869-06007

THESE DRAWINGS ARE THE PROPERTY OF QUALTEK ELECTRONICS AND NOT TO BE REPRODUCED FOR OR COMMUNICATED TO A THIRD PARTY WITHOUT THE EXPRESS WRITTEN PERMISSION OF AN OFFICER OF QUALTEK ELECTRONICS. 1. PHYSICAL DIMENSIONS 0.945 ± 0.02 REVISION REV. B DESCRIPTION RoHS Compliancy DATE 06-01-06 APPROVED DP ELECTRICAL CHARACTERISTICS: 1-1. VOLTAGE RATING...................................115/250VAC 0.84MAX. 1-2. CURRENT RATING A. @ 115 VAC..........................................8 A RMS MAX B. @ 250 VAC.........................................6 A RMS MAX OPERATING FREQUENCY......................50/60Hz LEAKAGE CURRENT: EACH LINE TO GROUND A. @ 115 VAC 60Hz............................0.20 mA MAX B. @ 250 VAC 50Hz.............................0.40 mA MAX HIPOT RATING (FOR ONE MINUTE) A. LINE TO GROUND...........................2250 VDC B. LINE TO LINE.....................................1450 VDC MINIMUM INSERTION LOSS IN dB: (AT 50 OHM SYSTEM) .01 / / .05 6 1 .10 10 2 .15 12 4 .50 18 10 1.0 24 15 5.0 35 35 10 40 40 30 40 40 1-3. 1-4. 0.142 ± 0.04 0.02 1.22 ± 0.02 0.862 ± 0.004 1-5. 1.66MAX. 1-6. FREQ. MHz 2.08MAX. R0.08MAX. 1.12 ± 0.012 0 PANEL CUTOUT 0.04~0.063 COM. MODE dB DIF. MODE dB 1-7. 1-8. OPERATING TEMPERATURE.................-25° TO +85° C SAFETY: RoHS COMPLIANT 1.12MAX. 1-9. 2. ELECTRICAL SCHEMATIC L: C1: C2: R: 0.8mH 0.1uF 2200pF 1MΩ Dim range (mm) 0-1 1-6 6-18 18-50 50-120 120-250 250-500 Tolerance +/(mm) 0.15 0.20 0.30 0.50 0.70 0.90 1.20 CONTROLLED Qualtek Electronics Corp. Part Number: Description: PPC DIVISION 869-06/007 EMI FILTER UNIT: in REV. B Approved / Date JJH / 09-17-01 Drawn / Date B.ZHANG 09-17-01 Checked / Date 09-17-01