DK-CSR1010-10169-1A

CSR µEnergy® Development Kits Starter Development Kit Product Overview CSR is the industry leader for Bluetooth Smart solutions delivered through the CSR µEnergy product family. CSR introduces a simplified yet comprehensive development kit for designers who need to get prototypes of their Bluetooth Smart products up and running fast then move quickly to production. Product Highlights The kit provides a complete set of tools for software development, board design and production test:  Target board with CSR uEnergy IC on reference module, USB programming interface and interfaces for breaking out I/O to application-specific sensors and actuators  CSR1010, CSR1011 and CSR1012 variants*  Fully licensed CSR xIDE software development environment  Example applications for popular Bluetooth Smart profiles  Example host applications for iOS and Android platforms  Datasheets for CSR µEnergy ICs  Hardware design guidelines  Manufacturing packs for module reference designs  Production test and configuration tools The Target board is normally powered from the host USB connection but can also be run standalone from an on-board coin cell (not included) to allow power measurements to be made. Applications Human Interface Devices including: Kit Contents  Keyboard  Mouse and touchpad  Remote control The Starter Dev Kit contains the following components: Sports and Fitness devices including:  Heart rate monitor  Target board  Mini-USB cable to connect to Host PC USB port  Setup and Quick Start Guides  CSR µEnergy Starter Dev Kit CD-ROM CS-309362-DC-2  Foot pod  Cycle speed, power and cadence Health devices including: © Cambridge Silicon Radio Limited 2013  Glucose meter CSR µEnergy® Development Kits Starter Development Kit Starter Kit Target Board  Factory-fitted with CSR1010, CSR1011 or CSR1012 module  USB or CR2032 battery powered (link selectable).  USB SPI interface to development PC  1x push-button  1x LED  1x Headers for CSR1010/CSR1012 I/O  2x Headers for CSR1011 I/O  80 x 68 mm PCB area CSR1010 or CSR1012 Module Site CSR1011 Module (site) CSR1010 kit part no. DK-CSR1010-10169 *CSR1011 and CSR1012 kit versions are in development. For tech info visit: forum.csr.com & wiki.csr.com Reference Modules Common features: CSR1010   CE and FCC pre-qualified designs  Single-sided PCB mounting  PCB antenna and passive filter FR4 PCB layout CSR1011 CSR1010 Reference Module  2-layer PCB (25.5 x 18.0 mm) CSR1011 Reference Module  2-layer PCB (35.0 x 20.0 mm) CSR1012 Reference Module  4-layer PCB (17.7 x 7.6 mm active area) CSR1012 A Daughter board featuring 5 representative MEMS parts is in development, which will connect to the I/O Headers of all modules. Ordering Information Visit the website www.csr.com for a list of distributors and representatives [Contact > Sales Representatives] and for further information on other related products. Unless otherwise stated, words and logos marked with ™ or ® are trademarks registered or owned by CSR plc and/or its affiliates. Bluetooth® and the Bluetooth logos are trademarks owned by Bluetooth SIG, Inc. and licensed to CSR. Other products, services and names used in this document may have been trademarked by their respective owners. The publication of this information does not imply that any licence is granted under any patent or other rights owned by CSR plc or its affiliates. CSR reserves the right to make technical changes to its products as part of its development programme. While every care has been taken to ensure the accuracy of the contents of this document, CSR cannot accept responsibility for any errors. Cambridge Silicon Radio Limited. Registered in England and W ales 3665875. | Churchill House, Cambridge Business Park, Cowley Road, Cambridge CB4 0WZ Tel: +44 1223 692000 | Fax: +44 1223 692001 | W eb: www.csr.com | Blog: www.csr.com/blog | Twitter: @CSR_plc CS-309362-DC-2 © Cambridge Silicon Radio Limited 2013