B39941B8803P810

SAW Components SAW Rx filter WCDMA Band VIII Series/Type: Ordering code: B8803 B39941-B8803-P810 Date: Version: July 25, 2013 2.0  EPCOS AG 2013. Reproduction, publication and dissemination of this data sheet, enclosures hereto and the information contained therein without EPCOS’ prior express consent is prohibited. SAW Components B8803 942.5 MHz SAW Filter Sample Data Application ■ Low-loss RF filter for mobile telephone ■ ■ ■ ■ WCDMA Band VIII system, receive path (Rx) Suitable for diversity applications Impedance 50 ohm input and output Unbalanced /unbalanced operation Usable passband 35 MHz Features Package size 1.1 x 0.9 mm2 Maximum package height 0.45 mm RoHS compatible Approx. weight 0.001g Package for Surface Mount Technology (SMT) Ni, gold-plated terminals Electrostatic Sensitive Device (ESD) Moisture Sensitive Level 3 0.25 2 3 0.5 0.18 1 bottom view 5 4 0.385 0.385 0.45 max. ■ ■ ■ ■ ■ ■ ■ ■ side view 1.1 4 1 0.9 5 2 top view 3 Pin configuration ■ 1 ■ 4 ■ 2,3,5 Input, unbalanced Output, unbalanced To be grounded Please read cautions and warnings and important notes at the end of this document. 2 1 4 2,5 3 July 25, 2013 SAW Components B8803 942.5 MHz SAW Filter Data Sheet Characteristics T = –20 ˚C to +90 ˚C ZS = 50 Ω ZL = 50 Ω Temperature range for specification: Terminating source impedance: Terminating load impedance: min. typ. @ 25˚C max. fC — 942.5 — MHz MHz αmax MHz αWCDMA 1) ∆α MHz — — 2.6 2.0 4.0 2.7 dB dB — 1.2 2.7 dB MHz EVM — 8 12 % Center frequency Maximum insertion attenuation 925.0 ... 960.0 @fCarrier 927.4 ... 957.6 Amplitude ripple (p-p) 925.0 ... 960.0 Error Vector Magnitude 2) @fCarrier 927.4 ... 957.6 Input VSWR 925.0 ... 960.0 MHz — 2.0 2.7 927.0 ... 960.0 MHz — 2.0 2.7 45 30 44 27 39 39 33 31 28 52 46 48 33 43 43 39 37 34 — — — — — — — — — Output VSWR α Attenuation @fCarrier 10.0 880.0 882.4 1045.0 1710.0 1920.0 2400.0 2775.0 4900.0 ... ... ... ... ... ... ... ... ... 880.0 915.0 912.6 6000.0 1785.0 1980.0 2500.0 2880.0 5950.0 Please read cautions and warnings and important notes at the end of this document. MHz MHz MHz αWCDMA3) MHz MHz MHz MHz MHz MHz 3 July 25, 2013 dB dB dB dB dB dB dB dB dB SAW Components B8803 942.5 MHz SAW Filter Sample Data 1) Attenuation of WCDMA signal (“Powertransferfunction”, αWCDMA) is determined by ∞ ∫∞ Sds 21 ( f )HRRC ( f – f Carrier ) 2 df fCarrier according to 3GPP TS 25.101 (e.g. for band VIII RX passband, fCarrier ranges from 927.4 MHz (lowest Rx channel) to 957.6 MHz (highest Rx channel)). HRRC(f) is the transfer function of the root-raised cosine transmit pulse shaping filter according to 3GPP TS 25.101 with the following normalization: ∞ ∫∞ HRRC ( f ) 2) 2 df = 1 Error Vector Magnitude (EVM) based on definition given in 3GPP TS 25.141. Please read cautions and warnings and important notes at the end of this document. 4 July 25, 2013 SAW Components B8803 942.5 MHz SAW Filter Data Sheet Maximum ratings Tstg –40/+85 1) ˚C DC voltage VDC 5 2) V ESD voltage VESD 100 3) V PIN TBD dBm Storage temperature range machine model, 10 pulse Input Power at 880.0 ... 915.0 MHz Continuous wave for 2000h @ 55˚C 1) extended upperlimit: 168h@125˚C acc. to IEC 60068-2-2 Bb 2) 168h Damp Heat Steady State acc. to IEC 60068-2-67 Cy 3) acc. to JESD22-A115A (machine model), 10 negative & 10 positive pulse. Please read cautions and warnings and important notes at the end of this document. 5 July 25, 2013 SAW Components B8803 942.5 MHz SAW Filter Sample Data Transfer function (narrrowband) Transfer function (wideband) Please read cautions and warnings and important notes at the end of this document. 6 July 25, 2013 SAW Components B8803 942.5 MHz SAW Filter Data Sheet Smith charts S11 function S22 function Please read cautions and warnings and important notes at the end of this document. 7 July 25, 2013 SAW Components B8803 942.5 MHz SAW Filter Sample Data References Type B8803 Ordering code B39941-B8803-P810 Marking and package C61157-A8-A3 Packaging F61074-V8237-Z000 Date codes L_1126 S-parameters B8803_NB.s3p, B8803_WB.s3p see file header for port/pin assignment table Soldering profile S_6001 RoHS compatible RoHS-compatible means that products are compatible with the requirements according to Art. 4 (substance restrictions) of Directive 2011/65/EU of the European Parliament and of the Council of June 8th, 2011, on the restriction of the use of certain hazardous substances in electrical and electronic equipment (“Directive”) with due regard to the application of exemptions as per Annex III of the Directive in certain cases. Moldability Before using in overmolding environment, please contact your EPCOS sales office. Matching coils See Inductor pdf-catalog http://www.tdk.co.jp/tefe02/coil.htm#aname1 and Data Library for circuit simulation http://www.tdk.co.jp/etvcl/index.htm For further information please contact your local EPCOS sales office or visit our webpage at www.epcos.com . Published by EPCOS AG Systems, Acoustics, Waves Business Group P.O. Box 80 17 09, 81617 Munich, GERMANY  EPCOS AG 2013. This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices. Please read cautions and warnings and important notes at the end of this document. 8 July 25, 2013 Important notes The following applies to all products named in this publication: 1. 2. 3. 4. 5. 6. 7. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. The warnings, cautions and product-specific notes must be observed. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms of Delivery for Products and Services in the Electrical Industry” published by the German Electrical and Electronics Industry Association (ZVEI). The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CeraLink, CeraPlas, CSMP, CSSP, CTVS, DeltaCap, DigiSiMic, DSSP, FilterCap, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks. 9 July 25, 2013