862-06/007

REVISION THESE DRAWINGS ARE THE PROPERTY OF QUALTEK ELECTRONICS AND NOT TO BE REPRODUCED FOR OR COMMUNICATED TO A THIRD PARTY WITHOUT THE EXPRESS WRITTEN PERMISSION OF AN OFFICER OF QUALTEK ELECTRONICS. * SUGGESTED THICKNESS OF MOUNTING PANEL IS FROM 0.04 TO 0.07 INCH DESCRIPTION 2.60 ± 0.003 1.15 2.17 2.24 0.57 R0.04MAX 1-2. CURRENT RATING A. @ 115V VAC ................................................6 A RMS MAX B. @ 250 VAC .................................................6 A RMS MAX 1-3. OPERATING FREQUENCY......................50/60Hz 1-4. LEAKAGE CURRENT: EACH LINE TO GROUND A. @ 115 VAC 60Hz............................0.25 mA MAX B. @ 250 VAC 50Hz.............................0.45 mA MAX 1-5. HIPOT RATING (FOR ONE MINUTE) A. LINE TO GROUND...........................2250 VDC B. LINE TO LINE.....................................1450 VDC 1-6. MINIMUM INSERTION LOSS IN dB: (AT 50 OHM SYSTEM) .01 .05 .10 .15 .50 1.0 5.0 10 30 COM. MODE db / / 15 16 25 30 42 45 40 DIF. MODE db / / 6 6 30 48 40 40 40 FREQ. MHz G 3 0.43 4 2.57(TYP.) 1.06MAX SCHEMATIC: L: 1.3mH C1: 0.1uF C2: 3300pF R: 2.2MΩ APPROVED DP ELECTRICAL CHARACTERISTICS: 1-1. VOLTAGE RATING...................................115/250VAC * SUGGEST MOUNTING CUTOUT FUSE HOLDER DATE 06-01-06 RoHS Compliancy 1.063 ± 0.003 PHYSICAL DIMENSIONS: 2.65 REV. B 1-7. OPERATING TEMPERATURE.................-25° TO +85° C 1-8. SAFETY: 1-9. RoHS COMPLIANT Dim range (mm) Tolerance +/(mm) 0-1 0.15 1-6 0.20 6-18 0.30 18-50 0.50 CONTROLLED Qualtek Electronics Corp. Part Number: Description: PPC DIVISION 862-06/007 MULTI-FUNCTION MODULE FILTER UNIT: in REV. B 50-120 0.70 Drawn / Date Checked / Date Approved / Date 120-250 0.90 250-500 1.20 B.ZHANG 01-16-03 01-16-03 JJH / 01-16-03