Band 12 (3G/LTE) Series/type: Ordering code: B8012 B39741B8012P810 Date: Version: July 09, 2014 2.0  EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. EPCOS AG is a TDK Group Company. SAW Components B8012 707.5 / 737.5 MHz SAW Duplexer DataSheet Application ■ Low-loss SAW duplexer for 3G/LTE femtocell and ■ ■ ■ ■ ■ ■ smallcell systems (Band 12) Low insertion attenuation Low amplitude ripple Usable passband 17 MHz High power durability Rx = Uplink = 699-716 MHz Tx = Downlink = 729-746 MHz Features ■ ■ ■ ■ ■ ■ ■ Package size 2.5 * 2.0 mm2 max. Package height 0.5 mm RoHS compatible Package for Surface Mount Technology (SMT) Ni, Au-plated terminals Electrostatic Sensitive Device (ESD) Moisture Sentivity Level 3 Pin configuration ■ ■ ■ ■ 3 1 6 2, 4, 5, 7, 8, 9 3 RX output TX input Antenna To be grounded 1 4,5,9 2,7,8 6 Please read cautions and warnings and important notes at the end of this document. 2 July 09, 2014 SAW Components B8012 707.5 / 737.5 MHz SAW Duplexer DataSheet Characteristics Temperature range for specification: Antenna terminating impedance: RX terminating impedance: TX terminating impedance: T = –10 ˚C to +85 ˚C ZANT= 50 Ω || 17 nH ZRX = 50 Ω ZTX = 50 Ω Characterisitcs ANT - RX min. Center frequency fC Maximum insertion attenuation 699.0 ... 714.75 MHz αmax 714.75 ... Amplitude ripple (p-p) 699.0 ... 699.0 ... 716.0 MHz max. — typ. @ 25 ˚C 707.5 — MHz — 2.3 3.0 dB — 2.4 4.5 dB — 0.9 2.0 — 1.0 3.0 dB dB % ∆α 714.75 MHz 716.0 MHz EVM1) Error Vector Magnitude @fcarrier 701.5 ... 713.5 MHz - 2.2 5.0 Input VSWR (ANT port) 699.0 ... 716.0 MHz — 1.8 2.2 Output VSWR (RX port) 699.0 ... 716.0 MHz — 2.0 2.3 45 12 5 1.5 1 5 10 45 42 45 45 45 45 45 45 58 15 23 2.5 2.3 13 19 50 48 49 50 52 54 56 54 — — — — — — — — — — — — — — — α Attenuation 100.0 693.25 694.0 694.5 716.0 721.0 722.5 729.0 746.0 758.0 777.0 788.0 869.0 1398.0 1574.0 ... 600.0 ... 694.0 ... 694.5 ... 697.75 ... 721.0 ... 722.5 ... 728.0 ... 746.0 ... 756.0 ... 768.0 ... 787.0 ... 798.0 ... 894.0 ... 1432.0 ... 1606.0 MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz Please read cautions and warnings and important notes at the end of this document. 3 July 09, 2014 dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB SAW Components B8012 707.5 / 737.5 MHz SAW Duplexer DataSheet Characterisitcs ANT - RX 1710.0 1850.0 1930.0 2110.0 2400.0 1) ... ... ... ... ... min. 1755.0 1915.0 1995.0 2170.0 2500.0 MHz MHz MHz MHz MHz 45 40 40 30 40 typ. @ 25 ˚C 53 51 50 44 50 Error Vector Magnitude (EVM) based on definition given in 3GPP TS 25.141 Please read cautions and warnings and important notes at the end of this document. 4 July 09, 2014 max. — — — — — dB dB dB dB dB SAW Components B8012 707.5 / 737.5 MHz SAW Duplexer DataSheet Characteristics Temperature range for specification: Antenna terminating impedance: RX terminating impedance: TX terminating impedance: T = –10 ˚C to +85 ˚C ZANT= 50 Ω || 17 nH ZRX = 50 Ω ZTX = 50 Ω Characterisitcs TX - ANT min. Center frequency fC max. — typ. @ 25 ˚C 737.5 — MHz — 1.8 2.5 dB — 0.6 1.3 dB % αmax Maximum insertion attenuation 729.0 ... 746.0 MHz Amplitude ripple (p-p) 729.0 ... MHz ∆α 746.0 EVM1) Error Vector Magnitude @fcarrier 731.5 ... 743.5 MHz - 2.5 4.0 Input VSWR (TX port) 729.0 ... 746.0 MHz — 1.8 2.0 Output VSWR (ANT port) 729.0 ... 746.0 MHz — 1.6 2.0 30 45 35 35 35 35 35 35 35 35 40 40 30 30 30 35 42 51 48 45 41 40 45 46 47 49 49 49 46 46 44 42 — — — — — — — — — — — — — — — — α Attenuation 10.0 699.0 777.0 788.0 824.0 869.0 1398.0 1458.0 1574.0 1710.0 1850.0 1930.0 2097.0 2110.0 2187.0 2400.0 1) ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 699.0 716.0 787.0 798.0 849.0 894.0 1432.0 1492.0 1606.0 1755.0 1915.0 1995.0 2148.0 2170.0 2238.0 2500.0 MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz Error Vector Magnitude (EVM) based on definition given in 3GPP TS 25.141 Please read cautions and warnings and important notes at the end of this document. 5 July 09, 2014 dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB SAW Components B8012 707.5 / 737.5 MHz SAW Duplexer DataSheet Characteristics Temperature range for specification: Antenna terminating impedance: RX terminating impedance: TX terminating impedance: T = –10 ˚C to +85 ˚C ZANT= 50 Ω || 17 nH ZRX = 50 Ω ZTX = 50 Ω Characteristics TX-RX min. typ. @ 25 ˚C max. 48 48 52 52 — — α Attenuation 699.0 729.0 ... ... 716.0 746.0 MHz MHz dB dB Maximum Ratings Storage temperature range DC voltage ESD voltage Input power at pin 1 729.0 ...746.0 MHz Tstg VDC VESD –40/+85 0 501) ˚C V V Pin 31 dBm Pin 10 dBm machine model, 1 pulse source and load impedance 50 Ω LTE 5 MHz downlink } average power T = 55˚C, 50.000 h elsewhere 1) According to JESD22-A115A (machine model), 1 negative and 1 positive pulses. Please read cautions and warnings and important notes at the end of this document. 6 July 09, 2014 SAW Components B8012 707.5 / 737.5 MHz SAW Duplexer DataSheet Frequency Response ANT-RX Frequency Response ANT-RX Please read cautions and warnings and important notes at the end of this document. 7 July 09, 2014 SAW Components B8012 707.5 / 737.5 MHz SAW Duplexer DataSheet Frequency Response TX-ANT Frequency Response TX-ANT Please read cautions and warnings and important notes at the end of this document. 8 July 09, 2014 SAW Components B8012 707.5 / 737.5 MHz SAW Duplexer DataSheet Frequency Response TX-RX Frequency Response TX-RX Please read cautions and warnings and important notes at the end of this document. 9 July 09, 2014 SAW Components B8012 707.5 / 737.5 MHz SAW Duplexer DataSheet S11 VSWR (RX) S22 VSWR (ANT) S33 VSWR (TX) Please read cautions and warnings and important notes at the end of this document. 10 July 09, 2014 SAW Components B8012 707.5 / 737.5 MHz SAW Duplexer DataSheet EVM RX EVM TX Please read cautions and warnings and important notes at the end of this document. 11 July 09, 2014 SAW Components B8012 707.5 / 737.5 MHz SAW Duplexer DataSheet References Type B8012 Ordering code B39741B8012P810 Marking and package C61157-A3-A27 Packaging F61074-V8232-Z000 Date codes L_1126 S-parameters B8012_NB.s3p, B8012_WB.s3p See file header for port/pin assignment table Soldering profile S_6001 RoHS compatible RoHS-compatible means that products are compatible with the requirements according to Art. 4 (substance restrictions) of Directive 2011/65/EU of the European Parliament and of the Council of June 8th, 2011, on the restriction of the use of certain hazardous substances in electrical and electronic equipment ("Directive") with due regard to the application of exemptions as per Annex III of the Directive in certain cases. Moldability Before using in overmolding environment, please contact your EPCOS sales office. Matching coils See Inductor pdf-catalog http://www.tdk.co.jp/tefe02/coil.htm#aname1 and Data Library for circuit simulation http://www.tdk.co.jp/etvcl/index.htm For further information please contact your local EPCOS sales office or visit our webpage at www.epcos.com . Published by EPCOS AG Systems, Acoustics, Waves Business Group P.O. Box 80 17 09, 81617 Munich, GERMANY  EPCOS AG 2014. This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices. Please read cautions and warnings and important notes at the end of this document. 12 July 09, 2014 Important notes The following applies to all products named in this publication: 1. 2. 3. 4. 5. 6. 7. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. The warnings, cautions and product-specific notes must be observed. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms of Delivery for Products and Services in the Electrical Industry” published by the German Electrical and Electronics Industry Association (ZVEI). The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CeraLink, CeraPlas, CSMP, CSSP, CTVS, DeltaCap, DigiSiMic, DSSP, FilterCap, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, TFAP, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks. 13 July 09, 2014