3021007-06

REV. REVISION DESCRIPTION DATE APPROVED 1830 ± 50 1 4 3 2 1 12.2 ± 0.4 2 3 456 13 12 11 10 9 2 1 7 8 3 P1 P2 4 12.2 ± 0.4 USB 4P(B)/M MOLDING TYPE (MOLD NO: G102-507) FRONT USB 4P(A)/M MOLDING TYPE (MOLD NO: G102-506) FRONT No. 1 PARTS NAME USB 4P(A)/M - CONTACT USB 4P(A)/M - INSULATOR USB 4P(A)/M - SHELL 1 USB 4P(A)/M - SHELL 2 USB 4P(A)/M - COPPER FOIL USB 4P(A)/M - OUTER MOLD USB 4P(B)/M - CONTACT USB 4P(B)/M - INSULATOR USB 4P(B)/M - SHELL 1 USB 4P(B)/M - SHELL 2 USB 4P(B)/M - COPPER FOIL USB 4P(B)/M - OUTER MOLD CABLE MINI TIE POLYBAG SPECIFICATION STANDARD BRASS / GOLD PLATED (CRIMPING TYPE) PBT + G,F / WHITE UL 94V-0 STEEL NICKEL PLATED STEEL NICKEL PLATED WIDTH 5xLENGTH 27 45P PVC / COLOR: BLACK BRASS / GOLD PLATED (CRIMPING TYPE) PBT + G,F / WHITE UL 94V-0 STEEL NICKEL PLATED STEEL NICKEL PLATED WIDTH 5xLENGTH 27 45P PVC / COLOR: BLACK L01009ABK01A PE / BLACK PE: 0.08x140x160 QTY REMARKS 4 1 1 1 1 1 4 1 1 1 1 1 1 2 1 TAPE 100 ± 20 15 PIN OUT P1 1 14 2 3 P2 RED GREEN WHITE BLACK DRAIN BRAID 1 2 3 4 SHELL 4 5 6 7 8 9 10 11 12 13 14 15 2 3 4 SHELL NOTES: 1. CABLE: UL2725 26/28AWG (28AWGx1P+26AWGx2C+FOIL+DW+BD)x1 OD: 4.2 ± 0.2, COLOR: BLACK PRINTING: “E166307 AWM 2725 26/28AWG 80°C 30V VW-1 HI-SPEED USB2.0” 2. CONNECTORS: USB 4P(A) MALE TO USB 4P(B) MALE 3. HOOD: MOLDED TYPE 4. ELECTRICAL TEST: .100% OPEN SHORT & MISS WIRE TEST . INSULATION RESISTANCE: DC400V 10M ohm MIN. . CONDUCTOR RESISTANCE: 3 ohm MAX. 5. PACKING: 1PC/POLYBAG Dim range (mm) 0-1 1-6 6-18 18-50 50-120 120-250 250-500 Tolerance +/(mm) 0.15 0.20 0.30 0.50 0.70 0.90 1.20 Qualtek Electronics Corp. WCI DIVISION Part Number: Description: 3021007-06 USB 4P(A)/M - USB 4P(B)/M Drawn / Date B. Grubb 01-26-07 Checked / Date 01-26-07 Approved / Date JJH / 01-26-07