1321001-03

THESE DRAWINGS ARE THE PROPERTY OF QUALTEK ELECTRONICS AND NOT TO BE REPRODUCED FOR OR COMMUNICATED TO A THIRD PARTY WITHOUT THE EXPRESS WRITTEN PERMISSION OF AN OFFICER OF QUALTEK ELECTRONICS. REV. B C REVISION DESCRIPTION Updated Specifications Updated Graphics and Cord Specifications DATE 03-22-11 09-16-11 APPROVED LY LY 915 ± 50mm 10 24 PIN 16 PIN 8 PIN 17 PIN 1 PIN 9 PIN C5 C4 C2 C3 C1 BOTH SIDES MUST BE SOLDERED BEFORE COVERING COPPER FOIL 5 15 1 11 6 P1 P2 COPPER FOIL LABEL CONTROLLED No. 120 ± 20 NOTES: 1. CABLE: UL2919 (28AWGx1PxS+AM)x3C+28AWGx4C+28AWGx1P+AB (85% AL) OUTER JACKET: BLACK, OD: 7.3 ± 0.2mm 2. CONNECTORS: DVI (12+5)P/M - HDB15P/M 3. ELECTRICAL TEST: .100% OPEN SHORT & MISS WIRE TEST . INSULATION RESISTANCE: DC400V/0.01s 10M ohm MIN. . CONDUCTOR RESISTANCE: 3 ohm MAX. 4. PACKING: 1PC/POLYBAG 5. RoHS COMPLIANT PARTS NAME SPECIFICATION STANDARD QTY 1 CABLE UL2919 O.D. : 7.3 ± 0.2mm BLACK COLOR 1 2 CONN 1 DVI (12+5)P/M BLACK AU FLASH. PIN BRASS FRONT GOLD FLASH BACK TIN PLATED 1 3 SCREW #4-40UNC MOLDED BLACK COLOR 2 4 PLASTIC HOOD BLACK 5 SHIELD CASE TIN PLATED 0.4t ID=Ø8.0mm 6 CONN 2 HDB15P/M 3R 15PIN , BLACK COLOR 1 7 SCREW #4-40UNC MOLDED BLACK COLOR 2 8 SHIELD CASE MUST BE SOLDERED 360˚ 9 PLASTIC HOOD BLACK Dim range (mm) Tolerance +/(mm) 0-1 0.15 1-6 0.20 6-18 0.30 18-50 0.50 Qualtek Electronics Corp. WCI DIVISION Part Number: 1321001-03 Description: DVI (12+5)P/M - HDB15P/M UNIT: mm REV. C 50-120 0.70 Drawn / Date Checked / Date Approved / Date 120-250 0.90 250-500 1.20 B. Grubb 01-24-07 01-24-07 JJH / 01-24-07