880-03/005

REVISION THESE DRAWINGS ARE THE PROPERTY OF QUALTEK ELECTRONICS AND NOT TO BE REPRODUCED FOR OR COMMUNICATED TO A THIRD PARTY WITHOUT THE EXPRESS WRITTEN PERMISSION OF AN OFFICER OF QUALTEK ELECTRONICS. REV. B C 60.0 ± 0.5 0 29.2 ± 0.5 0 40.5 ± 0.5 50.0 ± 0.5 1-2. CURRENT RATING A. @ 115 VAC..........................................3 A RMS MAX B. @ 250 VAC.........................................3 A RMS MAX 1-3. OPERATING FREQUENCY......................50/60Hz 1-4. LEAKAGE CURRENT: EACH LINE TO GROUND A. @ 115 VAC 60Hz............................0.20 mA MAX B. @ 250 VAC 50Hz.............................0.40 mA MAX 1-5. HIPOT RATING (FOR ONE MINUTE) A. LINE TO GROUND...........................2250 VDC B. LINE TO LINE.....................................1450 VDC 1-6. MINIMUM INSERTION LOSS IN dB: (AT 50 OHM SYSTEM) 65.0 ± 1.0 55.2 ± 0.8 14.5 ± 1.0 Ø3.3 ± 0.2(2X) .01 .05 .10 .15 .50 1.0 5.0 10 30 COM. MODE dB 2 10 12 15 30 35 35 40 25 DIF. MODE dB / 2 5 8 15 20 30 35 35 FREQ. MHz 6.3X0.8(3X) 28.7 ± 0.5 2.0mH 0.22uF 2200pF 1.0MΩ 1-7. OPERATING TEMPERATURE.................-25° TO +100° C 1-8. SAFETY: 1-9. USE 5X20mm FUSE (NOT INCLUDED) 1-10. RoHS COMPLIANT Dim range (mm) Tolerance +/(mm) 0-1 0.15 1-6 0.20 6-18 0.30 18-50 0.50 2. ELECTRICAL SCHEMATIC L: C1: C2: R: APPROVED DP LY ELECTRICAL CHARACTERISTICS: 1-1. VOLTAGE RATING...................................115/250VAC PANEL CUTOUT M3(2X) 59.5 ± 0.5 DATE 06-01-06 11-01-22 RoHS Compliancy Updated Specifications 40.5 ± 0.1 R2.5MAX(4X) 1. PHYSICAL DIMENSIONS 65.5 ± 0.5 DESCRIPTION CONTROLLED Qualtek Electronics Corp. Part Number: Description: PPC DIVISION 880-03/005 EMI FILTER UNIT: mm REV. C 50-120 0.70 Drawn / Date Checked / Date Approved / Date 120-250 0.90 250-500 1.20 B.ZHANG 03-18-04 03-18-04 JJH / 03-18-04