860-04/004

REVISION THESE DRAWINGS ARE THE PROPERTY OF QUALTEK ELECTRONICS AND NOT TO BE REPRODUCED FOR OR COMMUNICATED TO A THIRD PARTY WITHOUT THE EXPRESS WRITTEN PERMISSION OF AN OFFICER OF QUALTEK ELECTRONICS. REV. B 1.75MAX. 1.417 ± 0.02 1. PHYSICAL DIMENSIONS 1.29MAX. 1.14 ± 0.012 0 2.25MAX. CURRENT RATING A. @ 115 VAC..........................................4 A RMS MAX B. @ 250 VAC.........................................4 A RMS MAX 1-3. OPERATING FREQUENCY......................50/60Hz 1-4. LEAKAGE CURRENT: EACH LINE TO GROUND A. @ 115 VAC 60Hz............................0.20 mA MAX B. @ 250 VAC 50Hz.............................0.40 mA MAX 1-5. HIPOT RATING (FOR ONE MINUTE) A. LINE TO GROUND...........................2250 VDC B. LINE TO LINE.....................................1450 VDC 1-6. MINIMUM INSERTION LOSS IN dB: (AT 50 OHM SYSTEM) .01 .05 .10 .15 .50 1.0 5.0 10 30 COM. MODE dB / / 10 12 20 30 42 45 50 DIF. MODE dB / / 3 5 12 18 40 55 50 FREQ. MHz M3 R0.14 1.30 ± 0.012 0 PANEL CUTOUT 1-7. OPERATING TEMPERATURE.................-25° TO +85° C 1-8. SAFETY: 1-9. RoHS COMPLIANT 2. ELECTRICAL SCHEMATIC L: 0.7mH Lg: 0.4mH C1: 0.1uF C2: 2200pF APPROVED DP 1-2. 1.65MAX. 2.10MAX. DATE 06-01-06 RoHS Compliancy ELECTRICAL CHARACTERISTICS: 1-1. VOLTAGE RATING...................................115/250VAC Ø0.126 1.14MAX. DESCRIPTION Dim range (mm) Tolerance +/(mm) 0-1 0.15 1-6 0.20 6-18 0.30 18-50 0.50 CONTROLLED Qualtek Electronics Corp. Part Number: Description: PPC DIVISION 860-04/004 EMI FILTER UNIT: in REV. B 50-120 0.70 Drawn / Date Checked / Date Approved / Date 120-250 0.90 250-500 1.20 B.Zhang 09-12-01 09-12-01 JJH / 09-12-01