857-03-047

THESE DRAWINGS ARE THE PROPERTY OF QUALTEK ELECTRONICS AND NOT TO BE REPRODUCED FOR OR COMMUNICATED TO A THIRD PARTY WITHOUT THE EXPRESS WRITTEN PERMISSION OF AN OFFICER OF QUALTEK ELECTRONICS. 1. PHYSICAL DIMENSIONS: 38.0MAX 5.5 ± 0.5 Ø3.3 ± 0.3 REVISION REV. B DESCRIPTION RoHS Compliancy DATE 06-01-06 APPROVED DP ELECTRICAL CHARACTERISTICS: 1-1. VOLTAGE RATING...................................115/250VAC 1-2. CURRENT RATING A. @ 115 VAC..........................................3 A RMS MAX B. @ 250 VAC.........................................3 A RMS MAX OPERATING FREQUENCY......................50/60Hz LEAKAGE CURRENT: EACH LINE TO GROUND A. @ 115 VAC 60Hz............................0.20 mA MAX B. @ 250 VAC 50Hz.............................0.40 mA MAX HIPOT RATING (FOR ONE MINUTE) A. LINE TO GROUND...........................2500 VDC B. LINE TO LINE.....................................1740 VDC MINIMUM INSERTION LOSS IN dB: (AT 50 OHM SYSTEM) .01 / / .05 10 / .10 15 / .15 22 0 .50 30 5 1.0 35 14 5.0 45 40 10 45 45 30 48 38 1-3. 20.50 ± 0.3 40.00 ± 0.5 31.0MAX 50.5MAX 1-4. 1-5. 15.0 ± 0.7 SOLDER 14.0 ± 0.5 16.95 ± 0.5 1-6. FREQ. MHz 40.0 ± 0.1 COM. MODE dB DIF. MODE dB 25.9MAX 8.6 ± 0.5 1-7. 1-8. OPERATING TEMPERATURE.................-25° TO +85° C SAFETY: RoHS COMPLIANT Ø3.6 ± 0.2 R6.0(4X) 2. SCHEMATIC: 30.5 ± 0.1 PANEL CUTOUT Dim range (mm) 0-1 1-6 6-18 18-50 50-120 120-250 250-500 1-9. L: 2.3mH C1: 0.033uF C2: 2200pF Tolerance +/(mm) 0.15 0.20 0.30 0.50 0.70 0.90 1.20 CONTROLLED Qualtek Electronics Corp. Part Number: Description: PPC DIVISION 857-03/047 EMI FILTER UNIT: mm REV. B Approved / Date JJH / 12-06-02 Drawn / Date B.ZHANG 12-06-02 Checked / Date 12-06-02