858-20/069

REVISION THESE DRAWINGS ARE THE PROPERTY OF QUALTEK ELECTRONICS AND NOT TO BE REPRODUCED FOR OR COMMUNICATED TO A THIRD PARTY WITHOUT THE EXPRESS WRITTEN PERMISSION OF AN OFFICER OF QUALTEK ELECTRONICS. REV. B C DESCRIPTION APPROVED DP DP ELECTRICAL CHARACTERISTICS: 1-1. VOLTAGE RATING...................................125/250VAC 1. PHYSICAL DIMENSIONS 30.0 66.0MAX Ø3.5 1-2. CURRENT RATING A. @ 125 VAC..........................................20 A RMS MAX B. @ 250 VAC.........................................16 A RMS MAX 1-3. OPERATING FREQUENCY......................50/60Hz 1-4. LEAKAGE CURRENT: EACH LINE TO GROUND A. @ 125 VAC 60Hz............................0.20 mA MAX B. @ 250 VAC 50Hz.............................0.40 mA MAX 1-5. HIPOT RATING (FOR ONE MINUTE) A. LINE TO GROUND...........................2250 VDC B. LINE TO LINE.....................................1450 VDC 1-6. MINIMUM INSERTION LOSS IN dB: (AT 50 OHM SYSTEM) 42.0 53.0 34.5MAX 6.3X0.8 3.5 42.0 ± 0.1 M3 R4.0MAX .01 .05 .10 .15 .50 1.0 5.0 10 30 COM. MODE dB / 2 5 8 10 15 25 30 35 DIF. MODE dB / 0 2 2 10 15 40 40 40 FREQ. MHz 26.5 ± 0.5 0 81.0MAX 26.5MAX DATE 06-01-06 11-28-07 RoHS Compliancy Updated Specifications 34.5 ± 0.5 0 PANEL CUTOUT 1-7. OPERATING TEMPERATURE.................-25° TO +85° C 1-8. SAFETY: 1-9. RoHS COMPLIANT 2. ELECTRICAL SCHEMATIC L: 0.3mH C1: 0.1uF C2: 2200pF Dim range (mm) Tolerance +/(mm) 0-1 0.15 1-6 0.20 6-18 0.30 18-50 0.50 50-120 0.70 120-250 0.90 250-500 1.20 CONTROLLED Qualtek Electronics Corp. Part Number: Description: PPC DIVISION 858-20/069 EMI FILTER UNIT: mm REV. C Drawn / Date Checked / Date Approved / Date B.ZHANG 06-16-04 06-16-04 JJH / 06-16-04