862-06/003

REVISION THESE DRAWINGS ARE THE PROPERTY OF QUALTEK ELECTRONICS AND NOT TO BE REPRODUCED FOR OR COMMUNICATED TO A THIRD PARTY WITHOUT THE EXPRESS WRITTEN PERMISSION OF AN OFFICER OF QUALTEK ELECTRONICS. REV. B C 1. PHYSICAL DIMENSIONS R1.0MAX 29.1 ± 1.0 1-2. CURRENT RATING A. @ 115 VAC..........................................6 A RMS MAX B. @ 250 VAC.........................................4 A RMS MAX 1-3. OPERATING FREQUENCY......................50/60Hz 1-4. LEAKAGE CURRENT: EACH LINE TO GROUND A. @ 115 VAC 60Hz............................0.25 mA MAX B. @ 250 VAC 50Hz.............................0.45 mA MAX 1-5. HIPOT RATING (FOR ONE MINUTE) A. LINE TO GROUND...........................2250 VDC B. LINE TO LINE.....................................1450 VDC 1-6. MINIMUM INSERTION LOSS IN dB: (AT 50 OHM SYSTEM) .01 .05 .10 .15 .50 1.0 5.0 10 30 COM. MODE dB / / 15 16 25 30 42 45 40 DIF. MODE dB / / 6 6 30 48 40 40 40 10.5 ± 1.0 55.2MAX 15.0 ± 1.0 60.5MAX FREQ. MHz 65.3MAX 6.3 2. ELECTRICAL SCHEMATIC L: C1: C2: R: NOTES: 1. MOUNTING PANEL THICKESS 0.8mm TO 1.6mm 1.3mH 0.1uF 3300pF 2.2MΩ APPROVED DP LY ELECTRICAL CHARACTERISTICS: 1-1. VOLTAGE RATING...................................115/250VAC 66.0 ± 0.08 PANEL CUTOUT FUSE HOLDER DATE 06-01-06 03-19-12 RoHS Compliancy Updated Specifications 27.0 ± 0.08 67.3 ± 1.0 DESCRIPTION 26.9MAX 1-7. OPERATING TEMPERATURE.................-25° TO +100° C 1-8. SAFETY: 1-9. RoHS COMPLIANT Dim range (mm) Tolerance +/(mm) 0-1 0.15 1-6 0.20 6-18 0.30 18-50 0.50 CONTROLLED Qualtek Electronics Corp. Part Number: Description: PPC DIVISION 862-06/003 EMI FILTER UNIT: mm REV. C 50-120 0.70 Drawn / Date Checked / Date Approved / Date 120-250 0.90 250-500 1.20 B.ZHANG 01-16-03 01-16-03 JJH / 01-16-03