858-01/019

REVISION THESE DRAWINGS ARE THE PROPERTY OF QUALTEK ELECTRONICS AND NOT TO BE REPRODUCED FOR OR COMMUNICATED TO A THIRD PARTY WITHOUT THE EXPRESS WRITTEN PERMISSION OF AN OFFICER OF QUALTEK ELECTRONICS. REV. B DESCRIPTION DATE 06-01-06 RoHS Compliancy APPROVED DP ELECTRICAL CHARACTERISTICS: 1-1. VOLTAGE RATING...................................115/250VAC 1. PHYSICAL DIMENSIONS 1.94MAX 1.575 ± 0.02 5 2 1.12MAX 1.99MAX Ø0.079(3X) 1 1.79MAX Ø0.13 1.34 CUTOUT (MOUNTING FROM FRONT) 2. ELECTRICAL SCHEMATIC 1.12 ± 0.02 0 CURRENT RATING A. @ 115 VAC..........................................1 A RMS MAX B. @ 250 VAC.........................................1 A RMS MAX 1-3. OPERATING FREQUENCY......................50/60Hz 1-4. LEAKAGE CURRENT: EACH LINE TO GROUND A. @ 115 VAC 60Hz............................0.20 mA MAX B. @ 250 VAC 50Hz.............................0.40 mA MAX 1-5. HIPOT RATING (FOR ONE MINUTE) A. LINE TO GROUND...........................2250 VDC B. LINE TO LINE.....................................1450 VDC 1-6. MINIMUM INSERTION LOSS IN dB: (AT 50 OHM SYSTEM) FREQ. MHz .01 .05 .10 .15 .50 1.0 5.0 10 30 COM. MODE dB 15 25 28 30 35 38 38 38 38 / / 2 5 15 25 38 38 38 DIF. MODE dB 0.02 0 0.85 ± 0.84MAX 1.575 ± 0.005 1-2. 1-7. OPERATING TEMPERATURE.................-25° TO +85° C 1-8. SAFETY: 1-9. RoHS COMPLIANT M3(2x) R0.12(4X) L: 10.5mH C1: 0.1uF C2: 3300pF Dim range (mm) Tolerance +/(mm) 0-1 0.15 1-6 0.20 6-18 0.30 18-50 0.50 CONTROLLED Qualtek Electronics Corp. Part Number: Description: PPC DIVISION 858-01/019 EMI FILTER UNIT: in REV. B 50-120 0.70 Drawn / Date Checked / Date Approved / Date 120-250 0.90 250-500 1.20 B.ZHANG 09-10-01 09-10-01 JJH / 09-10-01