882-03/003

REVISION THESE DRAWINGS ARE THE PROPERTY OF QUALTEK ELECTRONICS AND NOT TO BE REPRODUCED FOR OR COMMUNICATED TO A THIRD PARTY WITHOUT THE EXPRESS WRITTEN PERMISSION OF AN OFFICER OF QUALTEK ELECTRONICS. DESCRIPTION 54.0 ± 0.5 0.2 28.5 ± 0 L ± 0.2 0 55.0 ± 1.0 1-2. CURRENT RATING A. @ 115 VAC..........................................3 A RMS MAX B. @ 250 VAC.........................................3 A RMS MAX 1-3. OPERATING FREQUENCY......................50/60Hz 1-4. LEAKAGE CURRENT: EACH LINE TO GROUND A. @ 115 VAC 60Hz............................0.20 mA MAX B. @ 250 VAC 50Hz.............................0.40 mA MAX 1-5. HIPOT RATING (FOR ONE MINUTE) A. LINE TO GROUND...........................2250 VDC B. LINE TO LINE.....................................1450 VDC 1-6. MINIMUM INSERTION LOSS IN dB: (AT 50 OHM SYSTEM) .01 .05 .10 .15 .50 1.0 5.0 10 30 COM. MODE dB / 12 18 20 25 30 38 40 40 DIF. MODE dB / 1 2 4 12 18 38 40 40 FREQ. MHz 51.1 ± 1.0 3.0 ± 0.3 APPROVED DP LY ELECTRICAL CHARACTERISTICS: 1-1. VOLTAGE RATING...................................115/250VAC 41.0 ± 0.5 27.9 ± 0.5 DATE 06-01-06 07-28-16 RoHS Compliancy Updated Temp Rating, Insertion Loss, and Notes 46.0 ± 0.5 2.0 ± 0.3 58.0 ± 0.5 1. PHYSICAL DIMENSIONS 32.0 ± 0.5 28.0 ± 0.5 REV. B C R2.0MAX (4X) L ACCORDING TO PANEL THICKNESS 0.8~2.0mm L=55.9 2.1~3.2mm L=56.2 PANEL CUTOUT (MOUNTING FROM FRONT) 2. ELECTRICAL SCHEMATIC L: Cx: Cy: R: 2.5mH 0.1uF 2200pF 1.0MΩ 1-7. OPERATING TEMPERATURE.................-25° TO +100° C (DERATING ABOVE 40˚C) 1-8. SAFETY: 1-9. FUSE SIZE: 5x20mm (FUSES NOT INCLUDED) 1-10. RoHS COMPLIANT Dim range (mm) Tolerance +/(mm) 0-1 0.15 1-6 0.20 6-18 0.30 18-50 0.50 CONTROLLED Qualtek Electronics Corp. Part Number: Description: PPC DIVISION 882-03/003 EMI FILTER UNIT: mm REV. C 50-120 0.70 Drawn / Date Checked / Date Approved / Date 120-250 0.90 250-500 1.20 B.ZHANG 02-06-03 02-06-03 JJH / 02-06-03