854-20/021

REVISION THESE DRAWINGS ARE THE PROPERTY OF QUALTEK ELECTRONICS AND NOT TO BE REPRODUCED FOR OR COMMUNICATED TO A THIRD PARTY WITHOUT THE EXPRESS WRITTEN PERMISSION OF AN OFFICER OF QUALTEK ELECTRONICS. DESCRIPTION 3.75 ± 0.02 #8-32 1.54MAX 2. ELECTRICAL SCHEMATIC L: C1: C2: C3: R: 1.0mH 0.22uF 0.33uF 3300pF 2.2MΩ APPROVED 1-2. CURRENT RATING A. @ 115 VAC..........................................20 A RMS MAX B. @ 250 VAC.........................................16 A RMS MAX 1-3. OPERATING FREQUENCY......................50/60Hz 1-4. LEAKAGE CURRENT: EACH LINE TO GROUND A. @ 115 VAC 60Hz............................0.25 mA MAX B. @ 250 VAC 50Hz.............................0.45 mA MAX 1-5. HIPOT RATING (FOR ONE MINUTE) A. LINE TO GROUND...........................2250 VDC B. LINE TO LINE.....................................1450 VDC 1-6. MINIMUM INSERTION LOSS IN dB: (AT 50 OHM SYSTEM) .01 .05 .10 .15 .50 1.0 5.0 10 30 COM. MODE dB 3 10 10 20 35 40 50 55 40 DIF. MODE dB 0 9 9 7 55 50 50 55 40 FREQ. MHz 5.25MAX DATE ELECTRICAL CHARACTERISTICS: 1-1. VOLTAGE RATING...................................115/250VAC SLOTS: 0.255x0.157 3.40MAX 2.0 ± 0.02 4.14MAX 1. PHYSICAL DIMENSIONS REV. 1-7. OPERATING TEMPERATURE.................-25° TO +85° C 1-8. SAFETY: 1-9. RoHS COMPLIANT Dim range (mm) Tolerance +/(mm) 0-1 0.15 1-6 0.20 6-18 0.30 18-50 0.50 CONTROLLED Qualtek Electronics Corp. Part Number: Description: PPC DIVISION 854-20/021 EMI FILTER UNIT: mm 50-120 0.70 Drawn / Date Checked / Date 120-250 0.90 250-500 1.20 R.Nuti 02-01-10 02-01-10 Approved / Date LY / 02-01-10