850-03001

THESE DRAWINGS ARE THE PROPERTY OF QUALTEK ELECTRONICS AND NOT TO BE REPRODUCED FOR OR COMMUNICATED TO A THIRD PARTY WITHOUT THE EXPRESS WRITTEN PERMISSION OF AN OFFICER OF QUALTEK ELECTRONICS. PHYSICAL DIMENSIONS: REVISION REV. B C DESCRIPTION RoHS Compliancy Updated Operating Temp DATE 06-01-06 10-27-09 APPROVED DP LY ELECTRICAL CHARACTERISTICS: 1-1. VOLTAGE RATING...................................115/250VAC 1-2. CURRENT RATING A. @ 115 VAC..........................................3 A RMS MAX B. @ 250 VAC.........................................3 A RMS MAX OPERATING FREQUENCY......................50/60Hz LEAKAGE CURRENT: EACH LINE TO GROUND A. @ 115 VAC 60Hz............................0.50 mA MAX B. @ 250 VAC 50Hz.............................1.00 mA MAX HIPOT RATING (FOR ONE MINUTE) A. LINE TO GROUND...........................2250 VDC B. LINE TO LINE.....................................1450 VDC MINIMUM INSERTION LOSS IN dB: (AT 50 OHM SYSTEM) .01 1 0 .05 6 1 .10 10 15 .15 12 25 .50 20 50 1.0 30 60 5.0 60 45 10 60 50 30 45 50 1 1.90MAX 5 3 Ø0.188 1-3. 1-4. 2 4 1-5. 2.38 ± 0.02 2.77MAX 3.25MAX 1-6. FREQ. MHz COM. MODE dB DIF. MODE dB 1.15MAX 1-7. 1-8. 1-9. OPERATING TEMPERATURE.................-25° TO +100° C SAFETY: RoHS COMPLIANT SCHEMATIC: L1: L2: C1: C2: R: 1.00mH 30.0uH 0.22uF 3300pF 330KΩ Dim range (mm) 0-1 1-6 6-18 18-50 50-120 120-250 250-500 Tolerance +/(mm) 0.15 0.20 0.30 0.50 0.70 0.90 1.20 CONTROLLED Qualtek Electronics Corp. Part Number: Description: PPC DIVISION 850-03/001 EMI FILTER UNIT: in REV. C Approved / Date JJH / 02-10-03 Drawn / Date B.ZHANG 02-10-03 Checked / Date 02-10-03