858-10015

THESE DRAWINGS ARE THE PROPERTY OF QUALTEK ELECTRONICS AND NOT TO BE REPRODUCED FOR OR COMMUNICATED TO A THIRD PARTY WITHOUT THE EXPRESS WRITTEN PERMISSION OF AN OFFICER OF QUALTEK ELECTRONICS. 1. PHYSICAL DIMENSIONS Ø3.3(2X) REVISION REV. B C DESCRIPTION RoHS Compliancy Updated Specifications DATE 06-01-06 10-13-08 APPROVED DP LY 54.0MAX 50.0MAX 39.5MAX ELECTRICAL CHARACTERISTICS: 1-1. VOLTAGE RATING...................................115/250VAC 1-2. CURRENT RATING A. @ 115 VAC..........................................10 A RMS MAX B. @ 250 VAC.........................................10 A RMS MAX OPERATING FREQUENCY......................50/60Hz LEAKAGE CURRENT: EACH LINE TO GROUND A. @ 115 VAC 60Hz............................0.20 mA MAX B. @ 250 VAC 50Hz.............................0.40 mA MAX HIPOT RATING (FOR ONE MINUTE) A. LINE TO GROUND...........................2250 VDC B. LINE TO LINE.....................................1450 VDC MINIMUM INSERTION LOSS IN dB: (AT 50 OHM SYSTEM) .01 / / .05 1 1 .10 2 2 .15 4 4 .50 10 10 1.0 13 15 5.0 28 25 10 35 30 30 40 40 1-3. 52.0 ± 0.5 40.0 ± 0.5 1-4. 28.4MAX 1-5. 1-6. FREQ. MHz 40.0 ± 0.13 28.45 ± 0 0.5 COM. MODE dB DIF. MODE dB 21.3MAX M3(2X) 21.6 ± 0.5 0 1-7. 1-8. 1-9. OPERATING TEMPERATURE.................-25° TO +100° C SAFETY: RoHS COMPLIANT R3.0(4X) PANEL CUTOUT (MOUNTING FROM FRONT) 2. ELECTRICAL SCHEMATIC L: 0.2mH C1: 0.1uF C2: 2200pF Dim range (mm) 0-1 1-6 6-18 18-50 50-120 120-250 250-500 Tolerance +/(mm) 0.15 0.20 0.30 0.50 0.70 0.90 1.20 CONTROLLED Qualtek Electronics Corp. Part Number: Description: PPC DIVISION 858-10/015 EMI FILTER UNIT: mm REV. C Approved / Date JJH / 01-06-03 Drawn / Date B.ZHANG 01-06-03 Checked / Date 01-06-03