870-03/004

REVISION THESE DRAWINGS ARE THE PROPERTY OF QUALTEK ELECTRONICS AND NOT TO BE REPRODUCED FOR OR COMMUNICATED TO A THIRD PARTY WITHOUT THE EXPRESS WRITTEN PERMISSION OF AN OFFICER OF QUALTEK ELECTRONICS. REV. B 1. PHYSICAL DIMENSIONS DESCRIPTION 1-2. CURRENT RATING A. @ 115 VAC..........................................3 A RMS MAX B. @ 250 VAC.........................................3 A RMS MAX 1-3. OPERATING FREQUENCY......................50/60Hz 1-4. LEAKAGE CURRENT: EACH LINE TO GROUND A. @ 115 VAC 60Hz............................0.25 mA MAX B. @ 250 VAC 50Hz.............................0.45 mA MAX 1-5. HIPOT RATING (FOR ONE MINUTE) A. LINE TO GROUND...........................2250 VDC B. LINE TO LINE.....................................1450 VDC 1-6. MINIMUM INSERTION LOSS IN dB: (AT 50 OHM SYSTEM) 4.0MIN 2.04MAX 1.575 ± 0.02 BROWN BLUE 2.55MAX 0.63 0.005 Ø0.157 0.91 ± 0 1.79MAX 1.575 ± 0.005 1.22 ± 0.005 PANEL CUTOUT R0.234 2. ELECTRICAL SCHEMATIC L1: L2: C1: C2: R: 6.5mH 4.5mH 0.33uF 3300pF 2.2MΩ APPROVED LY 06-01-06 ELECTRICAL CHARACTERISTICS: 1-1. VOLTAGE RATING...................................115/250VAC #6-32X1/4 G/Y DATE RoHS Compliancy FREQ. MHz .01 .05 .10 .15 .50 1.0 5.0 10 30 COM. MODE dB 15 25 45 50 70 70 60 55 30 DIF. MODE dB 0 6 25 35 48 55 55 55 40 1-7. OPERATING TEMPERATURE.................-25° TO +100° C 1-8. SAFETY: 1-9. RoHS COMPLIANT Dim range (mm) Tolerance +/(mm) 0-1 0.15 1-6 0.20 6-18 0.30 18-50 0.50 CONTROLLED Qualtek Electronics Corp. Part Number: Description: PPC DIVISION 870-03/004 EMI FILTER UNIT: in REV. B 50-120 0.70 Drawn / Date Checked / Date Approved / Date 120-250 0.90 250-500 1.20 B.Zhang 09-12-01 09-12-01 JJH / 09-12-01