879-03/002

REVISION THESE DRAWINGS ARE THE PROPERTY OF QUALTEK ELECTRONICS AND NOT TO BE REPRODUCED FOR OR COMMUNICATED TO A THIRD PARTY WITHOUT THE EXPRESS WRITTEN PERMISSION OF AN OFFICER OF QUALTEK ELECTRONICS. REV. B DESCRIPTION Ø3.3 ± 0.3 38.0MAX 1-2. CURRENT RATING A. @ 115 VAC..........................................3 A RMS MAX B. @ 250 VAC.........................................3 A RMS MAX 1-3. OPERATING FREQUENCY......................50/60Hz 1-4. LEAKAGE CURRENT: EACH LINE TO GROUND A. @ 115 VAC 60Hz............................0.20 mA MAX B. @ 250 VAC 50Hz............................0.40 mA MAX 1-5. HIPOT RATING (FOR ONE MINUTE) A. LINE TO GROUND...........................2250 VDC B. LINE TO LINE.....................................1450 VDC 1-6. MINIMUM INSERTION LOSS IN dB: (AT 50 OHM SYSTEM) 50.5MAX 40.0 ± 0.5 18.6 ± 0.3 20.5 ± 0.3 31.0MAX 3.6 ± 0.5 25.0MAX 9.8 ± 0.5 1.0x0.5t(2X) 22.86 ± 0.1 40.0 ± 0.1 R6.0(4X) 21.3 ± 0.1 13.5 ± 0.4 21.3 ± 0.5 APPROVED DP ELECTRICAL CHARACTERISTICS: 1-1. VOLTAGE RATING...................................115/250VAC 1. PHYSICAL DIMENSIONS: 1.3x0.8t(2X) DATE 06-01-06 RoHS Compliancy 18.6 ± 0.1 Ø1.4(2X) .01 .05 .10 .15 .50 1.0 5.0 10 30 COM. MODE dB / 12 18 20 25 30 38 40 40 DIF. MODE dB / 0 2 4 12 18 38 40 40 FREQ. MHz 20.5 ± 0.1 Ø1.7(2X) PCB FIXING DETAILS 1-7. OPERATING TEMPERATURE.................-25° TO +85° C 1-8. SAFETY: 1-9. RoHS COMPLIANT Ø3.6 ± 0.2 30.5 ± 0.1 PANEL CUTOUT 2. SCHEMATIC: L: 2.5mH C1: 0.1uF C2: 2200pF Dim range (mm) Tolerance +/(mm) 0-1 0.15 1-6 0.20 6-18 0.30 18-50 0.50 CONTROLLED Qualtek Electronics Corp. Part Number: Description: PPC DIVISION 879-03/002 EMI FILTER UNIT: mm REV. B 50-120 0.70 Drawn / Date Checked / Date Approved / Date 120-250 0.90 250-500 1.20 B.Zhang 09-12-01 09-12-01 JJH / 09-12-01