870-06/007

REVISION THESE DRAWINGS ARE THE PROPERTY OF QUALTEK ELECTRONICS AND NOT TO BE REPRODUCED FOR OR COMMUNICATED TO A THIRD PARTY WITHOUT THE EXPRESS WRITTEN PERMISSION OF AN OFFICER OF QUALTEK ELECTRONICS. REV. B DESCRIPTION #6-32x1/4 1-2. CURRENT RATING A. @ 115 VAC..........................................6 A RMS MAX B. @ 250 VAC.........................................6 A RMS MAX 1-3. OPERATING FREQUENCY......................50/60Hz 1-4. LEAKAGE CURRENT: EACH LINE TO GROUND A. @ 115 VAC 60Hz............................0.50 mA MAX B. @ 250 VAC 50Hz.............................1.0 mA MAX 1-5. HIPOT RATING (FOR ONE MINUTE) A. LINE TO GROUND...........................2250 VDC B. LINE TO LINE.....................................1450 VDC 1-6. MINIMUM INSERTION LOSS IN dB: (AT 50 OHM SYSTEM) 6.0 ± 0.5 2.08MAX 1.575 ± 0.02 3 BROWN 5 BLUE 3.1MAX 0.63 Ø0.157 0.91 ± 0.005 0 1.79MAX 1.575 ± 0.005 0.25 ± 0.13 STRIPPED & TINNED (3 PCS) R0.234 FREQ. MHz .01 .05 .10 .15 .50 1.0 5.0 10 30 COM. MODE dB 10 20 45 55 60 60 60 60 60 DIF. MODE dB 0 5 30 40 60 60 60 60 60 1-7. OPERATING TEMPERATURE.................-25° TO +85° C 1.22 ± 0.005 1-8. SAFETY: PANEL CUTOUT 1-9. RoHS COMPLIANT 2. ELECTRICAL SCHEMATIC L1: L2: C1: C2: C3: C4: R: APPROVED DP 06-01-06 ELECTRICAL CHARACTERISTICS: 1-1. VOLTAGE RATING...................................115/250VAC 1. PHYSICAL DIMENSIONS G G/Y DATE RoHS Compliancy 8.0mH 2.3mH 0.66uF 4700pF 0.47uF 2200pF 470KΩ Dim range (mm) Tolerance +/(mm) 0-1 0.15 1-6 0.20 6-18 0.30 18-50 0.50 CONTROLLED Qualtek Electronics Corp. Part Number: Description: PPC DIVISION 870-06/007 EMI FILTER UNIT: in REV. B 50-120 0.70 Drawn / Date Checked / Date Approved / Date 120-250 0.90 250-500 1.20 B.Zhang 09-17-01 09-17-01 JJH / 09-17-01