862-06002

THESE DRAWINGS ARE THE PROPERTY OF QUALTEK ELECTRONICS AND NOT TO BE REPRODUCED FOR OR COMMUNICATED TO A THIRD PARTY WITHOUT THE EXPRESS WRITTEN PERMISSION OF AN OFFICER OF QUALTEK ELECTRONICS. REVISION REV. B C DESCRIPTION RoHS Compliancy Updated Operating Temperature DATE 06-01-06 01-13-09 APPROVED DP LY 1. PHYSICAL DIMENSIONS 2.65 R0.04MAX. 1.063 ± 0.003 ELECTRICAL CHARACTERISTICS: 1-1. VOLTAGE RATING...................................115/250VAC 1-2. CURRENT RATING A. @ 115 VAC..........................................6 A RMS MAX B. @ 250 VAC.........................................6 A RMS MAX OPERATING FREQUENCY......................50/60Hz LEAKAGE CURRENT: EACH LINE TO GROUND A. @ 115 VAC 60Hz............................0.25 mA MAX B. @ 250 VAC 50Hz.............................0.45 mA MAX HIPOT RATING (FOR ONE MINUTE) A. LINE TO GROUND...........................2250 VDC B. LINE TO LINE.....................................1450 VDC MINIMUM INSERTION LOSS IN dB: (AT 50 OHM SYSTEM) .01 / / .05 / / .10 15 6 .15 16 6 .50 25 30 1.0 30 48 5.0 42 40 10 45 40 30 40 40 1-3. 1-4. 1.15 FUSE HOLDER 2.6 ± 0.003 PANEL CUTOUT 1-5. 0.57 1-6. FREQ. MHz 2.38 COM. MODE dB 2.17 DIF. MODE dB 1-7. OPERATING TEMPERATURE.................-25° TO +100° C SAFETY: RoHS COMPLIANT 0.43 1-8. 2.57TYP 2. ELECTRICAL SCHEMATIC 0.25 1.06MAX. Dim range (mm) 0-1 1-6 6-18 18-50 50-120 120-250 250-500 1-9. L: C1: C2: R: NOTES: 1. MOUNTING PANEL THICKESS 0.04 TO 0.07 INCHES, 1.3mH 0.1uF 3300pF 2.2MΩ Tolerance +/(mm) 0.15 0.20 0.30 0.50 0.70 0.90 1.20 CONTROLLED Qualtek Electronics Corp. Part Number: Description: PPC DIVISION 862-06/002 EMI FILTER UNIT: in REV. C Approved / Date JJH / 01-15-03 Drawn / Date B.ZHANG 01-15-03 Checked / Date 01-15-03