858-10/026

REVISION THESE DRAWINGS ARE THE PROPERTY OF QUALTEK ELECTRONICS AND NOT TO BE REPRODUCED FOR OR COMMUNICATED TO A THIRD PARTY WITHOUT THE EXPRESS WRITTEN PERMISSION OF AN OFFICER OF QUALTEK ELECTRONICS. REV. B DESCRIPTION Ø3.3 ± 0.3 38.0MAX 1-2. CURRENT RATING A. @ 115 VAC..........................................10 A RMS MAX B. @ 250 VAC.........................................10 A RMS MAX 1-3. OPERATING FREQUENCY......................50/60Hz 1-4. LEAKAGE CURRENT: EACH LINE TO GROUND A. @ 115 VAC 60Hz............................0.20 mA MAX B. @ 250 VAC 50Hz.............................0.40 mA MAX 1-5. HIPOT RATING (FOR ONE MINUTE) A. LINE TO GROUND...........................2250 VDC B. LINE TO LINE.....................................1450 VDC 1-6. MINIMUM INSERTION LOSS IN dB: (AT 50 OHM SYSTEM) 50.5MAX 40.00 ±0.5 31.0MAX 20.50 ± 0.3 5.5 ± 0.5 15.0 ± 0.7 SUGGESTED MOUNTING CUTOUT (MOUNTING DIMENSIONS OF SOCKET) 22.86 ± 0.1 .01 .05 .10 .15 .50 1.0 5.0 10 30 COM. MODE dB / 1 2 4 10 13 28 35 40 DIF. MODE dB / 1 2 4 10 15 25 30 40 FREQ. MHz 40.0 ± 0.1 25.9MAX 8.6 ± 0.5 APPROVED DP ELECTRICAL CHARACTERISTICS: 1-1. VOLTAGE RATING...................................115/250VAC 1. MECHANICAL DIMENSIONS SOLDER 14.00 ± 0.5 16.95 ± 0.5 DATE 06-01-06 RoHS Compliancy Ø3.6 ± 0.2 1-7. OPERATING TEMPERATURE.................-25° TO +85° C 1-8. SAFETY: 1-9. RoHS COMPLIANT R6.0(4X) 30.5 ± 0.1 2. ELECTRICAL SCHEMATIC L: 0.2mH C1: 0.1uF C2: 2200pF Dim range (mm) Tolerance +/(mm) 0-1 0.15 1-6 0.20 6-18 0.30 18-50 0.50 CONTROLLED Qualtek Electronics Corp. Part Number: Description: PPC DIVISION 858-10/026 EMI FILTER UNIT: mm REV. B 50-120 0.70 Drawn / Date Checked / Date Approved / Date 120-250 0.90 250-500 1.20 B.ZHANG 01-06-03 01-06-03 JJH / 01-06-03