862-06/002

REVISION THESE DRAWINGS ARE THE PROPERTY OF QUALTEK ELECTRONICS AND NOT TO BE REPRODUCED FOR OR COMMUNICATED TO A THIRD PARTY WITHOUT THE EXPRESS WRITTEN PERMISSION OF AN OFFICER OF QUALTEK ELECTRONICS. REV. B C D 1. PHYSICAL DIMENSIONS DESCRIPTION 27.0 ± 0.08 I 5 O 1 FUSE HOLDER 54.5 ± 0.5 61.5 ± 1.0 CURRENT RATING A. @ 115 VAC..........................................6 A RMS MAX B. @ 250 VAC.........................................6 A RMS MAX 1-3. OPERATING FREQUENCY......................50/60Hz 1-4. LEAKAGE CURRENT: EACH LINE TO GROUND A. @ 115 VAC 60Hz............................0.25 mA MAX B. @ 250 VAC 50Hz.............................0.45 mA MAX 1-5. HIPOT RATING (FOR ONE MINUTE) A. LINE TO GROUND...........................2250 VDC B. LINE TO LINE.....................................1450 VDC 1-6. MINIMUM INSERTION LOSS IN dB: (AT 50 OHM SYSTEM) .01 .05 .10 .15 .50 1.0 5.0 10 30 COM. MODE dB / / 15 16 25 30 42 45 40 DIF. MODE dB / / 6 6 30 48 40 40 40 FREQ. MHz 11.0 ± 0.5 4 64.5 ± 0.5 1-2. PANEL CUTOUT R1.0 MAX(4X) 14.5 ± 0.5 29.1 ± 0.5 66.0 ± 0.08 G 3 6.3x0.8(3X) 26.5 ± 0.4 1-7. OPERATING TEMPERATURE.................-25° TO +100° C 1-8. SAFETY: 1-9. RoHS COMPLIANT 2. ELECTRICAL SCHEMATIC 1 2 5 L I N E F SW APPROVED DP LY LY ELECTRICAL CHARACTERISTICS: 1-1. VOLTAGE RATING...................................115/250VAC 67.3 ± 0.5 2 DATE 06-01-06 01-13-09 05-14-21 RoHS Compliancy Updated Operating Temperature Updated Graphics R C1 C2 L NOTES: 1. MOUNTING PANEL THICKESS 1.0mm TO 1.8mm C2 3 C1 L O A D 4 G L: C1: C2: R: 1.3mH 0.1uF 3300pF 2.2MΩ Dim range (mm) Tolerance +/(mm) 0-1 0.15 1-6 0.20 6-18 0.30 18-50 0.50 CONTROLLED Qualtek Electronics Corp. Part Number: Description: PPC DIVISION 862-06/002 EMI FILTER UNIT: mm REV. D 50-120 0.70 Drawn / Date Checked / Date Approved / Date 120-250 0.90 250-500 1.20 B.ZHANG 01-15-03 01-15-03 JJH / 01-15-03